开云体育

We have a requirement to integrate Sonos Beams into 6 bedrooms.
Setup is as follows:
Watch:
* Sony Bravia TV
* Local Apple TV plugged into the Bravia
* Head-end satellite sources
* Head-end Bluray
* Local HDMI wall input plugged into the Bravia
Listen:
* Sonos Beam for online content playback

In past scenario's where we have needed to switch to a line input on the Sonos Port, I've been able to get round the Crestron source switching by adding the Line-Input to Sonos Favorite's. This kludge does work as long as the user does not remove the Line-input from Favourits.

I was hoping to use a similar approach for the HDMI switching on the Beam but there is simply no way to add the TV to Favourites.?

The situation I have:
> User selects a video source, TV turns on and sound from the TV is played back through eARC on the Beam. Lovely jubbly.
> User then selects the Sonos Beam and plays music. Requirement is that the TV stays on so they can still view while listening to music. This works fine.
> User sees something interesting on TV and now wants to listen to the TV sound. There is no way to force the Beam back onto HDMI without having to use the Sonos App.

Has anyone had to deal with this situation? If so what work-arounds do you use?

slip

There is a discrete TV input IR command for the sonos sound bars.? It works perfectly and is the only reliable way I have been able to implement the above scenario.

These ones should work:?