开云体育

Hi JE1RAV, Just checked your GitHub page, and I agree that it can co-exist with the Bluetooth module from the hardware perspective. However, different configuration needs different firmware, as the

Dear Adam, I think it can coexist, but I can not test it. Hitoshi, JE1RAV

JE1RAV, Thanks for the modification. Can it coexist with Bluetooth module? Thanks, Adam

I modified ADX-S v2 for use with "trusdx-audio". In this case, an additional audio amplifier board is mounted on the opposite side of the optional Bluetooth board. A jumper cable is connected to A3

We started a club station BY6DX in 2002 with a dipole and a Yaesu FT-757. Now it is still quite actively operated by young members. Thanks, Adam

OK Adam, I'll take a look. Yes, those college days were great. I graduated from Eastern Kentucky University in 1975 with a degree in industrial technology. It's has helped me make a living. I got to

Hi Jim, Thanks for pointing out. If you check out the English web page of USTC, you will find the bird eye photo of the library building. I operated QRP with my homebrew rig and an NVIS antenna. I

Hi Adam, I see by your email address suffix that you are associated with the University of Science and Technology of China. Thank You for bringing that level of expertise to our amateur radio hobby

Guys, Please treat this message as the formal announcement to the worldwide. ADX-S V2 is now ready to take big volume orders. Actually I already shipped a big box to a builders' group in Europe

Yes. If reversed, the LED should be solid on no matter what bias is chosen by the jumper. Thanks, Adam

Adan, thanks. Is it D-G-S top to bottom on schematic? JP

Guys, Made a simple tester for BS170 as you may find two different pin out in the market. We already know 2N7000 has reversed pin out with BS170. Thanks, Adam

The following files and folders have been updated in the Files area of the [email protected] group. * /ADX-S/V2/ADX-S V2 Kit Assembly Manual V1.0.pdf (

Happy Holiday Adam ! Have Fun ! Jim WB4ILP [email protected]> wrote:

Guys, I am spending holiday now. No shipping from May 1 to 5. Thanks, Adam

Folks, Someone asked me this question. The answer is yes and no. If your V1 kit is not yet assembled, it is pretty easy to obtain an upgrade kit from CRKITS.COM and do the upgrade, as most of the V1

The following files and folders have been updated in the Files area of the [email protected] group. * /ADX-S/V2/ADX-S V2 Kit Assembly Manual V0.3.pdf (

The following files and folders have been uploaded to the Files area of the [email protected] group. * /ADX-S/V2/ADX_S_V2.0.ino ( /g/crkits/files/ADX-S/V2/ADX_S_V2.0.ino ) *By:* Adam

Finally it arrived. Thanks for your nice words. It is a simple yet useful design. Thanks, Adam

Adam. I received the TXCO boards today and I have to admit they are perfect for the application!? Nice and small, fit nicely on the Adafruit type boards.? They look very nice.? Much better than the