I am having a hell of a time trying to control some insteon lights. I attempted to use the lighting and thermostat module in the files section but it does not seem to compile in a 3 series program.

Is there a better way to control Insteon lights with Crestron. I? have read that some people use the Hub or an ICY but have not seen any modules.?

I have my CP3 talk to an ISY through REST commands. This allows me to control Insteon devices and scenes. I am also able to get some status feedback via query commands. Not very pretty, but it works sufficiently well in my modest setup.

开云体育

Do you have a file that I can use as an example?

Michael and Julio;

Hmm, I could try to create a smw file with an extract of the ISY content.
Is there a way you can maybe message me your email addresses to send it to?

Again, fair warning, it is not pretty, but rather brute force, in particular the feedback portion: I have assigned variables to each scene in the ISY. The Crestron then parses the feedback gibberish the ISY sends when queried :-)

My email is Julio@....

Thank you for letting me take a look.

Im still trying to get it working with the SmartLinc serial interface but its not working for me.

@Julio - email sent. Hope you find it helpful.

Other things I found I didn't know about! There is AMX code running around to program Insteon:

https://web.archive.org/web/20081012172925/http://www.smarthome.com/321601.html

https://web.archive.org/web/20151204232334/http://www.smarthome.com/artemis-v2-64-device-insteon-controller.html

https://web.archive.org/web/20081026115729/http://www.smarthome.com/321602/Artemis-V2-64-Device-INSTEON-Controller-Software-Only-ASV02064/p.aspx

https://web.archive.org/web/20121110005743/http://www.smarthome.com/manuals/321600.pdf

Sorry to reply to a dead post. Just trying to add this stuff so if someone looks for it, it's out there!


If you use a 1st gen Insteon hub, you can issue commands thru the network.
If you have a Serial PLM, you can communicate with a Processor's COM port.

I have not done this myself, don't have the patience to set it up!

Sorry to reply to a dead post. Just trying to add this stuff so if someone looks for it, it's out there!



If you use a 1st gen Insteon hub, you can issue commands thru the network.
If you have a Serial PLM, you can communicate with a Processor's COM port.

I have not done this myself, don't have the patience to set it up!