How to setup and start D-Rats repeater raspberry

Edfel Rivera All Messages By This Member #2368 Hi All: New to D-Rats here. I installed a HAMPI 3.01 image into a raspberry PI 4. I have setup the D-rats client into Windows 10 no problem so far. My main interest is to run a Repeater from Raspberry Pi 4.? But I am lost how to start the repeater.? Have some question: 1-? Repeater and client have to be running at same time. I mean at the pi4. 2-? Which files are specific for repeater configuration My interest is to setup D-Rats to work within ARDEN mesh mostly EMCOMM.? ?? Any other tip will be highly appreciated.? I run Ubuntu and have some experience with raspberry.?? 73' Edfel KP4AJ
Edfel Rivera All Messages By This Member #2369 Hi: Just want to share I have tried both? raspberry pi 3b and raspberry 4b.? Also tried various versions of HAMPI.? Last one tested 1.1 but netstat -lptn shows no listening.? I am sure there must be a config issue. Unfortunately no much information on the Internet about how to setup?D-Rats repeater (linus or raspberry).? Any link or pointer will be highly?appreciated.? Will keep looking.? 73' Edfel KP4AJ toggle quoted message Show quoted text On Sun, Sep 4, 2022 at 9:26 AM Edfel Rivera via <edfeljose=[email protected]> wrote: Hi All: New to D-Rats here. I installed a HAMPI 3.01 image into a raspberry PI 4. I have setup the D-rats client into Windows 10 no problem so far. My main interest is to run a Repeater from Raspberry Pi 4.? But I am lost how to start the repeater.? Have some question: 1-? Repeater and client have to be running at same time. I mean at the pi4. 2-? Which files are specific for repeater configuration My interest is to setup D-Rats to work within ARDEN mesh mostly EMCOMM.? ?? Any other tip will be highly appreciated.? I run Ubuntu and have some experience with raspberry.?? 73' Edfel KP4AJ
Edfel Rivera All Messages By This Member #2370 Hi Again: Bingo!!? Well now listening 9000 and was able to connect from another machine (Windows).? The proper way to invoke was: python d-rats_repeater.py -C Anyway, will appreciate reference to repeater info and commands.?? 73' Edfel KP4AJ toggle quoted message Show quoted text On Sun, Sep 4, 2022 at 9:26 AM Edfel Rivera via <edfeljose=[email protected]> wrote: Hi All: New to D-Rats here. I installed a HAMPI 3.01 image into a raspberry PI 4. I have setup the D-rats client into Windows 10 no problem so far. My main interest is to run a Repeater from Raspberry Pi 4.? But I am lost how to start the repeater.? Have some question: 1-? Repeater and client have to be running at same time. I mean at the pi4. 2-? Which files are specific for repeater configuration My interest is to setup D-Rats to work within ARDEN mesh mostly EMCOMM.? ?? Any other tip will be highly appreciated.? I run Ubuntu and have some experience with raspberry.?? 73' Edfel KP4AJ
KC5SAM Virginia Member Profile All Messages By This Member #2372 go to 58B on Tuesday evenings and the "after net" should be able to help you.? I have my Raspberry Pi 3B working for d-rats but not setting up the things you need to know. I am guessing you are on eastern time and that net would be Alabama D-Star Net?@ 9:30 Eastern time? with the After Net following it. It is a collaborative net and they can handle almost anything.? Good Luck! de KC5"SAM" toggle quoted message Show quoted text On Sun, Sep 4, 2022 at 9:26 AM Edfel Rivera <edfeljose@...> wrote: Hi All: New to D-Rats here. I installed a HAMPI 3.01 image into a raspberry PI 4. I have setup the D-rats client into Windows 10 no problem so far. My main interest is to run a Repeater from Raspberry Pi 4.? But I am lost how to start the repeater.? Have some question: 1-? Repeater and client have to be running at same time. I mean at the pi4. 2-? Which files are specific for repeater configuration My interest is to setup D-Rats to work within ARDEN mesh mostly EMCOMM.? ?? Any other tip will be highly appreciated.? I run Ubuntu and have some experience with raspberry.?? 73' Edfel KP4AJ
Edfel Rivera All Messages By This Member #2373 Thank you Virginia! 73' Edfel KP4AJ toggle quoted message Show quoted text On Sun, Sep 4, 2022 at 6:15 PM KC5SAM Virginia <kc5sam.vo@...> wrote: go to 58B on Tuesday evenings and the "after net" should be able to help you.? I have my Raspberry Pi 3B working for d-rats but not setting up the things you need to know. I am guessing you are on eastern time and that net would be Alabama D-Star Net?@ 9:30 Eastern time? with the After Net following it. It is a collaborative net and they can handle almost anything.? Good Luck! de KC5"SAM" On Sun, Sep 4, 2022 at 9:26 AM Edfel Rivera <edfeljose@...> wrote: Hi All: New to D-Rats here. I installed a HAMPI 3.01 image into a raspberry PI 4. I have setup the D-rats client into Windows 10 no problem so far. My main interest is to run a Repeater from Raspberry Pi 4.? But I am lost how to start the repeater.? Have some question: 1-? Repeater and client have to be running at same time. I mean at the pi4. 2-? Which files are specific for repeater configuration My interest is to setup D-Rats to work within ARDEN mesh mostly EMCOMM.? ?? Any other tip will be highly appreciated.? I run Ubuntu and have some experience with raspberry.?? 73' Edfel KP4AJ

Previous Topic Next Topic

开云体育

How to setup and start D-Rats repeater raspberry