SIMPL calendar function

2023-03-14T21:47:59-07:00

Greetings! I used a TOD to turn on/off a boardroom monitor, but forgot about Sat/Sun. How can I turn on the monitor only M-F? Thanks in advance.

[email protected] All Messages By This Member #249102 Greetings! I used a TOD to turn on/off a boardroom monitor, but forgot about Sat/Sun. How can I turn on the monitor only M-F? Thanks in advance.
Phil Bridges All Messages By This Member #249103 A "day of week" Simpl+ module is about the easiest you could do. toggle quoted message Show quoted text On Sat, Feb 11, 2023 at 1:55 PM <dwiencek@...> wrote: Greetings! I used a TOD to turn on/off a boardroom monitor, but forgot about Sat/Sun. How can I turn on the monitor only M-F? Thanks in advance.
Dave H - Crestron True Blue Tech Support Engineer Since 2014 All Messages By This Member #249109 If you aren't a SIMPL+ programmer, use the "Event Scheduler 2 v1.2.0 (cm)" module found in SIMPL's Symbol Library / Module Database. F1 help file is quite detailed. Structure your .dat file as shown in the example so only M-F occur. Alternatively, use the <DAY_On/Off> and corresponding <DAY_On_Fb> signals to modify the .dat file at runtime.
Eric Luckart All Messages By This Member #249475 In the files section. Chip has a Day of the week module that is all in simpl. I have used it a few times and it works well.

开云体育