Not sure how to do this.
Thanks anyway.
Jim
|
Jim,
I had something like this. It turned out to be a corrupt message. Try going into your Windows file directory C:/users/yournamehere/Appdata/Roaming/DRats/Messages
and delete everything but the .DB file (one .DB file in outbox, inbox, etc.).?
Worked for me.
Good luck.
Mike Mandell, KC3BLF?
|
I have seen this happen before. In my case, I put a comma in the name of a radio connection (e.g. Austin, TX) and the config file interpreted that as an invalid field being added and then nothing worked. If you can remember what you did before it stopped working, you could manually edit the config file and remove whatever you did. Failing that, just delete the config file and D-RATS will prompt enter your callsign, just as if it was a new installation.
Patrick (N3TSZ)
On Tuesday, July 7, 2020, 07:03:22 PM EDT, Jim McCloskey <jmccloskey@...> wrote:
Patrick, I cannot even get into it now. Everytime I click file? ? perferences? just the error message comes up.
Jim
|
HI!
if you want to check your logs this maybe could be of help
?
?
Il giorno mer 8 lug 2020 alle ore 01:03 Jim McCloskey < Jmccloskey@...> ha scritto: Patrick, I cannot even get into it now. Everytime I click file? ? perferences? just the error message comes up.
Jim
|
Patrick, I cannot even get into it now. Everytime I click file? ? perferences? just the error message comes up.
Jim
|
Hey Jim, It sounds like you enabled the spell checker in preferences, but you do not have the spell checker installed on your computer. Search the internet for instructions to install Aspell in windows. (Or just un check the box).
Patrick (N3TSZ)
On Monday, July 6, 2020, 06:15:37 PM EDT, Jim McCloskey <jmccloskey@...> wrote:
I just started having trouble when I click on the preferences tab. I get the error message and debug box.? I've copied the bottom of the error log. \ Any help appreciated.? see below
Demand-opening aspell...
Spelling test failed: [Error 2] The system cannot find the file specified
---- GUI Exception ----
Traceback (most recent call last):
?
?
? File "d_rats\mainwindow.pyo", line 138, in do_prefs
?
?
? File "d_rats\config.pyo", line 1881, in show
?
?
? File "d_rats\config.pyo", line 1833, in __init__
?
?
? File "d_rats\config.pyo", line 1803, in build_ui
?
?
? File "d_rats\config.pyo", line 1777, in add_panel
?
?
? File "d_rats\config.pyo", line 1148, in __init__
?
?
? File "d_rats\config.pyo", line 681, in add_list
?
|
I just started having trouble when I click on the preferences tab. I get the error message and debug box.? I've copied the bottom of the error log. \ Any help appreciated.? see below
Demand-opening aspell...
Spelling test failed: [Error 2] The system cannot find the file specified
---- GUI Exception ----
Traceback (most recent call last):
?
?
? File "d_rats\mainwindow.pyo", line 138, in do_prefs
?
?
? File "d_rats\config.pyo", line 1881, in show
?
?
? File "d_rats\config.pyo", line 1833, in __init__
?
?
? File "d_rats\config.pyo", line 1803, in build_ui
?
?
? File "d_rats\config.pyo", line 1777, in add_panel
?
?
? File "d_rats\config.pyo", line 1148, in __init__
?
?
? File "d_rats\config.pyo", line 681, in add_list
?
|
As Goofy would say, Aw shucks Yup, hyuk hyuk!
Thanks for the assist!
--
AL M
KF5SMH
|
I just installed gedit on my Linux machine running Lubuntu 18.04. I can now view the debug log.
Patrick (N3TSZ)
On Thursday, July 2, 2020, 10:36:30 AM EDT, ad5rb <ad5rb@...> wrote:
OK, I just started up a RaspPI and a D-RATS v0.3.3 that I configured maybe six months ago and indeed it crashes as you describe when trying Help>Show debug log.? The problem with mine is that it is trying to show the debug file using gedit, but gedit isn't installed.? The cure was to install gedit.? Another approach is to use a different editor to look at the file:? /home/pi/.d-rats/debug.log
I still need to try with this with the latest distribution version.
