开云体育

Hello
I have in my private rooms an old TPMC-10.
Today i want du update my programming - annything go's wrong, now the TPMC-10 bootscreen apears, then the Display turn Black with the mice cursor and the WLAN Led turns off.
Im not capable to go to the setup menu (hold touch after reset, press 1,2,3,4,1,2,3,4)
Have anyone of the "older" experts an idea?

Sorry for my bad englisch
Greetings FT

Did you try to take out the battery and return it back after 30 seconds?

Some of Crestron's touchpanels use Compact Flash cards to store the OS.
You could open it up and look to see if it's been disconnected/removed from
it's slot.

That was also one of the first TPs that you could load the firmware on
directly, instead of connecting over Cresnet or IP. A CF card in a PCMCIA
adatper, or a USB thumb drive, and browse to it within the setup. This
indicates to me that you could possibly boot off of a different device.
(Getting the boot image for that is another story)

Chris


On Mon, May 13, 2013 at 3:49 PM, guy_guy_1 <guy_guy_1@...> wrote:

**


Did you try to take out the battery and return it back after 30 seconds?


--- In Crestron@..., "feuertaenzer" <feuertaenzerone@...>
wrote:

Hello
I have in my private rooms an old TPMC-10.
Today i want du update my programming - annything go's wrong, now the

TPMC-10 bootscreen apears, then the Display turn Black with the mice cursor
and the WLAN Led turns off.

Im not capable to go to the setup menu (hold touch after reset, press

1,2,3,4,1,2,3,4)

Have anyone of the "older" experts an idea?

Sorry for my bad englisch
Greetings FT

[Non-text portions of this message have been removed]

I try something but no Results:

I dont use an akku - because he was dead
I dieassembled the TPMC and there is no Drive inside.
I put the oldest an newest firmware as zip, csz and the content extractet from the csz on a Stick and boot with it. (stick flashes shortly but no result)
I boot with holding the "4" button (viewsonic calls it "Dashboard") the the USB Disaster Recovery Mode Apears - Win 7 find a
"ViewSonic airpanel v110 smart display" and Win XP a "airpanel v210c wireless smart display" Win 7 dont need a driver - but the windows mobile device center find nothing - the Win XP has no drivers - and i find non in the web too.

I search tonight for an pcmcia cf adapter and try that tomorrow. I hope anyone of you has an idea to reaktive this touchpanel.


Greetings FT