开云体育

I need to convert the HDMI output of a DM-RMC-200-C to VGA to feed an old video mixing board and Im pretty sure I'll run into problems unless I get an active DVI-D to VGA converter like this:



From what I can tell I need to adapt the HDMI out to DVI-D then convert it to VGA. Is this correct or is there another way?

Jeff:

Going HDMI to DVI-D is just a passive cable. Yes, you need an active
device to change from digital (DVI-D) to analog (VGA). If the source is
copy protected (i.e. blu-ray), then the VGA output will either be
nothing or down converted to something like 480P.

An alternate device, HDMI to VGA, is from Altinex:



Mike
--- In Crestron@..., "Jeff Cunningham" wrote:

I need to convert the HDMI output of a DM-RMC-200-C to VGA to feed an

old video mixing board and Im pretty sure I'll run into problems unless
I get an active DVI-D to VGA converter like this:

From what I can tell I need to adapt the HDMI out to DVI-D then

convert it to VGA. Is this correct or is there another way?

You might take a look at HD Fury 3, see hdfury dot com. The 3 version does
the conversion nicely on things like blu-ray players and apple TV, it also
yields analog audio.


_____

From: Crestron@... [mailto:Crestron@...] On Behalf
Of Mike
Sent: Monday, June 17, 2013 9:50 AM
To: Crestron@...
Subject: [Crestron] Re: DM-RMC-200-C - Converting HDMI output to VGA




Jeff:

Going HDMI to DVI-D is just a passive cable. Yes, you need an active
device to change from digital (DVI-D) to analog (VGA). If the source is
copy protected (i.e. blu-ray), then the VGA output will either be
nothing or down converted to something like 480P.

An alternate device, HDMI to VGA, is from Altinex:


<> &sbc=1

Mike
--- In Crestron@... <mailto:Crestron%40yahoogroups.com> , "Jeff
Cunningham" wrote:

I need to convert the HDMI output of a DM-RMC-200-C to VGA to feed an

old video mixing board and Im pretty sure I'll run into problems unless
I get an active DVI-D to VGA converter like this:

From what I can tell I need to adapt the HDMI out to DVI-D then

convert it to VGA. Is this correct or is there another way?

Exactly what I'm looking for, Thanks Mike