开云体育

Hello again! I had to back burner my APRS project for a few months, but now I’m able to work on it again. Replying to the last message, I used alsamixer to adjust the volume, and stored the

+1 for -q v

I compiled/updated Direwolf on Kubuntu today using "git checkout dev".? Starting Direwolf report 1.8 A which has a reasonable length VOX comment.??Then I starting from a new Raspberry Pi build (New

Thank you David, I did not find anything in the windows logs.? I'm planning on moving to Linux soon and will revisit Direwolf at that point in time. Also a big thank you to everyone else who offered

Not surprising. A lot of networks are restricting outbound access to authorized ports only (such as standard HTTP and HTTPS ports) to prevent malware that sneaks past their security from being able to

Hi everyone, Thanks for all your assistance. Just wanted to post an update here. Turns out the network that I was trying to use was not allowing outgoing connection to whatever port that APRS uses. I

You still don't have the figures correct.? The numbers NEVER use seconds.For LAT it is DD^MM.mmmN???????? where D-degrees, M-Minutes, m-decimal minutes (not seconds), and requires direction

Morning Bob, Thanks for this, I'd looked at the manual but the index only went to p107 (I was looking at it on GITHUB) so hadnt seent that page... I did manage to get it working with a bit of

Morning All, OK, with pointers fron Nigel, and some reading between the lines I've managed to get my feet dry and with 1/2 mile of home..... The problem I was having was that, as Nigel pointed out,

Hi Bob It's on P111 of the Direwolf User Guide and will accept decimal notation as well as your example's. Your example though is in the degree/minute.mmm format but 94 (minutes) exceeds the max of

Morning Nigel, Thanks for the reply.... but I'm still not gellint the requied location.... I changed the PBeacon statement to: PBEACON sendto=igate every=30 overlay=R symbol="igate" lat=55^94

<rover.bob123@...> wrote: They are the degrees of your location, so you are saying that you are located at 42 degrees and about 56 minutes north.Which just happens to be the latitude

Thank you, Bob and all.? I have discovered that the current version? of Direwolf does indeed support PTT on the ICOM USB port. I changed the PTT line to PTT COM8 DTR I changed the USB Send setting

Morning from a cold, wet and windy Scotland.... I've built an iGate with Pi3+ and and Icom RX but I can't get my location on show on aprs.fi properly... I've tried Lat/ Long and UTM. My Pbeacon

Hello KG7ASX, Please review your Windows 11 Event logs around that timeframe of the Direwolf failure and see if there any specific USB or other issues. This still seems like an RFI or cabling issue to

Thank you for the responses. Some encouraging progress! I completed the following steps: 1. I rebooted my machine 2. Changed the performance mode to "best performance" per Jerry's suggestion 3.

Jerry: Did you see this same issue with a Digirig device or just some other USB-based sound device? I've been thinking more about this issue as I hate to give up in defeat but one other possibility is

I had the same issue and I found that an ac line cable in the wall was next to the digirig. I moved it a foot away and been running fine. I can also trigger this by using the audio devices setting in

Yeah.. it sounds like you're doing the right thing here. Hmmm... I don't know what else to say. There is something clearly not right on your computer between the OS, the Digirig, and Direwolf. I know

Responding to David Ranch: - "disconnect the Digirig, go into the Windows Device Manager too and REMOVE the CM108 driver." - I'm not sure I'm doing this correctly.? In Device Manager, under "Sound,