Hello Adam , my email?
Thanks?
|
Hi, thanks Adam, what is your email? Regards
|
Hi Juan,
I don't have the firmware, so if you have purchased the right one, you can contact me offline how to configure it.
Thanks, Adam
Hi Adam, thanks for the reply. Is it possible to share the AT commands and firmware version? I don't have the knowledge to program the AT commands. I would understand if you didn't want to share the information, but if you share it I would be grateful. Thanks and 73.
|
Hi Adam, thanks for the reply. Is it possible to share the AT commands and firmware version? I don't have the knowledge to program the AT commands. I would understand if you didn't want to share the information, but if you share it I would be grateful. Thanks and 73.
|
Hi Juan,
Yes, you will need to configure it using AT commands. In my case, 14 commands sent. Make sure you have purchased the correct firmware version “DAC” first.
toggle quoted message
Show quoted text
在 2025年1月12日，23:00，JUAN AGUSTIN via groups.io <avemirat@...> 写道：
? Hello, I have modified my adx-s to install the bt401 module, but I have the problem that it is not bidirectional, when changing the ft8cn software to TX the bt401 module does not send the audio to the adx. Should I configure something else in the bt401? Thanks
|
Hello, I have modified my adx-s to install the bt401 module, but I have the problem that it is not bidirectional, when changing the ft8cn software to TX the bt401 module does not send the audio to the adx. Should I configure something else in the bt401? Thanks
|
For Sale: CRK-10A 7030 KHz
Hi all,
?
With the new year, I am thinning the radio collection. I have a CRK-10A 7030 KHz assembled for sale on Ebay ()
?
It's the version for 7030 KHz and puts out about 2.25 watts with a 13.8VDC supply. There are a bunch of pictures on Ebay. The transceiver is in excellent condition.
?
I am asking $60 plus $10 shipping.
?
Thanks,
?
Andrew?
N4WT
|
Re: New CR-1,2,3 Kits for Kids
Guys,
If you need to order CR-1 or CR-2 or CR-3 kit only, please PayPal 18 USD including shipping to rongxh@...
Thanks,
Adam
toggle quoted message
Show quoted text
在 2024年12月29日，23:27，Adam Rong via groups.io <rongxh@...> 写道：
?Hi Paula,
They were already soldered.
Thanks,
Adam
在 2024年12月29日，23:24，Paula Bean via groups.io <paula.j.bean@...> 写道：
?Hi,
The kits before Chinese New Year are ready to ship now.
I suspect the small SMD IC is already soldered to the board?
Holiday greetings,
|
Re: New CR-1,2,3 Kits for Kids
Hi Paula,
They were already soldered.
Thanks,
Adam
toggle quoted message
Show quoted text
在 2024年12月29日，23:24，Paula Bean via groups.io <paula.j.bean@...> 写道：
?Hi,
The kits before Chinese New Year are ready to ship now.
I suspect the small SMD IC is already soldered to the board?
Holiday greetings,
|
Re: New CR-1,2,3 Kits for Kids
Hi, The kits before Chinese New Year are ready to ship now.
I suspect the small SMD IC is already soldered to the board? Holiday greetings,
|
The following items have been added to the Files area of the [email protected] group.
By: Adam Rong <rongxh@...>
Description:
Assembly Manual in Chinese. Part list is a bit different. FYI.
|
Re: New CR-1,2,3 Kits for Kids
Guys,
The kits before Chinese New Year are ready to ship now. Much
earlier than expected. The early bird price is 45 USD for all
3 kits including air shipping. The next batch will be after
the new year holiday. Please PayPal directly to rongxh@... and
leave your ship to address and telephone number. If you wish to
buy 2 kits, the price is 88 USD.
Thanks,
Adam
在 2024/12/25 22:04, Adam Rong via
groups.io 写道:
toggle quoted message
Show quoted text
Guys,
Merry Christmas! Now you can see the photos of the whole set of
three (forget about the new camera battery and charger):
The kits are co-designed with a teacher in Beijing for
youngsters in China for regional and national contests. We are
glad to offer kits to our group members as well.
CR-1: Audio Morse code trainer with volume and tone controls
(the on-board speaker is not a part of the kit)
CR-2: FM transmitter of 87.5-88.7 MHz, five frequencies, and
it can sit on top of the CR-1 to support voice or morse code
transmission. Without the external antenna, it can transmit to
the next room
CR-3: FM receiver in two modes, one for general coverage of
87-108 MHz, and the other is for 87-89MHz to work with CR-2 (a
wire antenna is supplied, but the on-board speaker is not a
part of the kit)
The PCB size is 60 x 90 mm.
The early bird price is 45 USD for all 3 kits including air
shipping. I can ship in 2 weeks before Chinese New Year.
The next batch will be after the new year holiday. Please PayPal
directly to rongxh@...
and leave your ship to address and telephone number. If you
wish to buy 2 kits, the price is 88 USD.
Thanks,
Adam
|
Re: 13TR: 6 kits left before EOL
Adam, I sent you the payment via PayPal for CR1,2 and 3 and also three 7.078 crystals
?
73 and thanks
|
Re: 13TR: 6 kits left before EOL
Sure, Noel. Sent the price to your yahoo.com email address.
Thanks,
Adam
在 2024/12/27 9:09, Noel Rodriguez via
groups.io 写道:
toggle quoted message
Show quoted text
Thanks,
?
Adam,
for some reason I am missing one 7078 oscillator to
complete my 13R,? I have been looking around the net but I
have no found a seller of this item.
Do you have a spare one (or 2) I can purchase from you?
?
