Re: TCXOM is ready for order
Hi Fred, Hot air or heating plate are the best. If you don¡¯t have either of them, a solder iron of high power (60-100W) will do the job. Just touch the metal surface and wait for solder melt and
By
Adam Rong
·
#4776
·
|
Re: TCXOM is ready for order
Oh. And by the way, what is your preferred technique on removing the existing crystal on the si module?? Hot air? Fred W0FMS/7
By
Fred Spinner
·
#4775
·
|
Re: TCXOM is ready for order
Wow, they went fast!? I bought some 25 MHz TXCOs to play with so I can wait-- but I really would like to make the ADX-S a clean mod, so let us know when you stock back up.? I easily can wait two
By
Fred Spinner
·
#4774
·
|
Re: TCXOM is ready for order
Tom, Go ahead. After this, I still have 2. Thanks, Adam
By
Adam Rong
·
#4773
·
|
Re: TCXOM is ready for order
Adam- Is there enough stock to order just one reworked TCXOM module and ship it to the US? Tom M KN6OKY
By
Tom KN6OKY
·
#4772
·
|
Re: TCXOM is ready for order
Guys, Please check with me before your order, unless you can wait for 2 weeks. I have very limited stock now. My email/PayPal is rongxh@.... Thanks, Adam
By
Adam Rong
·
#4771
·
|
Re: TCXOM is ready for order
Yes, Barb. The error is just 2ppm, or 28Hz at 14MHz. Thanks, Adam
By
Adam Rong
·
#4770
·
|
Re: TCXOM is ready for order
Adam, That¡¯s exactly what I am curious of,If I can eliminate calibration altogether from code. -- 73 Barb WB2CBA
By
Barb WB2CBA
·
#4769
·
|
Re: TCXOM is ready for order
Tom, It is my major intention to design the daughter board. The reworked module is just for your convenience if you don't feel comfortable to play with the small daughter board. After you replace the
By
Adam Rong
·
#4768
·
|
Re: TCXOM is ready for order
Adam- I am late to the conversation but this got my attention. Can the reworked module and daughterboard be swapped into an existing ADX-S board for better stability and performance? Tom M KN6OKY
By
Tom KN6OKY
·
#4767
·
|
Re: TCXOM is ready for order
Thanks, Barb! The calibration parameter should be very close to 0 instead of 10000. Thanks, Adam
By
Adam Rong
·
#4766
·
|
Re: TCXOM is ready for order
Adam, This tcxo mod is interesting! I ordered one reworked module to play with. Sent 15$ for module plus shipping via paypal to you. -- 73 Barb WB2CBA
By
Barb WB2CBA
·
#4765
·
|
Re: TCXOM is ready for order
Sent in an order. Hope I got it correct: (2) TCXOM - 5 USD each (1) Reworked 5351 module with TCXOM - 10 USD each Shipping - 5 USD each order total 25USD Mike n2MS
By
Mike N2MS
·
#4764
·
|
Re: TCXOM is ready for order
Guys, Shall I make the math simpler by adding 10 cents each? Let¡¯s make: TCXOM - 5 USD each Reworked 5351 module with TCXOM - 10 USD each Shipping - 5 USD each order The 1st lot will be gone soon. I
By
Adam Rong
·
#4763
·
|
Re: TCXOM is ready for order
Thanks Bill. I can match your order. Thanks, Adam
By
Adam Rong
·
#4762
·
|
Re: TCXOM is ready for order
Hi Adam Just ordered 2 modules and 1 daughter board, $24.70USD total but the new Paypal system didn't offer a message to seller option, so I hope you will be able to link the payment to this post? 73
By
Bill Maxwell
·
#4761
·
|
Re: TCXOM is ready for order
Hi adam, I forgot to pay for the Shipping. I will send you in addition 5 Dollars . 9.9 +5 = 14.90 . 73 Matt Am 10.03.2024 um 22:19 schrieb Adam Rong:
By
DL1SER
·
#4760
·
|
Re: TCXOM is ready for order
Doug, It makes perfect sense. However, you guys put work on my side, hi hi. The green daughter boards are readily available but I will find time to rework the 5351 modules, so you will need to wait
By
Adam Rong
·
#4759
·
|
Re: TCXOM is ready for order
The shipping is still 5 bucks, Mike. Thanks, Adam
By
Adam Rong
·
#4758
·
|
Re: TCXOM is ready for order
I just ordered two of the complete modules. When I saw your first posting showing the mod I ordered some TCXO's from Aliexpress planning to do the modification myself. When they arrived I had to use a
By
Doug Lung
·
#4757
·
|