开云体育

Hello Patrick, I also see on the LInuxHams list, you mentioned: -- PTT /dev/ttyUSB1 -DTR RTS then the FSK light comes on and when it transmits it flips from FSK to PTT without a dead key. -- Are

Completely agreed, direwolf+bluetooth is a great combo, extend it to the ax.25 network stack on the pi as well, ?? https://www.youtube.com/watch?v=wXfa9PiDdjU&t=3s cool, -craig KM6LYW

So I have found if I set direwolf to PTT /dev/ttyUSB1 -DTR RTS then the FSK light comes on and when it transmits it flips from FSK to PTT. That I find functional. Now to figure out why nothing else

I'm running Bluetooth to a Pi 2 Zero W with Direwolf as KJ4OVQ-9.? I connect to it from my APRSISMO/TestHost Android application when I'm in the vehicle to become a mobile IGate.? It only does SPP

It's definitely got to be a application issue. I have a serial adapter on order as I can't find the one I have that shows via LED the signals going over the wire so that will have to wait but if I

Hello Patrick, On you original post to the [email protected] list, you posted: "RTS DTR -> FSK & PTT flash on for a moment then turn off" Do you have any idea what you changed since that

So it's keying but not decoding on the other end, I assume FSK is likely the issue but I really don't know. It keys, it sends but my other station doesn't decode it. It's currently going into a

Doh! Missed that message, ya beat me to it.

Think this will help....? https://github.com/wb2osz/direwolf/blob/master/doc/Bluetooth-KISS-TNC.pdf

Well dad gum, I could have SWORE for the life of me I tried that I swapped RTS and DTR back and fourth and they both worked though it is triggering FKS and PTT at the same time it is working and I've

Looks straightforward. https://github.com/wb2osz/direwolf/blob/master/doc/Bluetooth-KISS-TNC.pdf Sent from my iPhone 13 Pro Max

Anyone add Bluetooth support? I have a RPi02W with Fe-Pi audio board and even though have a Moblink TNC3 was thinking about getting a second TNC3, but then thought why not just add

I had a similar problem when using a USB to serial adapter and an EasyDigi board. Both the RTS and DTR pins are wired to the EasyDigi - presumably so that either one can be selected for PTT by the

Understood, but toggling the switch should only switch the PTT method whether that by PTT or FSK in accordance to the signal it receives, be that RTS or DTR, but I digress, if my buddy and I have no

Hello Patrick, It's a pretty remote possibility that this is a code bug since 1000s of people are successfully using Direwolf. The unique thing here is that you're using the Yaesu SCU-17 device

Hopefully I haven't baffled or stumped everyone. Granted I'm a bit stumped as to why it's not working. Is it possible it's a application bug and if so what do I need to do to request it be fixed?

Nope, I have FLRig and FLDigi configured to use my 857 by default. FLRig is pointed to /dev/serial/by-id/usb-Silicon_Labs_CP2105_Dual_USB_to_UART_Bridge_Controller_00AC0110-if00-port0 Firewolf

What about Flrig? Are you using that with Fldigi? If so, Flrig is the program that is owning the serial port, not Fldigi, so it is what has to be shut down before starting DireWolf. Andrew,

Great question to be sure I'm not pointing two applications to the same device :) A easy mistake to make for sure, but no. I opened FLDigi and ran it without direwolf running to see if it would key

I'll ask the obvious question:?? You aren't trying to use /dev/ttyUSB1 when both FLDigi and Direwolf are running??? Being more specific, you are sure FLDigi is 'dropping' its connection to