开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. D-Rats
  2. Topics

I can only see my own station on the maps

 

Thanks to those working one the D-Rats software.? It's becoming useful again!? Much appreciation.

I got the new Thunderforest maps working.? Looking great.? But I do not see other stations plotted onto the map.? Only myself.? Under the map is a place where I believe it should list all of the other stations that are known to D-Rats, but I only see my own station.? I have looked around to find any setting that may cause this, can't find anything.??

Any suggestions?

Randy-W4LKS
 

开云体育

There should be a plus sign to the left of ur call click to see other stations!!

Ralph?Barbakoff (WA9LKZ)

On May 20, 2020, at 11:28 AM, Randy-W4LKS <w4lks@...> wrote:

Thanks to those working one the D-Rats software.? It's becoming useful again!? Much appreciation.

I got the new Thunderforest maps working.? Looking great.? But I do not see other stations plotted onto the map.? Only myself.? Under the map is a place where I believe it should list all of the other stations that are known to D-Rats, but I only see my own station.? I have looked around to find any setting that may cause this, can't find anything.??

Any suggestions?

Randy-W4LKS

 

开云体育

That would be too easy.? I have clicked the plus sign...turned on all stations...expanded the tree...I am the only station listed.? Even though I see lots of other stations listed on the main screen.

Randy

On 5/20/2020 9:47, Ralph Barbakoff wrote:
There should be a plus sign to the left of ur call click to see other stations!!

Ralph?Barbakoff (WA9LKZ)

On May 20, 2020, at 11:28 AM, Randy-W4LKS <w4lks@...> wrote:

Thanks to those working one the D-Rats software.? It's becoming useful again!? Much appreciation.

I got the new Thunderforest maps working.? Looking great.? But I do not see other stations plotted onto the map.? Only myself.? Under the map is a place where I believe it should list all of the other stations that are known to D-Rats, but I only see my own station.? I have looked around to find any setting that may cause this, can't find anything.??

Any suggestions?

Randy-W4LKS 
-- 
Randall C. Wilkinson, P.E.
hvacware PLLC
Spokane, WA
 

What RATflectors do you have configured?

If you only have the RAT (main) nothing at all, configure others
 

Well, now on the k3pdr Ratflector I suppose you will see the other stations on the map ...?I do see you
 

开云体育

Yes...I saw you too Luis.? It seems that the K3DPR reflector does show the positions when I "Request All Positions" in the stations list.? When I do that for the RAT (Main) ratflector, I get none.

Also, I notice many stations listed in the stations list, still do not show up on the map after I perform a Request All Positions.? Could it be that all of those stations that do not show up have not entered their Lat/Long information?? If so, a lot of users do not do it.

OK...Thanks, at least I now know that it depends on the ratflector...and RAT gives none.? I need to go check the WA7DRE ratflector (which I operate) to make sure it is configured to share the positions of connected stations.

Put your Lat/Long position into your D-Rates settings OM's!

Randy Wilkinson, W4LKS
Washington Digital Radio Enthusiasts
Spokane, WA
On 5/20/2020 11:16, Luis ea1axy wrote:

Well, now on the k3pdr Ratflector I suppose you will see the other stations on the map ...?I do see you

 

开云体育

Hi Randy

?

To my knowledge the request “all positions” works under 2 conditions:

?

- stations shall be connected via radio or a ratflector different from the standard RAT as that has some issue in forwarding positions when requested (I don’t know why, maybe it’s an older version or has some local config?)

?

- the drats version of the remote station shall be equal or greater than 0.3.6 – older versions have a bug and do not reply with the position but only with a short acknowledge message

?

When developing the fix to reply position I was executing locally a ratflector (it’s code remained pretty much unchanged since v0.3.3 ) and it that was forwarding the positions correctly without the need of any particular config.

?

Ciao

maurizio

?

?

?

?

From: [email protected] <[email protected]> On Behalf Of Randy-W4LKS
Sent: mercoledì 20 maggio 2020 20:32
To: [email protected]
Subject: Re: [d-rats] I can only see my own station on the maps

?

Yes...I saw you too Luis.? It seems that the K3DPR reflector does show the positions when I "Request All Positions" in the stations list.? When I do that for the RAT (Main) ratflector, I get none.

