开云体育

Hi All

Im on site and trying to get this projector to work
The manual gives me an example of
ky <keyname>[CR]

ky for key commands or op for operation commands
so im sending POWOFF&#92;x0a&#92;x0d
i get a response but not the right one and the projector refuses to work
The manual im reading from is


any ideas would be great

Bruce

I posted a module for the LS-3/5 in the files section a few years back.
Try that.

There is a space between ky and the command, then a period between the command and the function. Then a character return (&#92;r) after each command.

Power OFF = ky pow.off
Power ON = ky pow.on
Input 1 = ky src.1
Aspect = ky asp.sw

then use &#92;r in the delimiter area

-Kevin Keenan

On Apr 23, 2012, at 10:49 AM, pearce.bruce wrote:

Hi All

Im on site and trying to get this projector to work
The manual gives me an example of
ky <keyname>[CR]

ky for key commands or op for operation commands
so im sending POWOFF&#92;x0a&#92;x0d
i get a response but not the right one and the projector refuses to work
The manual im reading from is


any ideas would be great

Bruce




TODAY(Beta) � Powered by Yahoo!
Iran says it has copied U.S. drone
Privacy Policy

[Non-text portions of this message have been removed]