73,? Richard Browning? AD5RB
|
OK, I just started up a RaspPI and a D-RATS v0.3.3 that I configured maybe six months ago and indeed it crashes as you describe when trying Help>Show debug log. The problem with mine is that it is trying to show the debug file using gedit, but gedit isn't installed. The cure was to install gedit. Another approach is to use a different editor to look at the file: /home/pi/.d-rats/debug.log
I still need to try with this with the latest distribution version.
73, Richard Browning AD5RB
|
Richard, Thanks to all for your replies, I am able to access the log files I want in both win7 and win10. In both of those cases all I need do is click on help>show debug log, or View>log on the toolbar. In the Linux app I am not able to do the same without D-RATS crashing. I am not sure either of these files will help me ID what is occurring with a friends D-RATS instance but it is a place to start. I have since satisfied myself with the black screen issue being caused by the "berkley time share'. That is a mere left click to bring the screen back and continue with the chat, unhandy at times perhaps but nothing one cannot adapt to.
Once again Thanks to all those who have replied thus far.
--
AL M
KF5SMH
|
HI Al -- I have a ratflector running on a linux AWS instance just for tinkering and access it from D-RATS running on Windows 10. The log files generated by D-RATS on Windows 10 show up in AppData\Roaming and I can look at them by copying the files to another directory and then opening the copies in a text editor. I have not been able to find any log files in the ratflector system though. Maybe I am not looking in the right place.
Richard Browning AD5RB
|
Don I have the San Juan County Rat running on an RPI 4 from my house, it also has D-RATS running as NM5Sj. I am trying to access that set of logs. Hope that clears it up.
--
AL M
KF5SMH
|
Al,
Just to be clear, how are you accessing the D-Rats running?as a ratflector?
Don
Good Morning all!
I am running d-rats 0.3.9.3 for a ratflector on a Pi4 4gb, I have tried to get into my debug log and the main log with no success. If I click on either one of them I get the d-rats has encountered an error splash screen and when I click ignore all my d-rats just shuts down. I am trying to use the logs for troubleshooting some other d-rats issues and could use a little help here.
--
AL M
KF5SMH
-- 73 de N4VIP, Don - SFARES Inc. Treasurer and Secretary
|
Sorry, I haven’t a clue.
Gary
NY5S
?
Sent from for Windows 10
?
toggle quoted message
Show quoted text
From: Al Massaro
Sent: Wednesday, July 1, 2020 10:17 AM
To: [email protected]
Subject: [d-rats] Log access issues
?
Good Morning all!
I am running d-rats 0.3.9.3 for a ratflector on a Pi4 4gb, I have tried to get into my debug log and the main log with no success. If I click on either one of them I get the d-rats has encountered an error splash screen and when I click ignore all my d-rats
just shuts down. I am trying to use the logs for troubleshooting some other d-rats issues and could use a little help here.
--
AL M
KF5SMH
|
Good Morning all!
I am running d-rats 0.3.9.3 for a ratflector on a Pi4 4gb, I have tried to get into my debug log and the main log with no success. If I click on either one of them I get the d-rats has encountered an error splash screen and when I click ignore all my d-rats just shuts down. I am trying to use the logs for troubleshooting some other d-rats issues and could use a little help here.
--
AL M
KF5SMH
|
Re: How to debug a d-rats coredump
Hi all ? If can be of help to debug this, D-Rats can be invoked with “cprofiling” option (as well as other options to force a reconfig or a safe mode start) ? ? have a nice weekend maurizio ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of David Ranch
Sent: giovedì 11 giugno 2020 17:15
To: [email protected]
Subject: [d-rats] How to debug a d-rats coredump? Hello Everyone,
I've been successfully playing around with D-RATS v0.3.9 beta 3 on Centos 6.10 and I left the program running over night and found it crashed. The last thing I see on the terminal screen is:
--
Chat????? : Got chat frame: DDT2+: 0:1:5 DL0NOT-H->CQCQCQ (2QRA DL0NOT WinMor/ALE Station - QTH Karben JO40jf QRV]...[55])??? ?