Also, I notice many stations listed in the stations list, still do not show up on the map after I perform a Request All Positions.? Could it be that all of those stations that do not show up have not entered their Lat/Long information?? If so, a lot of users do not do it.

OK...Thanks, at least I now know that it depends on the ratflector...and RAT gives none.? I need to go check the WA7DRE ratflector (which I operate) to make sure it is configured to share the positions of connected stations.

Put your Lat/Long position into your D-Rates settings OM's!

Randy Wilkinson, W4LKS
Washington Digital Radio Enthusiasts
Spokane, WA

On 5/20/2020 11:16, Luis ea1axy wrote:

Well, now on the k3pdr Ratflector I suppose you will see the other stations on the map ...?I do see you

 

Maurizio, thank you so much for continuing to develop the D-Rats application. It's actually an excellent application and when I discovered it I was soon excited by other colleagues from our local club to install and configure it...
But we came across an error that somewhat limits the use of the application - the display of your stations on the Map!
?
Conditions:
I'm using the D-Rats Repeater currently connected only to 2 other repeaters on the Internet network.
However I did tests without the local repeater, connecting D-Rats directly to both providers of the Internet network and the symptoms are the same!
My system is linux buster over Raspberry pi 4; d-rats 0.3.10 beta 3 and Python 2.7.16, GTK 2.24.32, PyGTK 2.24.0, LibXML using 0.5 KB
?
1. when "Request position/Request all positions" is done, nothing appears in the "Event Log" tab and the Map only shows the position of my callsign, however in the ??esrepeater log doing "tail -f repeater.log" with you see that stations that are online report their positions, they are just not interpreted by D-Rats and, as a consequence, nothing appears on the Map!
?
Here is the excerpt from repeater.log attached
?
?
2. I leave here a small suggestion for improvement, if it were possible to implement - sending files in QSTs
?
On my packet radio system I send APRS beacons 10 minutes before the satellite AOS on my locator.
The event generates a small text file with only 1 line. This file is read for example by BPQ every minute and sent to the network.
With D-Rats I couldn't do the same, because when this file doesn't exist D-Rats gives an error!
Will it be possible to make this small change so that if there is no file configured in QST, D-Rats will ignore it and continue counting the time without giving an error?
?
Thank you very much Maurizio
73 of Ricardo in Cascais, PT
CT1EBQ

repeater.log
repeater.log

 

Saludos Ricardo, te contesto en "castellano" que supongo entenderás, por lo menos algo ...?

Al "problema" de cuando haces un request positions es SABER cuantos de los corresponsales hayan configurado correctamente su envío a petición o su propio envío por parte del programa. Por ejemplo tu mismo no lo haces, ni envías, ni a petición tu equipo responde. Es posible que tengas configurado el "modo" GPS en vez del GPS-A ?

De lo segundo ni idea, nunca usé el BPQ pero como habrás podido comprobar estamos 3 estaciones enviando información meteorológica en formato DPRS Weather data para que los equipos Icom que pueden ver esta información la vean, como puedes comprobar por las capturas de pantalla hay otras formas de verla ... para entender lo que yo tengo configurado echa un vistazo a mi Blog en??...?

También es cierto que yo por lo menos uso una versión modificada de la versión 0.3.9 modificada y por ahora NO pública.

A tu disposición en el DCS018D o a petición, me avisas y me conecto al XLX268E a través del repe local CQ0DCH C

um abra?o do outro lado da raia, os Trás os Montes espanhois, dicen ... hi hi hi?
 

Hola Luis, si por mi es preferible el castella?o, además por que tengo una costilla de Galicia :-) Pero, por la gente aqui mejor en inglês más conmumente utilizado y así tenemos quizá más respuestas...
?
Ya lo percebi, esto és una questión de versiones. En versiones anteriores algunas funcionalidades suelen funcionar otras no. Aqui igual...
Voy testar mejor y a dejar los bugs que encontré en la pagina de issues del proyecto.
?
En el pasado escriby algunos programas en python pero el codigo tiene muy pocos comentarios para entenderlo! Hay que perder mucho tiempo haciendo enge?aria inversa...
?
Te dejé unos mensajes por d-rats, pero quizá no te an llegado. Perdona los errores...
Un abrazo Luis y muchas gracias por haberes contestado hombre!
Haber si nos encontramos por ahí en otras frequencias...

de Ricardo Oitavén, CT!EBQ

1 - 10 of 10