Local Mesh Usage > Hostname - Repeater
|
Hi:
This setup for a D-Rats repeater working within AREDN mesh.? IP seems to connect under Preferences > Radio BUT If I try a non TLD domain like COA, Distribution without (.com, .org or regular extensions) connection is not possible.? Any work-around or idea for this specific use?? ?I have already setup and working (within AREDN local mesh) Linux applications like MatterMost, TeamTalk using a single word hostname (no extension). Will appreciate any tip! 73' Edfel KP4AJ |
|
Hi Again: Please ignore.? Sorry, it's working.? Seems good.? ?Stiff have to test outside the home network.?? 73' Edfel KP4AJ On Sun, Sep 4, 2022 at 6:15 PM Edfel Rivera via <edfeljose=[email protected]> wrote: Hi: |
|
Hi Troy:
Will post as soon as I can verify connections from outside my home network are possible.? Waiting for some fellow Ham Operator within the AREDN Mesh in Puerto Rico.? But I can advance the following: 1-? You need a working AREDN Mesh node? 2-? You need a D-Rats repeater running and connected to the same Netgear (or equivalent) switch where AREDN node is connected.?? 3-? I installed HAMPI 2.0 on raspberry pi4 -- from there is the D-Rats repeater running. 4-? Although obvious but worth stating > Hostname at raspberry pi must be the same as you define in Preferences Radio Network.? You just put the name (No internet TLD required) also you can use the IP of the raspberry pi or machine running D-Rats repeater.? 5-? To start the D-Rats repeater you use the command $ python d-rats_repeater -C I am new to D-Rats, so learning.? Will try to keep posted.?? 73' Edfel KP4AJ |
Edfel Rivera
Troy - K4JDA