¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
IMD performance of D4D
Folks, One of potential customers asked about the IMD performance and I think it is a good question. I have to clarify here when I wrote spurious suppression of -50dBc. It is actually for harmonics of
By Adam Rong · #2591 ·
Re: D4D: Ready to Take Order
Very well. I have played music when dummy load is connected and it is quite high quality. However, you will need to inject quite high level volume (>600mV Vp) to activate VOX and you will need an
By Adam Rong · #2590 ·
Re: D4D: Ready to Take Order
How well will these work on Voice (with a proper Freq Xtal)?
By Casey · #2589 ·
Re: D4D: Ready to Take Order
Folks, As I have promised, I created a button and you can order directly from my web site: http://crkits.com Due to the unexpected stability issue, I have to postpone the first shipment date from May
By Adam Rong · #2588 ·
Re: D4D: 20m version needs more time
Folks, I am pleased to announce that the issue was found. I will take time to verify the fix and the shipment will be pushed out for about a week. To play safe, I will check 40m as well. Sorry for the
By Adam Rong · #2587 ·
Re: D4D: Ready to Take Order
Can I buy a few of the blank PC cards from you, if so how much? Mark Schiff
By Mark KG5SPO <unixhams@...> · #2586 ·
D4D: 20m version needs more time
Folks, As I tested building 20m version one more time and I still found a little bit self-oscillation. As I said this is the nature of this architecture to use only one NE602 for both RX and TX. AA7EE
By Adam Rong · #2585 ·
Re: D4D: Ready to Take Order
Hello.I'm waiting for you to complete the tests, and I'm sure to order.Best regards.
By Furtuna Mircea · #2584 ·
Re: D4D: Ready to Take Order
Good news: 10130 can be pulled to around 10135.5 and it is good enough to cover 30m FT8 band. I will run more tests to make sure it is stable. Thanks, Adam
By Adam Rong · #2583 ·
Re: D4D: Ready to Take Order
I have found crystals of 10.140 and 10.130. I¡¯ll see if it is good to be pulled. If they cannot be pulled, 10.130 will be good for JS8CALL. Thanks, Adam
By Adam Rong · #2582 ·
Re: D4D: Ready to Take Order
Hello Adam. Which crystals (frequent) can be added? I'm especially interested in 10mhz (30 meter band).Mircea-YO9IOF
By Furtuna Mircea · #2581 ·
Re: DSB transceiver for Digital mode
Personally I will build a few. Please contact offline for the availability. Please add $25 for the build service. Thanks, Adam
By Adam Rong · #2580 ·
Re: DSB transceiver for Digital mode
Hi Adam...will there be any pre-assembled ones available? Thanks Bill...wa8bda
By wohlsson . · #2579 ·
Re: DSB transceiver for Digital mode
Ron, Pulling with NP0 capacitors will not generate too much stability issue. Normally inductors are drifting much. However, you are correct that 20m crystal is more unstable, but with the heating
By Adam Rong · #2578 ·
Re: D4D: Ready to Take Order
I will create a button and put on my web site this weekend but I am still on travel. I have received 5 orders so far and please continue to use rongxh@... to PayPal. Thanks, Adam -- Thanks, Adam
By Adam Rong · #2577 ·
Re: DSB transceiver for Digital mode
Adam, Thanks for your helpful, informative responses. So it sounds like the 40 meter version may be significantly more stable than the 20 meter version because of the lower frequency crystal.? In
By Ron Stone · #2576 ·
Re: D4D: Ready to Take Order
Do you have a link to your paypal?
By KF6EFG - John M · #2575 ·
Re: D4D: Ready to Take Order
Patrick, The beautiful black metal case is included in the price! Thanks, Adam
By Adam Rong · #2574 ·
Re: D4D: Ready to Take Order
Hello Adam Very interesting! Sorry if you still talk about it,? is there the case I have seen in the pics section? 73 Patrick F6GWE
By F6GWE · #2573 ·
D4D: Ready to Take Order
Folks, I start to take email order now. The introductory price is 39 USD for kit including shipping to worldwide. As in the introductory period, you will get audio cable options for free. The earliest
By Adam Rong · #2572 ·