¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Topics

Extron DMP 128 crestron module

 

Dear Team,

Can anyone share Crestron module for Extron DMP 128.

Regards,

V.Sudhakar udhayan
 

On Sat, Jan 30, 2021 at 10:46 PM, Sudhakar Udhayan wrote:
Extron DMP 128
Why not just write one or use an SIO? This instruction set is about as basic as they get..
?
--
?
Crestron Service Provider - TBD Enterprises Inc.
 

Hi,

There are some modules in the file section of this forum.
I modified and uploaded files for DMP 128 and DMP 128 Plus.
Follow the instructions in the help file, any questions and feedback is welcome.

Regards
Crestronfreak55
 

Hi Crestronfreak55,
Good Day!!!
Thank you very much for the modules you have created. By the way i am newbie in this field, i had CTI-P 101 long time back (2014) since then i haven't touch any programming. I used to handle full Site Projects from scratch to handing over.?
Since our programmer left the company and went to his home country for good, i'm the one who needs to handle crestron programming.
almost done with it like controlling Projector Screen, projector Lift, projector, Stage Curtain, Extron IN1608 except volume control of DMP128 plus. All i need to do is to control Pre-Mix Gain and Mute of Channel 1 and 2 of DMP 128 Plus. I used your module Extron DMP 128 Plus Input Gain-Pre mixer gain. Two of those, Left and Right Channel.
I can mute/unmute but i cant control the faders up and down. Kindly support me on this one please.
Thanks you.

Sincerely,
Rogelio L. Lobrio
 

Hi Rogelio,

Please have a look at the example that is part of the zip file.
To make the module work, a few things need to be ensured:
- Verbose mode 3 needs to be enabled
- Before controlling the volume, the value needs to be polled once

BTW: When controlling a stereo input, I suggest to use a group. Configure the group(s) in the DSP Configurator.
By doing so you can make sure that left and right channel always have the same level.

Questions or feedback welcome

Crestronfreak55
 

Dear Rogelio,

Do you have DataViewer software of extron with you? if not kindly download the Dataviewer software from extron website. once you installed the dataviewer setup there you can mention the required module and you will get the right command code for controlling the module.

Regards,

Sudhakar udhayan
Regards,

V.Sudhakar udhayan



On Thu, Feb 18, 2021 at 3:22 PM rogeliolobrio via <rogeliolobrio=[email protected]> wrote:
Hi Crestronfreak55,
Good Day!!!
Thank you very much for the modules you have created. By the way i am newbie in this field, i had CTI-P 101 long time back (2014) since then i haven't touch any programming. I used to handle full Site Projects from scratch to handing over.?
Since our programmer left the company and went to his home country for good, i'm the one who needs to handle crestron programming.
almost done with it like controlling Projector Screen, projector Lift, projector, Stage Curtain, Extron IN1608 except volume control of DMP128 plus. All i need to do is to control Pre-Mix Gain and Mute of Channel 1 and 2 of DMP 128 Plus. I used your module Extron DMP 128 Plus Input Gain-Pre mixer gain. Two of those, Left and Right Channel.
I can mute/unmute but i cant control the faders up and down. Kindly support me on this one please.
Thanks you.

Sincerely,
Rogelio L. Lobrio
 

Hi?Crestronfreak55,

Noted.?Thank you.

- Verbose mode 3 needs to be enabled
- Before controlling the volume, the value needs to be polled once

BTW: When controlling a stereo input, I suggest to use a group. Configure the group(s) in the DSP Configurator.
By doing so you can make sure that left and right channel always have the same level.

Regards,
Rogelio



On Friday, February 19, 2021, 12:53 AM, crestronfreak55 via groups.io <crestronfreak55@...> wrote:

Hi Rogelio,

Please have a look at the example that is part of the zip file.
To make the module work, a few things need to be ensured:
- Verbose mode 3 needs to be enabled
- Before controlling the volume, the value needs to be polled once

BTW: When controlling a stereo input, I suggest to use a group. Configure the group(s) in the DSP Configurator.
By doing so you can make sure that left and right channel always have the same level.

Questions or feedback welcome

Crestronfreak55

 

Hi?Sudhakar,

Will download DataViewer. Many Thanks.

Regards,
Rogelio





On Friday, February 19, 2021, 8:44 PM, Sudhakar Udhayan <sudhakar.udhayan@...> wrote:

Dear Rogelio,

Do you have DataViewer software of extron with you? if not kindly download the Dataviewer software from extron website. once you installed the dataviewer setup there you can mention the required module and you will get the right command code for controlling the module.

Regards,

Sudhakar udhayan
Regards,

V.Sudhakar udhayan



On Thu, Feb 18, 2021 at 3:22 PM rogeliolobrio via <rogeliolobrio=[email protected]> wrote:
Hi Crestronfreak55,
Good Day!!!
Thank you very much for the modules you have created. By the way i am newbie in this field, i had CTI-P 101 long time back (2014) since then i haven't touch any programming. I used to handle full Site Projects from scratch to handing over.?
Since our programmer left the company and went to his home country for good, i'm the one who needs to handle crestron programming.
almost done with it like controlling Projector Screen, projector Lift, projector, Stage Curtain, Extron IN1608 except volume control of DMP128 plus. All i need to do is to control Pre-Mix Gain and Mute of Channel 1 and 2 of DMP 128 Plus. I used your module Extron DMP 128 Plus Input Gain-Pre mixer gain. Two of those, Left and Right Channel.
I can mute/unmute but i cant control the faders up and down. Kindly support me on this one please.
Thanks you.

Sincerely,
Rogelio L. Lobrio

1 - 8 of 8