开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crkits
  2. Topics

Video Upload: Build a Simple RX

 

开云体育

See this video:

Schematic:


Thanks,
Adam
 

Adam,?

Great video, superior than a?detailed paper instruction.
Any beginner can made by himself.
Dozen of builders are making this simple receiver in Japan.

Easier than the MRX-40, QST magazine introduced decades ago,?
the simple receiver give us again something we have been forgotten in QRP spirits.

Nakajima


----- Original Message -----
From: Adam Rong <rongxh@...>
To: [email protected]
Date: 2018/12/22, Sat 23:39
Subject: [crkits] Video Upload: Build a Simple RX

See this video:

Schematic:


Thanks,
Adam
 

What value are the two caps at pins 6 & 7?
Jim WB4ILP


On 9:39AM, Sat, Dec 22, 2018 Adam Rong <rongxh@... wrote:
See this video:

Schematic:


Thanks,
Adam

simple_rx.jpeg

 

开云体育

Jim,

It depends on the load capacitor of the crystal and the mode. The normal load cap is 20 pF, and if you want to receive SSB, you will need to pick two caps to oscillate on the exact marked frequency. If you receive CW, you will need to oscillate a bit off to give you right tone pitch. In my case, I used 39 and 68 to give 700 Hz lower than 7010 crystal with 20 pF load capacitor.

Thanks,
Adam

在 2018年12月25日，上午3:32，Jim Burns <outbackerwb4ilp@...> 写道：

What value are the two caps at pins 6 & 7?
Jim WB4ILP


On 9:39AM, Sat, Dec 22, 2018 Adam Rong <rongxh@... wrote:
See this video:

Schematic:


Thanks,
Adam

<simple_rx.jpeg>
 

Thanks Adam and Merry Christmas !
Jim


On 8:37PM, Mon, Dec 24, 2018 Adam Rong <rongxh@... wrote:
Jim,

It depends on the load capacitor of the crystal and the mode. The normal load cap is 20 pF, and if you want to receive SSB, you will need to pick two caps to oscillate on the exact marked frequency. If you receive CW, you will need to oscillate a bit off to give you right tone pitch. In my case, I used 39 and 68 to give 700 Hz lower than 7010 crystal with 20 pF load capacitor.

Thanks,
Adam

在 2018年12月25日，上午3:32，Jim Burns <outbackerwb4ilp@...> 写道：

What value are the two caps at pins 6 & 7?
Jim WB4ILP


On 9:39AM, Sat, Dec 22, 2018 Adam Rong <rongxh@... wrote:
See this video:

Schematic:


Thanks,
Adam

<simple_rx.jpeg>

simple_rx.jpeg

1 - 5 of 5