开云体育

Sonance DSP series amps

adks1010 All Messages By This Member #211361 Quoting an upcoming job where these will be used. Plan is to use these as a switcher/amp/volume control.? Has anyone used these and is there anything to watch out for? There are downloads from the Sonance site for both IP and IR commands but no pre built modules. Has anyone developed a module for these? TIA.
bruce pearce #211362 开云体育 Hi? I have used these before . Great amps with ip control . The only problem is they take ages to turn on with an ip command . And while they are turning on they don't respond to any commands . From what I remember it's is about 2-3 minuets before it becomes operational from off? From bruce toggle quoted message Show quoted text On 17 Feb 2016, at 18:17, lucas.christy@... [Crestron] <Crestron@...> wrote: ? Quoting an upcoming job where these will be used. Plan is to use these as a switcher/amp/volume control.? Has anyone used these and is there anything to watch out for? There are downloads from the Sonance site for both IP and IR commands but no pre built modules. Has anyone developed a module for these? TIA.
lokikallas All Messages By This Member #211474 I've used these as replacements for the old 875's. ?We didn't use the preamp functions or the IP control, just the DSP for setup, and we triggered them on and off. ?They mostly work well, but I had a couple of frightening freakouts where the sound came out all crazy and distorted until I power cycled. ?Only happened 2 times, but enough to worry me. ?After that, we just disconnected the Enet feed from them during normal operation. ?The DSP setup was very similar to the Sonnex tool, with crossovers, and custom EQ for all of the Sonance speakers.

Previous Topic Next Topic