开云体育

Hello N3LYS, Stepping back a bit.. can you give us more details on your goals: - When you say RF, are you talking about FM over VHF? Maybe SSB over HF? The transport details really matters here - What

Direwolf: 1.5 The soundcard in the 991a. Hamlib looks like 4.2 The radio isn't keying. It is set to RTS in fldigi and wsjtx, both key the 991a.. I'm not sure how that is set in Direwolf.

I'll take your questions in reverse order: - Are there toy examples where Direwolf reads a text file and plays the encoded audio, or picks sound from a microphone and prints the decoded text? By

Dear folks, I'm a newcomer. I want to transmit bytes between computers via RF, and my plan is: 1. Encode bytes into audio. 2. The transmitter modulates the audio into RF. 3. The receiver demodulates

Hello Rick, A few beginning questions: - What version of Direwolf? - What sound card are you using? - How are you trying to key your radio: - VOX ? - CAT command? If so, what version of Hamlib do you

I have an FT-991a. I'd like to be able use the ISS packet repeater. I have the channel programmed. The radio will key transmit with mic PTT. I am using OpenSuse 15.1 Linux. Direwolf will NOT key the

Dave, You are a legend and have saved me time trying this myself. For the developers, it would be handy to have a "SEND ALL" or "SEND LAST" option for these saved frames. For my application (APRS

For all who's interested, or as reference: After implementing my circuitry for a PTT interlocking and DCD sharing solution combined with Direwolf, I can confirm Direwolf holds the frames in queue when

Yes that is the feature: Power Control.. If the station is transmitting weather, the radio does not need to be powered on most of the time. However, with a bit more functionality, it could be powered

Hi Robert, If Direwolf is running and occasionally sending a packet, shouldn’t it be the one to turn the radio on and off? The Tracker2/3 could turn on a radio, send a packet, turn off the radio.

You are request the same feature as the Power Control feature. As If I am reading the Argent Data manual, the feature needs to:?? a) Activate a GPIO Power Control pin (to power up the radio)?? ?

Fred,What are you running Direwolf on? If it's a pi, you could use the GPIO and a relay to handle the radio power.??Probably could be done with about any system.? Rob GiulianoKB8RCO On Thu, Jul 15,

Greetings, I am looking to power up a radio, send a packet, shutdown radio. I had this function on the ArgentData trackers. I am not seeing a reference to this option in the documentation but then I

No need to use ALC input, better not actually... Having a good solution, preferably in software, with PTT interlock and DCD sharing across some channels will do the job. No need to involve any ALC

How about using the ALC input ?

Hi all, I'm about to implement and test with the TRANSMIT INHIBIT INPUT too for some special purpose. For success it's imported it queues the frames and TX-es them when the TXINH input is released.

That looks very nice Craig and some of your other projects on Github look pretty interesting as well! Thanks for posting those. --David KI6ZHD

I have used Direwolf on Pis and never seen this message with GPIO, or VOX. Since this was a slightly different installation of my client, I looked through my APRS client to see if there were any

Audacity and or AlsaMixer are relative readings, similar to an uncalibrated S-meter.You can read the manuals and know what the radio is outputting - especially when using the radio's data jack.? They

if anyone is interested, https://www.youtube.com/watch?v=NJ_IJNU7NA0&t=7s https://github.com/craigerl/direwatch