开云体育

Edfel,

Go to icom.japan.com. Click on the firmware/software icon. Enter IC-9700 in the oval and it will bring up a list of firmware/software. Download and install the USB Driver file that is for multiple radios. It will install 2 Silicon Labs virtual comm ports. Important, you must have your radio connected to the computer with a USB cable in order for these ports to show up in your device manager! Usually, port "A" is the first one listed (lower number). You can check by bringing up device manager, double click on "Ports", then right click on the comm port you want to check. Select properties and then click on details. In the details window you need to change "Property" from "Device Description" to "Device instance path". At the end of the value it will show either an "A" or a "B". I hope this helps.

Doug, N0DAJ

Hi Doug:

Congrats!, could you share your radio settings I also have a IC9700 but never setup serial because not knowing how to.

Thanks in advance!!

73'

Edfel

KP4AJ

On Sun, Sep 3, 2023 at 3:55?PM Doug <n0daj1950@...> wrote:

Problem solved. I retried the "B" comm port and it now works just fine.

-- 
Doug Jarmuth, N0DAJ
Asst District Emergency Coordinator
Yavapai County Arizona
928.231.2616
n0daj1950@...