¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

MT-4 rack, turning UHF link off remotely


 

I am trying to find a way to turn off a UHF link remotely using DTMF tones.
This would be in a rack containing MT-4E drop (RX, TX) and link (RX, TX) modules.
The audio control card would be either a CI-RC-4L or CI-RC-4M module.
After reading the manuals, I can't see a direct way to do it, so it would have to be
a work around.
Any suggestions would be much appreciated.
tnx
Mike VE7SML


 

¿ªÔÆÌåÓý

Mike I believe that in the CI-RC-4M receiver/Transmitter Links tab click on the desired link box ie RXa-TXb box then select link type DTMF Controlled Link. Enter the 4 digit enable and disable codes you want to use. Select if you want the link on start up or not. And select the DTMF timer settings. You could also use conditional link setting to use PL to turn the link on and off too. There are also 4 GPO pins as well to turn stuff on and off.?

Hope that helps.?

Jim.?

On Jul 7, 2024, at 7:22?AM, Michal Smialowski VE7SML <mooksmd@...> wrote:

?I am trying to find a way to turn off a UHF link remotely using DTMF tones.
This would be in a rack containing MT-4E drop (RX, TX) and link (RX, TX) modules.
The audio control card would be either a CI-RC-4L or CI-RC-4M module.
After reading the manuals, I can't see a direct way to do it, so it would have to be
a work around.
Any suggestions would be much appreciated.
tnx
Mike VE7SML


 

Thanks Jim, didn't see that option. Looks easy peasy :)
tnx
Mike