Will the RT Systems programming cable work for D-RATS too or will I need another cable?
Rusty
WB4BSD
|
Re: Dstar to packet and Vice Versa
I think it would be very useful.?? Seems like you are talking about a gateway between packet tools and D-RATS.? Interesting idea that I haven't seen anyone attempt. ? But, I believe the first obstacle is the ability to connect a TNC (or AGWPE) to D-RATS in such a way as to pass the traffic in an out.?? I think you would need to connect the packet station to the D-RATS repeater app (aka Ratflector) to make that work.? The repeater app functions like a switch or router, connecting together multiple technologies like D-STAR, packet, telnet, etc.???? It's kind of the connection point.?? Once everybody is connected to the repeater app everyone can see everything.????? ? Here's an example.?? I set up a ratflector using the repeater app.?? I then connected my ratflector to: ??????????????? 1) my D-RATS client app and ??????????????? 2) to another more distant D-RATS ratflector.? ? Anything that happened on either of those to instances of D-RATS was seen by anyone connected to either of them. ?? ? I then set the repeater app on my side up to allow me to connect a D-STAR radio via serial cable.?? Remote stations could then connect their D-RATS instances to mine via D-STAR over RF simplex.?? That added a third instance of D-RATS to the party.?? Everyone on the three D-RATS clients could see everything that was happening. ? Next, I set up an AGWPE (poor man's TNC?) connection on my repeater app to try to connect remote D-RATS users via packet.? ?However, when I restart the repeater app after adding the AGWPE connection the app fails to start and gives an error in the log.?? If I remove the AGWPE connection the repeater app will start back up without an error. ? To sum it up, I think you need the repeater app to accomplish what you are trying to do.? You may or may not need more software, but I think the repeater app is key.? But, while the repeater app appears to allow TNC and AGWPE connections I think there is a bug in the current version that keeps that from working. ? I think there is a lot of utility there if we could get that bug fixed. ? Dan W4DTO
toggle quoted message
Show quoted text
From: d-rats_group@... [mailto:d-rats_group@...] On Behalf Of Leon Singh
Sent: Wednesday, May 15, 2013 12:07 AM
To: d-rats_group@...
Subject: RE: [d-rats_group] Dstar to packet and Vice Versa? ? Hmmmmm ... Tnxs for the info ...... I was looking at the possibility of connecting a tnc / packet radio and also a dstar radio on the same PC , running Drats , in order to have messages that come in via both setups , to be able to route that message to one another .. Email type message or keyboard chat from dstar , can be routed via drats accross to the packet radio , and vice versa . I do think that would be something ( well at least in my island ) , that guys might go for ..... I havent tried it as yet , but will go ahead and see what happens
--
Leon Singh? - 9Z4BM
I am able to do all things through Christ who strengthens me .
|
Hello to all, as almost only d-rats user in Spain.
I leave you a connection of my works it has more than enough d-star and the use of the d-rats.
Excuse the documents are in spanish but ... all be HAM?s
73 from EA1AXY
Excuse my poor english
|
Hi to all ...
I take a time attempting it but it doesn't end up working completely well.
In my case i use Virtual Serial Ports Emulator
Any have a solution with share com port d-rats & icom software at same time ?
greeting from EA1AXY
|
Re: Dstar to packet and Vice Versa
Hmmmmm ... Tnxs for the info ...... I was looking at the possibility of connecting a tnc / packet radio and also a dstar radio on the same PC , running Drats , in order to have messages that come in via both setups , to be able to route that message to one another ..
Email type message or keyboard chat from dstar , can be routed via drats accross to the packet radio , and vice versa . I do think that would be something ( well at least in my island ) , that guys might go for .....
I havent tried it as yet , but will go ahead and see what happens -- Leon Singh? - 9Z4BM
I am able to do all things through Christ who strengthens me .
