开云体育

Help to get new 2 series firmware released

Witmarquzot Dyrjuv All Messages By This Member #183802 Crestron is currently sitting on a firmware update that solves the ethernet socket problems that causes restarts. Unfortunately they have not deemed it important enough to release to the public. I have a copy of it after making a stink to get the problem fixed. This stabilizes the ethernet on all 2 series processors, allowing it to be used as intended. Ask your rep for FW: 4.0007.0022+, 4.0007.0022 is the first firmware with the known fix implemented. Normally I would not resort to this, but as it will help many of the ethernet control problems, i figure you all should have a chance to try it.
BruteForceIsUnderRated All Messages By This Member #183988 I doubt its a case of not being important enough. It is more likely that there are higher priorities being pushed through the QC department. On Wed, Aug 14, 2013 at 11:08 AM, Witmarquzot Dyrjuv < witmarquzotix@...> wrote: ** Crestron is currently sitting on a firmware update that solves the ethernet socket problems that causes restarts. Unfortunately they have not deemed it important enough to release to the public. I have a copy of it after making a stink to get the problem fixed. This stabilizes the ethernet on all 2 series processors, allowing it to be used as intended. Ask your rep for FW: 4.0007.0022+, 4.0007.0022 is the first firmware with the known fix implemented. Normally I would not resort to this, but as it will help many of the ethernet control problems, i figure you all should have a chance to try it. [Non-text portions of this message have been removed]
Witmarquzot Dyrjuv All Messages By This Member #183993 6 months is a long time in QE for a single issue dealing with an Ethernet driver. toggle quoted message Show quoted text On Fri, Aug 16, 2013 at 12:32 PM, crestronpro <crestronpro@...> wrote: I doubt its a case of not being important enough. It is more likely that there are higher priorities being pushed through the QC department. On Wed, Aug 14, 2013 at 11:08 AM, Witmarquzot Dyrjuv < witmarquzotix@...> wrote: ** Crestron is currently sitting on a firmware update that solves the ethernet socket problems that causes restarts. Unfortunately they have not deemed it important enough to release to the public. I have a copy of it after making a stink to get the problem fixed. This stabilizes the ethernet on all 2 series processors, allowing it to be used as intended. Ask your rep for FW: 4.0007.0022+, 4.0007.0022 is the first firmware with the known fix implemented. Normally I would not resort to this, but as it will help many of the ethernet control problems, i figure you all should have a chance to try it. ------------------------------------ Check out the Files area for useful modules, documents, and drivers. A contact list of Crestron dealers and programmers can be found in the Database area. Yahoo! Groups Links
PD All Messages By This Member #184003 Crestron is currently sitting on a firmware update that solves the ethernet socket problems that causes restarts. Unfortunately they What ethernet socket problem is this? Paul
Witmarquzot Dyrjuv All Messages By This Member #184011 --- In Crestron@..., "sfbusfbu" <pade@...> wrote: Crestron is currently sitting on a firmware update that solves the ethernet socket problems that causes restarts. Unfortunately they What ethernet socket problem is this? Paul See error earlier in the day on PRO3 random reboot.
Chip #184021 I didn't recall seeing anything about new 2 series firmware in the post about the PRO3 reboots...? - Chip toggle quoted message Show quoted text --- In Crestron@..., "Witmarquzot Dyrjuv" <witmarquzotix@...> wrote: --- In Crestron@..., "sfbusfbu" <pade@> wrote: Crestron is currently sitting on a firmware update that solves the ethernet socket problems that causes restarts. Unfortunately they What ethernet socket problem is this? Paul See error earlier in the day on PRO3 random reboot.
fooguy89 All Messages By This Member #184423 You're assuming that's the only issue. Bad assumption. toggle quoted message Show quoted text --- In Crestron@..., Tyler Durrant <witmarquzotix@...> wrote: 6 months is a long time in QE for a single issue dealing with an Ethernet driver. On Fri, Aug 16, 2013 at 12:32 PM, crestronpro <crestronpro@...> wrote: I doubt its a case of not being important enough. It is more likely that there are higher priorities being pushed through the QC department. On Wed, Aug 14, 2013 at 11:08 AM, Witmarquzot Dyrjuv < witmarquzotix@...> wrote: ** Crestron is currently sitting on a firmware update that solves the ethernet socket problems that causes restarts. Unfortunately they have not deemed it important enough to release to the public. I have a copy of it after making a stink to get the problem fixed. This stabilizes the ethernet on all 2 series processors, allowing it to be used as intended. Ask your rep for FW: 4.0007.0022+, 4.0007.0022 is the first firmware with the known fix implemented. Normally I would not resort to this, but as it will help many of the ethernet control problems, i figure you all should have a chance to try it. ------------------------------------ Check out the Files area for useful modules, documents, and drivers. A contact list of Crestron dealers and programmers can be found in the Database area. Yahoo! Groups Links

Previous Topic Next Topic