开云体育

Sensibo and crestron stopped working

[email protected] All Messages By This Member #256295 I am hoping that @jbasen will see this.?? I have been using your sensibo module for a few years and it has been working fantastically well. ? Today the module has started erroring.?? Seems to be an SSL issue. ? The error is: ? 00:20:29.047: [Console Data] : Sensibo_Air - Refresh - Error Sending Device Command: Crestron.SimplSharp.Net.Https.HttpsException: Peer certificate cannot be authenticated with given CA certificates 00:20:29.047: [Console Data] : ? ?at Crestron.SimplSharp.Net.Https.HttpsClient.ProcessInternalError(HttpsClientResponse response) 00:20:29.047: [Console Data] : ? ?at Crestron.SimplSharp.Net.Https.HttpsClient.d(HttpsClientRequest A_0, Boolean A_1) 00:20:29.047: [Console Data] : ? ?at Crestron.SimplSharp.Net.Https.HttpsClient.TryDispatch(HttpsClientRequest aRequest) 00:20:29.047: [Console Data] : ? ?at Crestron.SimplSharp.Net.Https.HttpsClient.Dispatch(HttpsClientRequest aRequest) 00:20:29.047: [Console Data] : ? ?at Sensibo_Air_Integration.Sensibo_Air.Refresh() 00:20:29.047: [Console Data] : ? ?at Sensibo_Air_Integration.Sensibo_Air.Initialize(String Device_ID, String API_Key, Int16 Default_Target_Temperature, String Default_Temperature_Unit, Int16 Debug) 00:20:29.047: [Console Data] : ? ?at UserModule_SENSIBO_AIR_V1_6.UserModuleClass_SENSIBO_AIR_V1_6.INITIALIZE_OnPush_0(Object __EventInfo__) 00:20:29.047: [Console Data] : ? ?at Amib.Threading.Internal.WorkItem.o() 00:20:29.047: [Console Data] : ? ?at Amib.Threading.Internal.WorkItem.Execute() 00:20:29.047: [Console Data] : ? ?at Amib.Threading.SmartThreadPool.e(WorkItem A_0 ? Thanks
jbasen All Messages By This Member #256297 开云体育 I'm glad you've found the Sensibo module helpful.? Unfortunately, I don't know that I'm going to be helpful solving this problem.? I'm just not well versed in certificates and how Crestron handles them on a processor.?? I have a NAS drive where windows complains about the drive's certificate and the manufacturer can't even give me a straight answer on solving the problem. My one thought would be to update the firmware on the processor to see if that would update the certificate.? However, I believe there are other people on the forum who know much more about this topic than I do. I wish I could be of more help Jay On 3/25/2025 12:40 AM, gbnet.hifi via groups.io wrote: toggle quoted message Show quoted text I am hoping that @jbasen will see this.?? I have been using your sensibo module for a few years and it has been working fantastically well. ? Today the module has started erroring.?? Seems to be an SSL issue. ? The error is: ? 00:20:29.047: [Console Data] : Sensibo_Air - Refresh - Error Sending Device Command: Crestron.SimplSharp.Net.Https.HttpsException: Peer certificate cannot be authenticated with given CA certificates 00:20:29.047: [Console Data] : ? ?at Crestron.SimplSharp.Net.Https.HttpsClient.ProcessInternalError(HttpsClientResponse response) 00:20:29.047: [Console Data] : ? ?at Crestron.SimplSharp.Net.Https.HttpsClient.d(HttpsClientRequest A_0, Boolean A_1) 00:20:29.047: [Console Data] : ? ?at Crestron.SimplSharp.Net.Https.HttpsClient.TryDispatch(HttpsClientRequest aRequest) 00:20:29.047: [Console Data] : ? ?at Crestron.SimplSharp.Net.Https.HttpsClient.Dispatch(HttpsClientRequest aRequest) 00:20:29.047: [Console Data] : ? ?at Sensibo_Air_Integration.Sensibo_Air.Refresh() 00:20:29.047: [Console Data] : ? ?at Sensibo_Air_Integration.Sensibo_Air.Initialize(String Device_ID, String API_Key, Int16 Default_Target_Temperature, String Default_Temperature_Unit, Int16 Debug) 00:20:29.047: [Console Data] : ? ?at UserModule_SENSIBO_AIR_V1_6.UserModuleClass_SENSIBO_AIR_V1_6.INITIALIZE_OnPush_0(Object __EventInfo__) 00:20:29.047: [Console Data] : ? ?at Amib.Threading.Internal.WorkItem.o() 00:20:29.047: [Console Data] : ? ?at Amib.Threading.Internal.WorkItem.Execute() 00:20:29.047: [Console Data] : ? ?at Amib.Threading.SmartThreadPool.e(WorkItem A_0 ? Thanks
ckangis All Messages By This Member #256299 I'm well above my pay-grade here, so this is just a possible musing... ? Did you upgrade to some of the most recent FW (I'm assuming this is a CP4)?? There's some issues with HomeKit, DSC, etc. that these newer FWs break related I think to certificate management. I don't use these interfaces but I'm sure if I updated my CP4's it would break something that they haven't identified, and maybe this is your issue... I've been staying on the "cp4_2.8003.00056.01.puf", as it seems to be reasonably stable...and you know what 'reasonably' means...:) ? Just throwing this out as a possibility...
jbasen All Messages By This Member #256305 开云体育 Thanks for chiming in.? Good idea. Jay On 3/25/2025 7:49 AM, ckangis via groups.io wrote: toggle quoted message Show quoted text I'm well above my pay-grade here, so this is just a possible musing... ? Did you upgrade to some of the most recent FW (I'm assuming this is a CP4)?? There's some issues with HomeKit, DSC, etc. that these newer FWs break related I think to certificate management. I don't use these interfaces but I'm sure if I updated my CP4's it would break something that they haven't identified, and maybe this is your issue... I've been staying on the "cp4_2.8003.00056.01.puf", as it seems to be reasonably stable...and you know what 'reasonably' means...:) ? Just throwing this out as a possibility...
[email protected] All Messages By This Member #256306 开云体育 Thanks for the thoughts. ? Especially thank you to jbasen for your thoughts. ? The strange thing is that I have updated nothing. ? I haven’t touched the code or firmware in the cp3 ( yes not a cp4). The certificate on the cp3 is self signed and has an expiry date of 2074. ? I am wondering if the sensibo has updated its firmware automatically and has an issue with the self signed crestron certificate.? I’m also trying to work out if the error message is a result of the sensibo not liking the certificate in the crestron cp3 or if it’s a result of the crestron cp3 not liking the certificate on the sensibo. ?? toggle quoted message Show quoted text On 26 Mar 2025, at 4:39?am, jbasen via groups.io <jay.m.basen@...> wrote: ? Thanks for chiming in.? Good idea. Jay On 3/25/2025 7:49 AM, ckangis via groups.io wrote: I'm well above my pay-grade here, so this is just a possible musing... ? Did you upgrade to some of the most recent FW (I'm assuming this is a CP4)?? There's some issues with HomeKit, DSC, etc. that these newer FWs break related I think to certificate management. I don't use these interfaces but I'm sure if I updated my CP4's it would break something that they haven't identified, and maybe this is your issue... I've been staying on the "cp4_2.8003.00056.01.puf", as it seems to be reasonably stable...and you know what 'reasonably' means...:) ? Just throwing this out as a possibility...