( I can add the amount to cover the replacement cost when I
order the CR-1,2 and 3)
?
Let me know if this is possible.
?
73?
?
Let me know.
|
Re: 13TR: 6 kits left before EOL
Thanks,
?
Adam,
for some reason I am missing one 7078 oscillator to complete my 13R,? I have been looking around the net but I have no found a seller of this item.
Do you have a spare one (or 2) I can purchase from you?
?
( I can add the amount to cover the replacement cost when I order the CR-1,2 and 3)
?
Let me know if this is possible.
?
73?
?
Let me know.
|
Re: New CR-1,2,3 Kits for Kids
Hi Noel,
The price is 45 USD for the set of 3 kits, and 88 USD for 2 sets.
The SMD chips are pre-soldered, so don't worry. You need to
prepare total 8x AAA size batteries. You can use headphone if you
don't have small speakers on hand.
Thanks,
Adam
在 2024/12/26 2:44, Noel Rodriguez via
groups.io 写道:
toggle quoted message
Show quoted text
Hire much for the set of 3?
Guys,
Merry Christmas! Now you can see the photos of the whole
set of three (forget about the new camera battery and
charger):
The kits are co-designed with a teacher in Beijing for
youngsters in China for regional and national contests. We
are glad to offer kits to our group members as well.
CR-1: Audio Morse code trainer with volume and tone
controls (the on-board speaker is not a part of the kit)
CR-2: FM transmitter of 87.5-88.7 MHz, five
frequencies, and it can sit on top of the CR-1 to
support voice or morse code transmission. Without the
external antenna, it can transmit to the next room
CR-3: FM receiver in two modes, one for general
coverage of 87-108 MHz, and the other is for 87-89MHz to
work with CR-2 (a wire antenna is supplied, but the
on-board speaker is not a part of the kit)
The PCB size is 60 x 90 mm.
The early bird price is 45 USD for all 3 kits
including air shipping. I can ship in 2 weeks before
Chinese New Year. The next batch will be after the new
year holiday. Please PayPal directly to rongxh@...
and leave your ship to address and telephone number. If
you wish to buy 2 kits, the price is 88 USD.
Thanks,
Adam
|
Re: New CR-1,2,3 Kits for Kids
Hire much for the set of 3?
Guys,
Merry Christmas! Now you can see the photos of the whole set of
three (forget about the new camera battery and charger):
The kits are co-designed with a teacher in Beijing for youngsters
in China for regional and national contests. We are glad to offer
kits to our group members as well.
CR-1: Audio Morse code trainer with volume and tone controls
(the on-board speaker is not a part of the kit)
CR-2: FM transmitter of 87.5-88.7 MHz, five frequencies, and it
can sit on top of the CR-1 to support voice or morse code
transmission. Without the external antenna, it can transmit to
the next room
CR-3: FM receiver in two modes, one for general coverage of
87-108 MHz, and the other is for 87-89MHz to work with CR-2 (a
wire antenna is supplied, but the on-board speaker is not a part
of the kit)
The PCB size is 60 x 90 mm.
The early bird price is 45 USD for all 3 kits including air
shipping. I can ship in 2 weeks before Chinese New Year. The
next batch will be after the new year holiday. Please PayPal
directly to rongxh@... and leave your ship to address
and telephone number. If you wish to buy 2 kits, the price is
88 USD.
Thanks,
Adam
|
New CR-1,2,3 Kits for Kids
Guys,
Merry Christmas! Now you can see the photos of the whole set of
three (forget about the new camera battery and charger):
The kits are co-designed with a teacher in Beijing for youngsters
in China for regional and national contests. We are glad to offer
kits to our group members as well.
CR-1: Audio Morse code trainer with volume and tone controls
(the on-board speaker is not a part of the kit)
CR-2: FM transmitter of 87.5-88.7 MHz, five frequencies, and it
can sit on top of the CR-1 to support voice or morse code
transmission. Without the external antenna, it can transmit to
the next room
CR-3: FM receiver in two modes, one for general coverage of
87-108 MHz, and the other is for 87-89MHz to work with CR-2 (a
wire antenna is supplied, but the on-board speaker is not a part
of the kit)
The PCB size is 60 x 90 mm.
The early bird price is 45 USD for all 3 kits including air
shipping. I can ship in 2 weeks before Chinese New Year. The
next batch will be after the new year holiday. Please PayPal
directly to rongxh@... and leave your ship to address
and telephone number. If you wish to buy 2 kits, the price is
88 USD.
Thanks,
Adam
|
Thanks for your interest. Here is kit 2 of 3: a micro power FM
transmitter.
Thanks,
Adam
在 2024/12/18 9:31, Michael VK3VMM via
groups.io 写道:
toggle quoted message
Show quoted text
Good afternoon.
I'd be very interested in this.
Michael
Guys,
I just developed a new board kit for a domestic customer and I
am wondering if you guys will be interested as well. It draws
13 mA and 4x AAA size batteries will last quite long time. You
can adjust tone from 600 to 1000 Hz and volume as well. You
can plug in headphone or connect a small speaker. The buzzer
will not be a part of the kit for worldwide as it is magnetic.
Thanks,
Adam
|
Good afternoon.
I'd be very interested in this.
Michael
Guys,
I just developed a new board kit for a domestic customer and I am wondering if you guys will be interested as well. It draws 13 mA and 4x AAA size batteries will last quite long time. You can adjust tone from 600 to 1000 Hz and volume as well. You can plug in headphone or connect a small speaker. The buzzer will not be a part of the kit for worldwide as it is magnetic.
Thanks,
Adam
|
Paula Bean
Michael VK3VMM