在 2024年4月23日，12:14，Fred Spinner via groups.io <fred.spinner@...> 写道：

?Adam. I received the TXCO boards today and I have to admit they are perfect for the application!? Nice and small, fit nicely on the Adafruit type boards.? They look very nice.? Much better than the ones I hacked together on perfboard!? ?I will eventually also order a V2 ADX-S kit... Have some medical things to get through first, so I won't be doing much building for several weeks.? ?I am still having a blast with your kits!

Fred W0FMS/7

Yes, I still have 3.

On 2024/4/19 18:09, Jim WB4ILP via groups.io wrote:

Hi Adam !

Do you have two 20M Pixie available?

Thank You !

Jim

On Thu, Apr 18, 2024, 5:26 PM Adam Rong via <rongxh=[email protected]> wrote:

Guys,

I still have Pixie 20m kits left.

Thanks,

Adam

在 2024年4月14日，11:29，Adam Rong via <rongxh=[email protected]> 写道：

?Guys,

20m Pixie2023 kit 15 USD each including shipping. I prepared 5 kits. Contact me offline rongxh@...

Thanks,

Adam

在 2024年4月14日，07:29，Adam Rong via <rongxh=[email protected]> 写道：

?

Wayne,

It is a remarkable result operating Pixie. Here in China, we suffer from strong BCI so the receiver is always overloaded.

Thanks,

Adam

On 2024/4/13 22:07, Wayne Steury wrote:

Adam, thank you for that good information. In my location in the mountains of Colorado I can do much better on 20 m with my pixie then 40 m.? I have worked 34 states with my pixie and a dipole.?

Wayne Steury. N9EGT?

On Sat, Apr 13, 2024 at 7:37?AM Adam Rong <rongxh@...> wrote:

Guys,

I have done the modification to 20m band.

You will need the following parts as a set:

1x 14.060 MHz crystal in the PCB location 40m XTAL

1x T37-6, 12 turns in the PCB location 121

2x 220 or 240 pF in the PCB location 471

2x 47 pF, one in parallel with T37-6, one to replace 100 pF coupling capacitor

1x 33k to replace 47k as the bias resistor for the final if necessary

1x PH2222, PN2222 or 2N2222 to improve output, hFE around 230 is preferred, if it is less than 200, use the above 33k

Thanks,

Adam

On 2024/4/13 9:59, Jim WB4ILP wrote:

Hi Adam,

Yes, I would take a couple of the 20M Pixie.

Thanks !

Jim WB4ILP?

On Fri, Apr 12, 2024, 7:27 PM Adam Rong <rongxh@...> wrote:

Hi Niece,

I will find some time to design a 3D print case. Thanks for asking.

Meanwhile, I will consider a 20m Pixie2023 if you guys like it. I have 14060 crystals in stock, plenty.

Thanks,

Adam

On 2024/4/11 8:15, Niece KA1ULN wrote:

HI? am? I loving? my? ?crkits? ?pixie.? I? did? ?the? ? 40-20 mod
and? N9EGT? reviewed? it? to make? sure? all was? good.

so it? works.? BUT

I am? ?curious? if? anyone has? printed a? container /shell for the? pixie?
tnx Niece

Yes, I still have 3.

On 2024/4/19 18:09, Jim WB4ILP via groups.io wrote:

Hi Adam !

Do you have two 20M Pixie available?

Thank You !

Jim

On Thu, Apr 18, 2024, 5:26 PM Adam Rong via <rongxh=[email protected]> wrote:

Guys,

I still have Pixie 20m kits left.

Thanks,

Adam

在 2024年4月14日，11:29，Adam Rong via <rongxh=[email protected]> 写道：

?Guys,

20m Pixie2023 kit 15 USD each including shipping. I prepared 5 kits. Contact me offline rongxh@...

Thanks,

Adam

在 2024年4月14日，07:29，Adam Rong via <rongxh=[email protected]> 写道：

?

Wayne,

It is a remarkable result operating Pixie. Here in China, we suffer from strong BCI so the receiver is always overloaded.

Thanks,

Adam

On 2024/4/13 22:07, Wayne Steury wrote:

Adam, thank you for that good information. In my location in the mountains of Colorado I can do much better on 20 m with my pixie then 40 m.? I have worked 34 states with my pixie and a dipole.?

Wayne Steury. N9EGT?

On Sat, Apr 13, 2024 at 7:37?AM Adam Rong <rongxh@...> wrote:

Guys,

I have done the modification to 20m band.

You will need the following parts as a set:

1x 14.060 MHz crystal in the PCB location 40m XTAL

1x T37-6, 12 turns in the PCB location 121

2x 220 or 240 pF in the PCB location 471

2x 47 pF, one in parallel with T37-6, one to replace 100 pF coupling capacitor

1x 33k to replace 47k as the bias resistor for the final if necessary

1x PH2222, PN2222 or 2N2222 to improve output, hFE around 230 is preferred, if it is less than 200, use the above 33k

Thanks,

Adam

On 2024/4/13 9:59, Jim WB4ILP wrote:

Hi Adam,

Yes, I would take a couple of the 20M Pixie.