|
Re: Dstar to packet and Vice Versa
Not sure if it is exactly what you are looking for, but I have used AGW Packet Engine to establish a packet connection between two D-RATS clients.? I was looking for a way to bring non-D-STAR machines and users into D-RATS.??? ?But, I was never quiet able to accomplish my overall goal.?? ? I had hoped to bring up a ratflector for "local use" at an event.??? Local machines would connect to the ratflector using either the local network, D-STAR RF, or packet.?? Once we were linked together we could chat, send messages, and share files locally.?? I had also hoped to link the local ratflector to other ratflectors over the internet or using RF, thereby extending the reach of the local machines. ? I hit a snag, however.? It turns out that while AGWPE (and, presumably TNCs) will work with the D-RATS client app, they will not work with the D-RATS repeater (ratflector) app.? ??The repeater app will not start if there is an AGWPE connection defined in it.??? So, only D-STAR radios can connect to my ratflector. ? We spoke with Dan Smith, the creator of D-RATS, about the problem, and he said he didn't think there was enough interested in running AGWP (or TNCs, I guess) on ratflectors to warrant chasing down the bug.? ??I still think it would be an extremely useful tool, but I'm stuck. ? I do believe D-RATS will allow you to forward messages to and from WL2K, but I'm not sure if it does so over a packet link. ? 73 Dan W4DTO ? ?
|
Dstar to packet and Vice Versa
Is it possible to run packet radio and dstar ( serial ports configured and enabled ) , in order to route messages to each other ?????
Leon / 9Z4BM
|
D-STAR at Dayton Hamvention
Here's the updated list of D-STAR activities at Dayton Hamvention?, please send any updates to info@.... All items are subject to change. Please check for the latest information.
Schedule of D-STAR Events
Thursday, May 16th
7:00PM –
Marion's Piazza 1320 N Fairfield Rd, Beavercreek, OH 45432 (39:43.596N 084:03.192W) (937) 429-3393
Friday, May 17th
8:00AM – (), Drury Inn Ballroom
A three hour class for beginning and more experienced D-STAR users to help you get started and get the most from your D-STAR radio. An Icom ID-31A will be given away to one lucky class participant during the class.
12:45PM – , Forum Room 1 Hara Arena
Moderator: Robin Cutshaw, AA4RC
Speakers: John Davis, WB4QDX, Brian Hoyer, K7UDR, John Hays, K7VE, Robin Cutshaw, AA4RC
D-STAR continues to grow in popularity with over one thousand interconnected gateways and over twenty-five thousand registered users. The last year has seen new hardware and software offerings that continue to expand the capabilities of this already feature rich protocol. The speakers for this forum will review the things you might have missed in the last year and announce some exciting new hardware and software.
7:00PM – Friday Night D-STAR
Drury Inn Ballroom, 6616 Miller Lane, Dayton, OH 45414
Exciting list of speakers . Opportunity to speak to other D-STAR enthusiasts . Icom ID-51A to be given away .
|
Re: Running D-Rats on Raspberry PI and have it autostart on boot
If your running your RPi headless you don't need to launch the X desktop.?
I run a ratflector without having to launch the desktop.? The ratflector application will run from the console.
the syntax is d-rats_reflector -C -d
By not launching the desktop you save both memory and CPU resources.
73, Ed KA8JMW
toggle quoted message
Show quoted text
--- In d-rats_group@..., "k4mkh" wrote:
>
>
> So you want to run D-Rats on the Raspberry Pi and it have automatically launch on power up. The GUI needs to launch every time the Pi starts.
>
> The build we are currently running is Raspbian "wheezy".
>
> This URL will tell you how to install D-Rats on the Pi.
> http://n0so.net/index.php?id=72
>
> The executable files are stored under /usr/bin and are called:
> d-rats > D-Rats communication program
> d-rats_mapdownloader > download maps
> d-rats_repeater > D-Rats repeater
>
> Once the install is completed...
>
> start LXTERMINAL from raspberry PI desktop
>
> cd /etc/xdg/lxsession/LXDE
> sudo leafpad autostart
>
> You need to add the following statement at the end of the file and save the file.
> @d-rats_repeater
>
> All you need to do is to logoff and next time time GUI launches the D-Rats repeater will launch. You will have enable the repeater the 1st time and set your callsign.
>
> Mike K4MKH
> mike.k4mkh 'at' gmail.com
>
|
Re: Running D-Rats on Raspberry PI and have it autostart on boot
That is how I have implemented it but it could be run as standalone without the mesh also.
toggle quoted message
Show quoted text
--- In d-rats_group@..., "gorntz" <radiok4ifx@...> wrote:
This is to use a Raspberry PI as a Ratflector on a MESH I presume.
--- In d-rats_group@..., "k4mkh" <k4mkh@> wrote:
So you want to run D-Rats on the Raspberry Pi and it have automatically launch on power up. The GUI needs to launch every time the Pi starts.
