开云体育

samsung digital display QE50T RS232 protocol

#crestron

[email protected] All Messages By This Member #238382 Does anyone have information on? the serial protocol for this device. I'm unable to find anything. i'm tring a bunch of crestron modules and no luck yet.?
Matt Jones All Messages By This Member #238383 We had no luck getting QE Series to work through RS232. We also didnt find any documentation that indicated that RS232 works on these models. Hopefully someone here says otherwise.
Jeremy Weatherford All Messages By This Member #238387 I haven't used a QE50T, but it's a commercial model, lists RS232 on the spec sheet, and has a 3.5mm RS232 input that says it supports MDC protocol... seems pretty clear cut to me. toggle quoted message Show quoted text On Fri, Nov 20, 2020 at 6:10 PM jones.matt94 via <jones.matt94=[email protected]> wrote: We had no luck getting QE Series to work through RS232. We also didnt find any documentation that indicated that RS232 works on these models. Hopefully someone here says otherwise.
Lincoln King-Cliby All Messages By This Member #238388 开云体育 Not sure about the 50T specifically but done lots of QEs and they all speak MDC. ? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial Market Director Sr. Systems Architect \| Crestron Certified Master Programmer (Diamond) ControlWorks Consulting, LLC Direct: (+1)440.771.4807 \| Cleveland: (+1)440.449.1100? \| Boston: (+1)508.695.0188 \| DC: (+1)202.381.9070? \| Fax: (+1)440.449.1106 Crestron Services Provider \| Biamp Authorized Independent Programmers \| Extron Qualified Independent Programmer ? toggle quoted message Show quoted text From: [email protected] <[email protected]> On Behalf Of Jeremy Weatherford Sent: Saturday, November 21, 2020 11:37 AM To: [email protected] Subject: Re: [crestron] samsung digital display QE50T RS232 protocol #crestron ? I haven't used a QE50T, but it's a commercial model, lists RS232 on the spec sheet, and has a 3.5mm RS232 input that says it supports MDC protocol... seems pretty clear cut to me. ? On Fri, Nov 20, 2020 at 6:10 PM jones.matt94 via <jones.matt94=[email protected]> wrote: We had no luck getting QE Series to work through RS232. We also didnt find any documentation that indicated that RS232 works on these models. Hopefully someone here says otherwise.
Audvizer Member Profile All Messages By This Member #238395 Just a thought.... have you set the ID on the TV according to the command you are sending? Also is baud rate correct on your two way serial??

Previous Topic Next Topic