¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Problem in mycrestron ddn


 

Hi, Problem in mycrestron ddns :?
Module (Crestron Name resolution Interface) in control system work well ; ip register ok , modules status connected and no error , but when i test the domain in??:


Results - Client Connection: Failure (ConnectionRefused)



 

It sounds like you don't have all the ports open at the location you are trying to gain remote access from.

You need to open http port 80, CIP port 41794, and port 41795, pointed at the Crestron processor,?? on the router from where you are trying to gain access from.??? To test if the ports are open, you can use the website?

I'm new to setting up remote access and I just recently got it working. ?I had the same error you did and the fix was opening up?(and verifying) those?ports on my router.



On Friday, February 5, 2016 5:07 AM, "elwatchout@... [Crestron]" wrote:


?
Hi, Problem in mycrestron ddns :?
Module (Crestron Name resolution Interface) in control system work well ; ip register ok , modules status connected and no error , but when i test the domain in??:

Results - Client Connection: Failure (ConnectionRefused)




 

You can change from port 80 if you want as well but ports must be open in the router and pointed to your processor address. If using a 3 series, you don't need the module.