Thanks !

Jim WB4ILP?

On Fri, Apr 12, 2024, 7:27 PM Adam Rong <rongxh@...> wrote:

Hi Niece,

I will find some time to design a 3D print case. Thanks for asking.

Meanwhile, I will consider a 20m Pixie2023 if you guys like it. I have 14060 crystals in stock, plenty.

Thanks,

Adam

On 2024/4/11 8:15, Niece KA1ULN wrote:

HI? am? I loving? my? ?crkits? ?pixie.? I? did? ?the? ? 40-20 mod
and? N9EGT? reviewed? it? to make? sure? all was? good.

so it? works.? BUT

I am? ?curious? if? anyone has? printed a? container /shell for the? pixie?
tnx Niece

Hi Adam !

Do you have two 20M Pixie available?

Thank You !

Jim

On Thu, Apr 18, 2024, 5:26 PM Adam Rong via <rongxh=[email protected]> wrote:

Guys,

I still have Pixie 20m kits left.

Thanks,

Adam

在 2024年4月14日，11:29，Adam Rong via <rongxh=[email protected]> 写道：

?Guys,

20m Pixie2023 kit 15 USD each including shipping. I prepared 5 kits. Contact me offline rongxh@...

Thanks,

Adam

在 2024年4月14日，07:29，Adam Rong via <rongxh=[email protected]> 写道：

?

Wayne,

It is a remarkable result operating Pixie. Here in China, we suffer from strong BCI so the receiver is always overloaded.

Thanks,

Adam

On 2024/4/13 22:07, Wayne Steury wrote:

Adam, thank you for that good information. In my location in the mountains of Colorado I can do much better on 20 m with my pixie then 40 m.? I have worked 34 states with my pixie and a dipole.?

Wayne Steury. N9EGT?

On Sat, Apr 13, 2024 at 7:37?AM Adam Rong <rongxh@...> wrote:

Guys,

I have done the modification to 20m band.

You will need the following parts as a set:

1x 14.060 MHz crystal in the PCB location 40m XTAL

1x T37-6, 12 turns in the PCB location 121

2x 220 or 240 pF in the PCB location 471

2x 47 pF, one in parallel with T37-6, one to replace 100 pF coupling capacitor

1x 33k to replace 47k as the bias resistor for the final if necessary

1x PH2222, PN2222 or 2N2222 to improve output, hFE around 230 is preferred, if it is less than 200, use the above 33k

Thanks,

Adam

On 2024/4/13 9:59, Jim WB4ILP wrote:

Hi Adam,

Yes, I would take a couple of the 20M Pixie.

Thanks !

Jim WB4ILP?

On Fri, Apr 12, 2024, 7:27 PM Adam Rong <rongxh@...> wrote:

Hi Niece,

I will find some time to design a 3D print case. Thanks for asking.

Meanwhile, I will consider a 20m Pixie2023 if you guys like it. I have 14060 crystals in stock, plenty.

Thanks,

Adam

On 2024/4/11 8:15, Niece KA1ULN wrote:

HI? am? I loving? my? ?crkits? ?pixie.? I? did? ?the? ? 40-20 mod
and? N9EGT? reviewed? it? to make? sure? all was? good.

so it? works.? BUT

I am? ?curious? if? anyone has? printed a? container /shell for the? pixie?
tnx Niece

在 2024年4月14日，11:29，Adam Rong via groups.io <rongxh@...> 写道：

?Guys,

20m Pixie2023 kit 15 USD each including shipping. I prepared 5 kits. Contact me offline rongxh@...

Thanks,

Adam

在 2024年4月14日，07:29，Adam Rong via groups.io <rongxh@...> 写道：

?

Wayne,

It is a remarkable result operating Pixie. Here in China, we suffer from strong BCI so the receiver is always overloaded.

Thanks,

Adam

On 2024/4/13 22:07, Wayne Steury wrote:

Adam, thank you for that good information. In my location in the mountains of Colorado I can do much better on 20 m with my pixie then 40 m.? I have worked 34 states with my pixie and a dipole.?

Wayne Steury. N9EGT?

On Sat, Apr 13, 2024 at 7:37?AM Adam Rong <rongxh@...> wrote:

Guys,

I have done the modification to 20m band.

You will need the following parts as a set:

1x 14.060 MHz crystal in the PCB location 40m XTAL

1x T37-6, 12 turns in the PCB location 121

2x 220 or 240 pF in the PCB location 471

2x 47 pF, one in parallel with T37-6, one to replace 100 pF coupling capacitor

1x 33k to replace 47k as the bias resistor for the final if necessary

1x PH2222, PN2222 or 2N2222 to improve output, hFE around 230 is preferred, if it is less than 200, use the above 33k

Thanks,

Adam

On 2024/4/13 9:59, Jim WB4ILP wrote:

Hi Adam,

Yes, I would take a couple of the 20M Pixie.

Thanks !

Jim WB4ILP?

