开云体育

Object names need to be padded to 9 characters.?? The good packet is fully padded, the bad packet is only padded to 8 characters. aprs101.pdf (google it) is your friend when it comes to

Thank you. In my linux log file time is preceded by "@", which is why it didn't occur to me. Now I understand better your Subject: "#windows".

z shows the time, same as in the other packet

Why is there a "z" in your latitude, one wonders.

2023-03-25 15:06:27 CDT: KB0RPJ-10 ( https://aprs.fi/?c=raw&limit=&call=KB0RPJ-10 )

Shouldn't that be ... symbol="igate" overlay=R ... ?

Hello David, direwolf is started by the SDR software OpenWebRX and is fed via the sdr, not via an audio device. I have no influence on the start parameters. I can't check the entries in the log right

Hello Hiermur, Ok.. got it. Please close that Github issue as I highly doubt this is a bug in Direwolf but more of a misunderstanding or configuration error. According to aprs.fi (

Hello, sry, I thought you meant I should post my concern here. Groups.io was not responding yesterday, hence the double post. The receiver running Direwolf is DB0DAN. The receipt of DB0HWI was

Hello Hiermu, You first created a Git issue ( https://github.com/wb2osz/direwolf/issues/455 ) asking this question which I responded to. Then you have posted two separate emails to the Direwolf group

Hello, I use direwolf under OpenWebRX and have a question about APRS reporting via aprs-is. In contrast to the previously used software (ui-view32), no digipeaters are reported. As a result, no more

By The Way: In the README.md: pi@raspi1:~/Adafruit-Raspberry-Pi-Python-Code $ cat README.md # Adafruit's Legacy Raspberry Pi Python Code Library ## What happened to all the Raspberry Pi Python code!?

Worked for me: pi@raspi1:~ $ git clone https://github.com/adafruit/Adafruit-Raspberry-Pi-Python-Code Cloning into 'Adafruit-Raspberry-Pi-Python-Code'... remote: Enumerating objects: 657, done. remote:

Hello everyone, I want to turn my telemetry on "volts" and with the procedure "APRS Telemetry Toolkit" in chapter 5.5 Is there a step that is not working for me? "cd~ git clone

Hello, I use direwolf under OpenWebRX and have a question about APRS reporting via aprs-is. In contrast to the previously used software (ui-view32), no digipeaters are reported. As a result, no more

Sounds easy enough, especially if you use the same time criteria. If the script's 75 mile / 30 minute check returns "empty" (nothing heard in the last 30 minutes), delete the file. Why make it more

Thanks again Rob, Yes, that is exactly the path I'm following. I'm thinking I need to add in a routine to delete that file after n minutes (say 60) if no new DX heard.? Shouldn't be too difficult as

Glad you got it working. As for the RF alert, have the DW log parser creating a file in the DW folder "if the 75 mile condition is met". It could be as simple as creating/deleting the file in

Thanks Rob, that worked. I made a very dumb error in such a simple script that didn't help the situation, but rectified now! I also passed a position packet for MM0NBW-2 so it's now on aprs.fi. I've

Yes, very interesting indeed. I look forward to its further development, such as populating the real-time monitor with most recent traffic at the top.