The build we are currently running is Raspbian "wheezy".
This URL will tell you how to install D-Rats on the Pi.
The executable files are stored under /usr/bin and are called:
d-rats > D-Rats communication program
d-rats_mapdownloader > download maps
d-rats_repeater > D-Rats repeater
Once the install is completed...
start LXTERMINAL from raspberry PI desktop
cd /etc/xdg/lxsession/LXDE
sudo leafpad autostart
You need to add the following statement at the end of the file and save the file.
@d-rats_repeater
All you need to do is to logoff and next time time GUI launches the D-Rats repeater will launch. You will have enable the repeater the 1st time and set your callsign.
Mike K4MKH
mike.k4mkh 'at' gmail.com
|
Re: Running D-Rats on Raspberry PI and have it autostart on boot
This is to use a Raspberry PI as a Ratflector on a MESH I presume.
toggle quoted message
Show quoted text
--- In d-rats_group@..., "k4mkh" <k4mkh@...> wrote:
So you want to run D-Rats on the Raspberry Pi and it have automatically launch on power up. The GUI needs to launch every time the Pi starts.
The build we are currently running is Raspbian "wheezy".
This URL will tell you how to install D-Rats on the Pi.
The executable files are stored under /usr/bin and are called:
d-rats > D-Rats communication program
d-rats_mapdownloader > download maps
d-rats_repeater > D-Rats repeater
Once the install is completed...
start LXTERMINAL from raspberry PI desktop
cd /etc/xdg/lxsession/LXDE
sudo leafpad autostart
You need to add the following statement at the end of the file and save the file.
@d-rats_repeater
All you need to do is to logoff and next time time GUI launches the D-Rats repeater will launch. You will have enable the repeater the 1st time and set your callsign.
Mike K4MKH
mike.k4mkh 'at' gmail.com
|
Running D-Rats on Raspberry PI and have it autostart on boot
So you want to run D-Rats on the Raspberry Pi and it have automatically launch on power up. The GUI needs to launch every time the Pi starts.
The build we are currently running is Raspbian "wheezy".
This URL will tell you how to install D-Rats on the Pi.
The executable files are stored under /usr/bin and are called:
d-rats > D-Rats communication program
d-rats_mapdownloader > download maps
d-rats_repeater > D-Rats repeater
Once the install is completed...
start LXTERMINAL from raspberry PI desktop
cd /etc/xdg/lxsession/LXDE
sudo leafpad autostart
You need to add the following statement at the end of the file and save the file.
@d-rats_repeater
All you need to do is to logoff and next time time GUI launches the D-Rats repeater will launch. You will have enable the repeater the 1st time and set your callsign.
Mike K4MKH
mike.k4mkh 'at' gmail.com
|
When I start D-RATS with my DV Dongle running and connected to a repeater (W5MPZ), I see the following error in my Event Log (socket error 10061, connection refused) and D-RATS isn't connected to the Dongle although I have the preferences set correctly.? I assume there is a Windows Socket problem but don't know how to fix it.? The OS is Windows Vista.
--
73 de N4VIP (SFARES EC, SANTA FE AND SAN MIGUEL COUNTIES DEC), Don
|
ID-31A to be given away during Dayton D-STAR Class
If you’ve registered for the D-STAR training at the Drury Inn Ballroom in Dayton during Hamvention on Friday, May 17th, from 8:00am until 11:00am, you already have a chance to win an Icom ID-31A handheld radio to be given away
during the class.? There is still time to register for this comprehensive D-STAR class, but seats are filling up fast.
?
This training will provide the basics for new D-STAR users guiding them through the callsign registration process, getting on the air. easy programming
of your D-STAR radio including the ID-31A and ID-51A radios, and get the most out of handhelds or mobiles.?
More experienced users will benefit from topics including the DV Dongle, DV Access Point, making a hotspot with a Raspberry Pi, D-STAR nets, using D-STAR's high and low speed
data features including the ID-1 radio, and where to find D-STAR resources to get the most out of D-STAR. ?
?
Class size is limited and pre-registration is required.? The cost of the class is $15.00 and all attendees will receive all course materials and a chance to win the Icom ID-31A.?
To register and pay class fee by PayPal, go to .
?
For more info, email
info@...
?
?
|
New file uploaded to d-rats_group
Hello,
This email message is a notification to let you know that
a file has been uploaded to the Files area of the d-rats_group
group.
