Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
Programming advise
|
I recently purchased a used STS-1500C & ST-CP controller. Over the
weekend I 'learned' the IR codes for my current remotes, modifying similar devices from the Crestron db. Then using VT Pro-e, I generated a system. I did not load the system into the controller or touchscreen. I went into customize the setup and found that the touchscreen design only included a very few buttons. 1. Is this normal or should pages & buttons be created for all the assigned functions on a specific device? 2. Are the samples screens available for the STS-1500C? 3. Do others upload their screen designs or is this were the professionls really earn their pay? thanks in advance $ |
|
Mike Braithwaite
Congrats on your new systems, I have a few comments that may assist you.
toggle quoted message
Show quoted text
#1, most users of the touch screens do not want all the functions that may be available on the standard remote control. Most of the extra buttons on remotes are for setup, or once a year setup details. The idea of a touch screen is to simplify the controls, and take away all the extra buttons that are not needed on a day by day basis. However some users do want every last control that was available on the standard remote. It is part of a programmers job to determine what the end user wants. #2, Yes, on crestron ftp site, www.crestron.com you will find a few sample programs for the 1500. #3, Yes, and no, most dealers will not give out their designs, however all touch panels that crestron displays during a trade show (i.e. cedia) are available for download on the ftp site. I hope this help, good luck! Mike Braithwaite -----Original Message-----
From: gtdollar@... [mailto:gtdollar@...] Sent: Wednesday, July 05, 2000 4:09 PM To: Crestron@... Subject: [Crestron] Programming advise I recently purchased a used STS-1500C & ST-CP controller. Over the weekend I 'learned' the IR codes for my current remotes, modifying similar devices from the Crestron db. Then using VT Pro-e, I generated a system. I did not load the system into the controller or touchscreen. I went into customize the setup and found that the touchscreen design only included a very few buttons. 1. Is this normal or should pages & buttons be created for all the assigned functions on a specific device? 2. Are the samples screens available for the STS-1500C? 3. Do others upload their screen designs or is this were the professionls really earn their pay? thanks in advance $ ------------------------------------------------------------------------ Where do sports heroes like Derek Jeter, Mia Hamm, Vince Carter and Peyton Manning hang out? Where else? Click now and find em all here! ------------------------------------------------------------------------ |
|
Shawn McCormick
开云体育5.00.50
?
or maybe that's? 50.05.0.? I can never
remember where to put the periods. (Grin)
?
Shawn
|
|
Mike Braithwaite
toggle quoted message
Show quoted text
|
|
Mike Braithwaite
开云体育Hello,
???????????
That is the latest released firmware for the
ST1500.????? 5.008.0
?
Mike
Braithwaite
?
|
to navigate to use esc to dismiss