开云体育

Hey all, hoping for some help. I'm using an Extron DSP Group control module from here, and I'm using 4 of them to control 4 different volume groups. My issue is that if I do Volume Up or Down on one of them, the volume feedback for the all 4 adjust together.
I called Crestron and they said they couldn't help, thought the modules would need 'Unique Modifiers' but couldn't help with that.
I even tried creating 4 separate modules with different names, but the same thing happens.

In my mind I expected that since each module has it's own place in Simpl, ie S-7.1.1, S-7.2.1. that each one would be independent, but tech support says no, they act as one..

If anyone can help out it would be great, I'm in a bit of a jam time wise.

Random Guy,
Your best bet would be to get on the discord channel and ask for help there. My guess here would be something in the coding is causing this issue but without seeing the program and how the signals are ran, it wouldn't be very likely we could just give you an answer.

Hi Random Guy,

are you using the old "DMP 64/128" or the new "DMP 64/128 Plus"?
If I remember right there are a few modules in the files section, I did some work on this almost 3 years ago.
When using the module that I modified and uploaded, please have a look at the example. It sets the DMP to verbose mode 3, which is important to make the module work properly.
In addition, each module needs to be polled upon startup before usage, this will initialize the values and feedback.

Questions welcome

Crestronfreak55.