开云体育

Thanks Adam...No need or desire for an amplifier...1 watt is plenty and gives me the challenge I'm looking for...I get a lot of replies with QRP in the CQ message...Anything greater than QRP is just

Kind reminder: Don’t add an amplifier for a DSB transceiver for digital, as your neighbors will complain to you about adjacent channel interference. Thanks, Adam

Hi Thomas...Thanks for the kind words...First, I am still new to FT8...I was introduced to it at Field Day this year...I am not an expert in anything but I've always been a builder so Adam's kit

Sorry Jim, one last question. The way you have the PIE mounted on the back of the screen. Was that something that you came up with on your own or was there a mounting spot on the back? Sorry if it

Hello Jim, I want to HIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIGHLY COMMEND you on that project. When I saw this my EYEs got so big. This is absolutely AMAZING MAN!!!! I want this EXACT setup brother. It

Just a tip about posting ePrey (eBay) URLs, you don't need to include anything from the question mark and onward, so, the URLs posted can be simplified

If you had to buy everything "brand new" you'd probably be under $200...Not bad for a complete portable/mobile/fixed FT8 station...

Thank you

Here are examples of the components I used...You can shop around for best prices but this Sunfounder monitor and GPS dongle in particular are what you want...I got mine open box for $40...The other

Jim Would you be kind enough to share a parts list for your set up looks very sharp. You can email me direct if you wish. Looks like a perfect setup to keep in the car. Tom K0amd

Here are some pictures of my mini FT8 station I built for Field Day. It is built around a Sunfounder 7" hi-res screen and Raspberry Pi 3B. It uses a wireless keyboard/mouse combo, $15 GPS module and

I also applied the KD1JV diode mod and VOX resistor mod...

I think probably it is a good time to join the Black Friday Sale: HT-1A kit or assembled kit 10% off by manual partial refund This Friday to Sunday only Ship in 3 days Thanks, Adam

Thank you Adam. Keep bringing us kits!

| | | | Thank you Adam.And happy thanksgiving to the group.BOB? AF2DX

Thanks for all your support. Happy thanksgiving to USA and the rest of the world. Thanks, Adam, BD6CR CRKITS.COM

I applied the following changes...Changed C5 to 105 and C6 to 103 (capacitive vs resistive divider) and applied audio drive just above the threshold for reliable VOX PTT...My DSB output went down to

Around 7V? Is 78L05 in the right place? Thanks, Adam

In my case I had an issue with the solder joints for the coils: the enamel wasn't properly removed. TX would trigger but my signal was not spotted anywhere. I would recommend checking these joints,

Interesting so I just called cq on my other radio while monitoring the audio out put of the DSB and I can hear the signal but its really crappy. I.e I dont think it would successfully decode in