Keyboard Shortcuts
Likes
Search
Occupancy/motion sensor
|
I am trying to replace a ceiling mounted BEG automation PD11-KNX-FLAT bus occupancy sensor with something compatible with Crestron. ?Problem is it fits into a roughly 2" diameter hole in a concrete ceiling (no modification to structure allowed). ?I am having no luck finding something that would fit. ?Any reference to a compatible product would be greatly appreciated.
TIA Kol |
开云体育How big a sensing area, what type of connectivity, and how important are aesthetics? ? You could put a GLS-ODT-C-CN in a surface pancake box using Cresnet if that’s an option and aesthetics aren’t critical. ? I’ve used Visonic SPY-series PIRs around my house for really unobtrusive detection (exposed bit is about the size of a quarter) and mount it on a piece of polycarbonate or even wood cut to match the hole. 12VDC power and dry contact output (or you can tie one side of the dry contact to 12V and get a 12V wet output requiring only 3 conductors. ? Beware with the SPY they really don’t like over voltage… ? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D ? From: [email protected] <[email protected]> On Behalf Of
MSTC
Sent: Friday, January 8, 2021 11:41 AM To: [email protected] Subject: [crestron] Occupancy/motion sensor ? I am trying to replace a ceiling mounted BEG automation PD11-KNX-FLAT bus occupancy sensor with something compatible with Crestron. ?Problem is it fits into a roughly 2" diameter hole in a concrete ceiling (no modification to structure
allowed). ?I am having no luck finding something that would fit. ?Any reference to a compatible product would be greatly appreciated. |
|
Phil Millross
开云体育Hey All,?This side of the pond a company call faradite make a great little unit? Again working with constant 24v psu and digital IO ??? On 9 Jan 2021, at 10:37, harryblackman@... wrote:
|
开云体育Thanks Nathan ? From: <[email protected]> on behalf of Nathan Durfee <nathan@...> ? look into the basalte auro (?not sure of hte size, but i know its very small. Also designed for residential, so not sure how your application is. Does work with crestron? |
开云体育Thanks Lincoln ? From: <[email protected]> on behalf of Lincoln King-Cliby <lincoln@...> ? How big a sensing area, what type of connectivity, and how important are aesthetics? ? You could put a GLS-ODT-C-CN in a surface pancake box using Cresnet if that’s an option and aesthetics aren’t critical. ? I’ve used Visonic SPY-series PIRs around my house for really unobtrusive detection (exposed bit is about the size of a quarter) and mount it on a piece of polycarbonate or even wood cut to match the hole. 12VDC power and dry contact output (or you can tie one side of the dry contact to 12V and get a 12V wet output requiring only 3 conductors. ? Beware with the SPY they really don’t like over voltage… ? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D ? From: [email protected] <[email protected]> On Behalf Of MSTC
Sent: Friday, January 8, 2021 11:41 AM To: [email protected] Subject: [crestron] Occupancy/motion sensor ? I am trying to replace a ceiling mounted BEG automation PD11-KNX-FLAT bus occupancy sensor with something compatible with Crestron. ?Problem is it fits into a roughly 2" diameter hole in a concrete ceiling (no modification to structure allowed). ?I am having no luck finding something that would fit. ?Any reference to a compatible product would be greatly appreciated. |
开云体育Thanks all.? The Faradite unit looks really nice, size wise, and I also figured out’ there is a Crestron unit GLS-OICLCL-C-CN that for some reason I didn’t find the first time around but it is a bit small at 1.5” diameter.? I am going to give them a try and see if I can fab up a nice bezel out of stainless or aluminum so they fit properly. ? From: <[email protected]> on behalf of <david@...> ? Have a look at this |