开云体育

What needs to be done to interface Direwolf with some other program? Brian KE6IYC

That depends on the program. The configuration file can be set up several ways. The method I am familiar with makes Direwolf look like a KISS TNC. 73 DE Charles, N5PVL

Hi all, By way of introduction, I've been using Direwolf (version 1.0) for a number of months and now have a Rx-only HF Igate (VK1IAN-1) operating on an Odroid U3 ARM device. As this is a quad core

How is that done? Brian KE6IYC

Brian, Are you familiar with the guidance in section 4.4.1 (for serial port) and 4.5.1 (for network) of the User Guide (version 1.0, released May 2014)? If not, get the document from the link

Hi. Just joined this group, looking to put together a portable/mobile HF APRS system. I'll use YAAC as the APRS client, but that's not for here (unless someone has already done it all on Lubuntu and

Hi Dave, Running multiple modems is a clever way to counter frequency drift. When I first started playing with DW, it was on an old laptop and I was running five modems. My current setup uses an

I'm doing OK on the audio end with my XP netbook, but DW will not work properly with my USB-Com port dongle. No matter what setup options I use, it just hangs up with PTT enabled. I've tried: PTT

Sounds like RF is getting into the dongle. Brian KE6IYC

Agree. I had this (ages ago) using a RigExpert. Applications crashing without notice was also experienced (unusual for a Linux box). After liberal "choking" (many turns around iron toroids rescued

Sadly it does makes one wonder about the EMC state of some accessories that are intended by definition to be used in a less than friendly RF environment. Not just RigExperts either, but many after

> Re: IntroductionThu Jul 31, 2014 8:52 am (PDT) . Posted by:"Ian > Bennett" benny226518Hi Dave, Running multiple modems is a clever way > to counter frequency drift. When I first started playing with

I checked that by reducing power to zero, and still have the problem. What led me to try reducing the power was the fact that there are no problems with two other programs, FLDIGI and MixW. If RF

Hi All. OK, been using DW for a little while, comparing it with other tools etc, on both Windows and Linux.. However, DW has just ceased to funciton on any Windows system I have (Win 7 32 or 64

I never got it to work in my Windows machine in the first place. 73 DE Charles, N5PVL

"John Langner WB2OSZ" wrote. Hi John.. Much as in the original posting. (Please re-read ALL of my original post..) It starts up, with no errors, and just sit's there consuming 24% of CPU, but

Short version of long story. I'm building a dual band APRS mobile setup, 2m and 30m. The "main" software is YAAC on Lubuntu. On 2m, I'm using a venerable Kenwood TH-D7e, on HF, Direwolf feeding an

Using all of the COM port selections possible with DireWolf, all I've ever been able to get is a "stuck in transmit" condition. The program will be unusable for me until this problem is sorted

Hello Dave, This already exists. In the output of direwolf if you log it shows things like: Digipeater WIDE1 audio level = 66 [NONE] [0]

Dave, I'm using Direwolf as a Rx-only Igate on 30m on an Odroid3, but there are also instructions for the RPi. As my setup is Rx-only, I haven't transmitted using it but I will relate some of my