On Fri, Apr 12, 2024, 7:27 PM Adam Rong <rongxh@...> wrote:

Hi Niece,

I will find some time to design a 3D print case. Thanks for asking.

Meanwhile, I will consider a 20m Pixie2023 if you guys like it. I have 14060 crystals in stock, plenty.

Thanks,

Adam

On 2024/4/11 8:15, Niece KA1ULN wrote:

HI? am? I loving? my? ?crkits? ?pixie.? I? did? ?the? ? 40-20 mod
and? N9EGT? reviewed? it? to make? sure? all was? good.

so it? works.? BUT

I am? ?curious? if? anyone has? printed a? container /shell for the? pixie?
tnx Niece

在 2024年4月14日，07:29，Adam Rong via groups.io <rongxh@...> 写道：

?

Wayne,

It is a remarkable result operating Pixie. Here in China, we suffer from strong BCI so the receiver is always overloaded.

Thanks,

Adam

On 2024/4/13 22:07, Wayne Steury wrote:

Adam, thank you for that good information. In my location in the mountains of Colorado I can do much better on 20 m with my pixie then 40 m.? I have worked 34 states with my pixie and a dipole.?

Wayne Steury. N9EGT?

On Sat, Apr 13, 2024 at 7:37?AM Adam Rong <rongxh@...> wrote:

Guys,

I have done the modification to 20m band.

You will need the following parts as a set:

1x 14.060 MHz crystal in the PCB location 40m XTAL

1x T37-6, 12 turns in the PCB location 121

2x 220 or 240 pF in the PCB location 471

2x 47 pF, one in parallel with T37-6, one to replace 100 pF coupling capacitor

1x 33k to replace 47k as the bias resistor for the final if necessary

1x PH2222, PN2222 or 2N2222 to improve output, hFE around 230 is preferred, if it is less than 200, use the above 33k

Thanks,

Adam

On 2024/4/13 9:59, Jim WB4ILP wrote:

Hi Adam,

Yes, I would take a couple of the 20M Pixie.

Thanks !

Jim WB4ILP?

On Fri, Apr 12, 2024, 7:27 PM Adam Rong <rongxh@...> wrote:

Hi Niece,

I will find some time to design a 3D print case. Thanks for asking.

Meanwhile, I will consider a 20m Pixie2023 if you guys like it. I have 14060 crystals in stock, plenty.

Thanks,

Adam

On 2024/4/11 8:15, Niece KA1ULN wrote:

HI? am? I loving? my? ?crkits? ?pixie.? I? did? ?the? ? 40-20 mod
and? N9EGT? reviewed? it? to make? sure? all was? good.

so it? works.? BUT

I am? ?curious? if? anyone has? printed a? container /shell for the? pixie?
tnx Niece

Adam, thank you for that good information. In my location in the mountains of Colorado I can do much better on 20 m with my pixie then 40 m.? I have worked 34 states with my pixie and a dipole.?

Wayne Steury. N9EGT?

On Sat, Apr 13, 2024 at 7:37?AM Adam Rong <rongxh@...> wrote:

Guys,

I have done the modification to 20m band.

You will need the following parts as a set:

1x 14.060 MHz crystal in the PCB location 40m XTAL

1x T37-6, 12 turns in the PCB location 121

2x 220 or 240 pF in the PCB location 471

2x 47 pF, one in parallel with T37-6, one to replace 100 pF coupling capacitor

1x 33k to replace 47k as the bias resistor for the final if necessary

1x PH2222, PN2222 or 2N2222 to improve output, hFE around 230 is preferred, if it is less than 200, use the above 33k

Thanks,

Adam

On 2024/4/13 9:59, Jim WB4ILP wrote:

Hi Adam,

Yes, I would take a couple of the 20M Pixie.

Thanks !

Jim WB4ILP?

On Fri, Apr 12, 2024, 7:27 PM Adam Rong <rongxh@...> wrote:

Hi Niece,

I will find some time to design a 3D print case. Thanks for asking.

Meanwhile, I will consider a 20m Pixie2023 if you guys like it. I have 14060 crystals in stock, plenty.

Thanks,

Adam

On 2024/4/11 8:15, Niece KA1ULN wrote:

HI? am? I loving? my? ?crkits? ?pixie.? I? did? ?the? ? 40-20 mod
and? N9EGT? reviewed? it? to make? sure? all was? good.

so it? works.? BUT

I am? ?curious? if? anyone has? printed a? container /shell for the? pixie?
tnx Niece

Looks really good and it is what I expected from talking to you off line, now that I see the updated schematic.? I likely will buy one once things settle down a bit for me.? This new rig with a Bluetooth phone or tablet or even a Bluetooth connection on a laptop is going to be an unstoppable portable POTA/SOTA digital rig.

Fred W0FMS?

HI? am? I loving? my? ?crkits? ?pixie.? I? did? ?the? ? 40-20 mod
and? N9EGT? reviewed? it? to make? sure? all was? good.

so it? works.? BUT

I am? ?curious? if? anyone has? printed a? container /shell for the? pixie?
tnx Niece