jbasen All Messages By This Member #256307 开云体育 As is always the case, you are the first person to report this issue.?. I wish I could help more but certificates are just something that I fully admit I don't have the necessary knowledge to help with debugging.? I also don't have any contacts at Sensibo that I can pull from to provide assistance.? Sensibo does have a support center website ().? When I was writing the integration code I had to use them periodically.? I can't say they were great but it might be worth a try to send them a message.? At least they might be able to tell you if they changed anything on their end with a firmware update.? Hope this helps, at least a little. Jay On 3/25/2025 4:38 PM, gbnet.hifi via groups.io wrote: toggle quoted message Show quoted text Thanks for the thoughts. ? Especially thank you to jbasen for your thoughts. ? The strange thing is that I have updated nothing. ? I haven’t touched the code or firmware in the cp3 ( yes not a cp4). The certificate on the cp3 is self signed and has an expiry date of 2074. ? I am wondering if the sensibo has updated its firmware automatically and has an issue with the self signed crestron certificate.? I’m also trying to work out if the error message is a result of the sensibo not liking the certificate in the crestron cp3 or if it’s a result of the crestron cp3 not liking the certificate on the sensibo. ?? On 26 Mar 2025, at 4:39?am, jbasen via groups.io <jay.m.basen@...> wrote: ? Thanks for chiming in.? Good idea. Jay On 3/25/2025 7:49 AM, ckangis via groups.io wrote: I'm well above my pay-grade here, so this is just a possible musing... ? Did you upgrade to some of the most recent FW (I'm assuming this is a CP4)?? There's some issues with HomeKit, DSC, etc. that these newer FWs break related I think to certificate management. I don't use these interfaces but I'm sure if I updated my CP4's it would break something that they haven't identified, and maybe this is your issue... I've been staying on the "cp4_2.8003.00056.01.puf", as it seems to be reasonably stable...and you know what 'reasonably' means...:) ? Just throwing this out as a possibility...
jbasen All Messages By This Member #256308 开云体育 Let me add that I've just started working with a product that will be an alternative to the Sensibo.? I'm in the process of talking to the company about some features and waiting for some product updates so it isn't anything I can discuss at this time.? However, I just wanted to throw this out in case it turns out that the integration is terminally broken.? I'm working towards have an article out in a few months. Thanks Jay On 3/25/2025 4:49 PM, jbasen via groups.io wrote: toggle quoted message Show quoted text As is always the case, you are the first person to report this issue.?. I wish I could help more but certificates are just something that I fully admit I don't have the necessary knowledge to help with debugging.? I also don't have any contacts at Sensibo that I can pull from to provide assistance.? Sensibo does have a support center website ().? When I was writing the integration code I had to use them periodically.? I can't say they were great but it might be worth a try to send them a message.? At least they might be able to tell you if they changed anything on their end with a firmware update.? Hope this helps, at least a little. Jay On 3/25/2025 4:38 PM, gbnet.hifi via groups.io wrote: Thanks for the thoughts. ? Especially thank you to jbasen for your thoughts. ? The strange thing is that I have updated nothing. ? I haven’t touched the code or firmware in the cp3 ( yes not a cp4). The certificate on the cp3 is self signed and has an expiry date of 2074. ? I am wondering if the sensibo has updated its firmware automatically and has an issue with the self signed crestron certificate.? I’m also trying to work out if the error message is a result of the sensibo not liking the certificate in the crestron cp3 or if it’s a result of the crestron cp3 not liking the certificate on the sensibo. ?? On 26 Mar 2025, at 4:39?am, jbasen via groups.io <jay.m.basen@...> wrote: ? Thanks for chiming in.? Good idea. Jay On 3/25/2025 7:49 AM, ckangis via groups.io wrote: I'm well above my pay-grade here, so this is just a possible musing... ? Did you upgrade to some of the most recent FW (I'm assuming this is a CP4)?? There's some issues with HomeKit, DSC, etc. that these newer FWs break related I think to certificate management. I don't use these interfaces but I'm sure if I updated my CP4's it would break something that they haven't identified, and maybe this is your issue... I've been staying on the "cp4_2.8003.00056.01.puf", as it seems to be reasonably stable...and you know what 'reasonably' means...:) ? Just throwing this out as a possibility...

Previous Topic Next Topic