Sessionmgr: Received block 0:5 for session `chat'???????????????????????????????????????????????????????????????????????????? ?
Transport : Got a block: DDT2+: 0:1:5 ED2YAV->CQCQCQ (2Online (D-RATS)...[16])??????????????????????????????????????????????? ?
Chat????? : Got chat frame: DDT2+: 0:1:5 ED2YAV->CQCQCQ (2Online (D-RATS)...[16])???????????????????????????????????????????? ?
Sessionmgr: Received block 0:5 for session `chat'???????????????????????????????????????????????????????????????????????????? ?
Transport : Got a block: DDT2+: 0:1:5 KS2ARR-C->CQCQCQ (1Online (D-RATS)...[16])????????????????????????????????????????????? ?
Segmentation fault (core dumped)?
--
Here are the various versions of the program's dependencies installed on this machine:
?? python-2.6.6-68.el6_10.x86_64
?? pygtk2-2.24.0-1.el6.x86_64
?? python-six-1.9.0-2.el6.noarch
?? libxml2-python-2.7.6-21.el6_8.1.x86_64
?? pygtk2-libglade-2.24.0-1.el6.x86_64
?? libglade2-2.6.4-3.1.el6.x86_64
?? python-serial-2.4-6.1.noarch
?? libxslt-1.1.26-2.el6_3.1.x86_64
I tried to run "gdb -c core.24111 d-rats.py" but nothing useful came from the backtrace:
--
Core was generated by `/usr/bin/python ./d-rats.py'.??????????????????????????????????????????????????????????????????????????
Program terminated with signal 11, Segmentation fault.????????????????????????????????????????????????????????????????????????
#0? 0x0000003da8c44c50 in ?? ()???????????????????????????????????????????????????????????????????????????????????????????????
(gdb) bt??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????
#0? 0x0000003da8c44c50 in ?? ()???????????????????????????????????????????????????????????????????????????????????????????????
#1? 0x000000000247d330 in ?? ()???????????????????????????????????????????????????????????????????????????????????????????????
#2? 0x00000033b16270eb in ?? ()???????????????????????????????????????????????????????????????????????????????????????????????
#3? 0x0000000001bbf990 in ?? ()???????????????????????????????????????????????????????????????????????????????????????????????
#4? 0x00000033b16275fe in ?? ()???????????????????????????????????????????????????????????????????????????????????????????????
#5? 0x000000000247d390 in ?? ()???????????????????????????????????????????????????????????????????????????????????????????????
#6? 0x0000000002430a20 in ?? ()???????????????????????????????????????????????????????????????????????????????????????????????
#7? 0x00000000021dce20 in ?? ()???????????????????????????????????????????????????????????????????????????????????????????????
#8? 0x000000000247d390 in ?? ()???????????????????????????????????????????????????????????????????????????????????????????????
#9? 0x0000000000000000 in ?? ()???????????????????????????????????????????????????????????????????????????????????????????????
(gdb) quit
--
Any recommendations how to provide some useful information here to figure out what happened?
--David
KI6ZHD
|
Re: recent drats.exe file possible virus infected
Can you state what OS version you're running, which two AntiViruus
programs your using, and what virus they claim it has?
--David
KI6ZHD
On 06/25/2020 01:53 PM, WB3ILX wrote:
toggle quoted message
Show quoted text
I ran the current drats 039 software on two seperate
with different virus programs and both computers found the same
virus in the drats.exe data file.
|
recent drats.exe file possible virus infected
I ran the current drats 039 software on two seperate with different virus programs and both computers found the same virus in the drats.exe data file.
|
Re: Problem installing d-rats
If you still having issues with the path to your created desktop folder "D-RATS Shared"?try this fix, link below.
|
Patrick Connor
Al Massaro KF5SMH
