Hi, I'm a brand new user trying to get setup for the first time.? I want to connect the Soundmodem TNC to DRATS.? I've tried sending chat messages using both AGWPE and KISS ports but it isn't transmitting.? DRATS show that it's connected in the event log.? I'm running win 10 and the x64 version, I replaced the lzhuf_1.exe file like instructed on the website.? Dones anyone have any ideas of things to try to fix this issue.?

BTW it's not a radio issue because I don't have a radio connected.? I have soundmodem output set to my computer's speakers for easy troubleshooting.? I just want to make sure I get audio output from the TNC.? I did a two tone test in Soundmodem so I know that program is working

开云体育

Hello Greg,

BTW it's not a radio issue because I don't have a radio connected.? I have soundmodem output set to my computer's speakers for easy troubleshooting.? I just want to make sure I get audio output from the TNC.

I would recommend to get what I assume is UZ7HO's soundmodem working first and then worry about D-Rats.? Are you sure that soundmodem is asserting the PTT signal but maybe the output volume is too low or muted??
Maybe try using UZ7HO's EasyTerm ( ) which also uses the AGW interface to try making some connections to confirm everything it working there first.

--David
KI6ZHD

I found the issue, I was trying to connect to the TNC using the 127.0.0.1 network address but the program wanted me to configure as an AGWPE connection.? I have it working now.??

I tried connecting to VARA FM & HF KISS as well.? The log shows it connected but VARA won't transmit because it says invalid KISS command.? I would love for this to work but VARA developer would have to do some work, probably not going to happen.? I'm going to shelf this aspect.

I also tried connecting to FLDIGI KISS.? The log shows it's connected but it doesn't transmit.? I'll keep playing around with this, hopefully it can work.??