File : /D-RATS Radio Settings.pdf
Uploaded by : n3tsz <n3tsz@...>
Description : Setting your radio to use with D-RATS.
You can access this file at the URL:
To learn more about file sharing for your group, please visit:
Regards,
n3tsz <n3tsz@...>
|
Outboard email works through normal SMTP, but not SMTP with SSL
I can get outbound emails to send through SMTP port 587; however, outbound emails never go using SMTP / SSL port 465. When I have configured SMTP / SSL the following errors show up on the console:
-- Exception: --
Traceback (most recent call last):
File "/usr/lib/pymodules/python2.7/d_rats/msgrouting.py", line 504, in _run_one
routed = self._route_message(msg, slist, routes)
File "/usr/lib/pymodules/python2.7/d_rats/msgrouting.py", line 484, in _route_message
routed = self._route_via_email(dst, msg)
File "/usr/lib/pymodules/python2.7/d_rats/msgrouting.py", line 413, in _route_via_email
mailer = smtplib.SMTP(server, port)
File "/usr/lib/python2.7/smtplib.py", line 249, in __init__
(code, msg) = self.connect(host, port)
File "/usr/lib/python2.7/smtplib.py", line 310, in connect
(code, msg) = self.getreply()
File "/usr/lib/python2.7/smtplib.py", line 361, in getreply
raise SMTPServerDisconnected("Connection unexpectedly closed")
SMTPServerDisconnected: Connection unexpectedly closed
Is there some configuration step I am missing, perhaps a setting on the Raspberry Pi / wheezy?
TNX!
|
Re: Radio Settings for the ID-51 & ID-31
Thank you so much !! ? 73 KC2YYF
From: John Davis
To: "d-rats_group@..."
Sent: Sunday, April 21, 2013
12:25 PM
Subject: RE: [d-rats_group] Radio Settings for the ID-51 & ID-31
I added the 31 and 51 to the setting table in the D-RATS documentation.? Someone may want to add this attachment to the Files section.
?
John WB4QDX
?
From: sink45ny [mailto:sink45ny@...]
Sent: Sunday, April 21, 2013 11:44 AM
To: d-rats_group@...
Subject: [d-rats_group] Radio Settings for the ID-51 & ID-31
?
?
Can someone please tell me what they are. I have been trying to pass data with friends that have these radios. I can receive their data but they don't receive mine. I have an 880H and a 92AD.
I can successfully transfer data between users of 880H's, 92AD's and dongles.
Your help is much appreciated.
73
KC2YYF
No virus found in this message.
Checked by AVG -
Version: 2013.0.3272 / Virus Database: 3162/6235 - Release Date: 04/09/13
Internal Virus Database is out of date.
|
Re: Radio Settings for the ID-51 & ID-31
I added the 31 and 51 to the setting table in the D-RATS documentation.? Someone may want to add this attachment to the Files section.
?
John WB4QDX
?
toggle quoted message
Show quoted text
From: sink45ny [mailto:sink45ny@...]
Sent: Sunday, April 21, 2013 11:44 AM
To: d-rats_group@...
Subject: [d-rats_group] Radio Settings for the ID-51 & ID-31
?
?
Can someone please tell me what they are. I have been trying to pass data with friends that have these radios. I can receive their data but they don't receive mine. I have an 880H and a 92AD.
I can successfully transfer data between users of 880H's, 92AD's and dongles.
Your help is much appreciated.
73
KC2YYF
No virus found in this message.
Checked by AVG -
Version: 2013.0.3272 / Virus Database: 3162/6235 - Release Date: 04/09/13
Internal Virus Database is out of date.
|
Radio Settings for the ID-51 & ID-31
Can someone please tell me what they are. I have been trying to pass data with friends that have these radios. I can receive their data but they don't receive mine. I have an 880H and a 92AD.
I can successfully transfer data between users of 880H's, 92AD's and dongles.
Your help is much appreciated.
73
KC2YYF
|
Re: Config for gearhead 89 usb keyboard -fixed
edit the keyboard config file and set model to KB1700 and locale to us
toggle quoted message
Show quoted text
--- In d-rats_group@..., "k3mmb" <mm.barrett@...> wrote:
I have a gearheas 89 key keyboard and have not found a correct configuration (yet)..
I have my locale set to en.us.utf-8, there soes not seem to be a keyboard for this unit.
mike
|
Dan Ozment