开云体育

I ran the command direwolf -x a This is what I got. Looks like I cannot use USB PnP Sound Device for the audio. ?I will try using the "USB AUDIO CODEC" Tim Dire Wolf version 1.6 Includes optional

Hi Martin, Well, made some progress but the OS doesn’t seem to want me to access the device. (Seems like a typical group permission to a device error, I just don’t know *yet* how to resolve

Hi Martin, Actually, it seems that there was an issue with the make install.. It wasn’t actually copying over the re-built direwolf binary. (No errors produced.) I ran from the src directory

Hi Mark, Sorry, I should have mentioned before - while the changes are still in my fork, you'll need to build from the 'dev' branch and not 'master' to get the Mac CM108 changes. I'm guessing that

Hi Martin! Great to see you here. I just built from your branch and all seems to have built, but I get an error when trying to use a CM108 device.. Reading config file direwolf.conf Config file

Hi Tim, You'll see updated build instructions here, in case you haven't already seen them: https://github.com/mfncooper/direwolf/tree/dev?tab=readme-ov-file#macintosh-macos---using-homebrew The

I learned my Silicon Labs USB driver was out of date. ?I updated it and now it says tty.usbserial. ?I believe that fixed more than one problem. Now to do brew make, brew make install but do I need

First off, let me say I am not certain this will solve "your issue", but it will help determine if the PTT issue is due to the COM port and sound card on a given DIGIRIG match. That was the purpose in

Martin, I will build from your tree with homebrew, and I am running homebrew v 4.4.31 on an M1 Mac Mini. My digirig is showing as tty.usbmodem, not a tty.usbserial. ?I am not sure what version I

On Wed, Apr 16, 2025 at 07:20 PM, Rob Giuliano w Here's what LSUSB says: : ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 009: ID 0d8c:0012 C-Media Electronics, Inc. USB Audio Device Bus

Thanks for that, Jeff.? I feel exonerated ... well, somewhat.

My read of the DIGIRIG Mobile device website ( https://digirig.net/product/digirig-mobile/ ) is that PTT is either CAT or RTS on COM "*? permanently available independently from CAT port an

Hi Steven, PTT CM108 won't work with the Digirig Mobile model, but will with the Digirig Lite and DR-891 models, according to this page: https://digirig.net/choosing-digirig-model/

My bad.? I failed to provide the whole section of the conf file. I've changed the second MYCALL.? I originally had that configured differently, however, I noted in the guide that was optional.? As

I haven't been using CM108 because it doesn't trigger the PTT on either of the xceivers.? Perhaps its the cables I am using (from Digirig).? I've been running for two years with the current PTT

One clarification to Mark's comments: If you build from my fork or apply my PR, you do get the cm108 tool as well. As with Windows and Linux, running the tool will show you which devices are available

As an aside, I re-pulled the source and built direwolf.. Some thoughts : 1. The MacOSX instructions are lacking. Ports is far out of support and Homebrew is the replacement. 2. The Additions that

Hi Tim, Arecord is part of the Alsa toolset and not present on the Mac. Try using ADEVICE "USB Audio Device” "USB Audio Device” For the Digirig, (depending on which one you have) it could be

Hello, I am trying to find the audio codec for Direwolf with a Digirig on my Mac. ?I do not know a command like arecord -l to get the sound cards for ADEVICE? "USB Audio Codec:6"? "USB Audio

In addition to David's comments, I see you only have 1 device configured (the second one), but state you are using 2 different DIGIRIGs. Also, you should use different callsign-ssid for each DIGIRIG