¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Topics

Digital Projection e-vision 4500

 

Hello all,

I'm looking for a module for the e-vision 4500. Commands are different than the e-vision series module provided in the groups modules file. Does anybody have one? It would be much appreciated.?


Specifically I'm looking how to structure the command for feedback status.


I know the command starts V99G007. The descriptions would be:

0:Reset

1:Standby

2:Operation

3:Cooling


Any idea how to structure the actual command? V99G007:3\x0D


Apologies for being such a noob. Lol.
 

Just did an eVision 4500 the other day, the projector is PJLink compatible, save yourself the hassle and use that instead.

Side note, although the web utility shows that the projector is Room View / ?Crestron Connected compatible, the projector *DOES NOT* support it. Reason being that the projector is a re-branded unit, I believe the baseline chassis is a Vivitek, hence the completely different command protocol.

Hope that helps.

Rich
[email protected]
 

"Just did an eVision 4500 the other day, the projector is PJLink compatible, save yourself the hassle and use that instead"

That's a little bizarre.? I'm working with an E-Vision 7500 right now, and the protocol is completely different than the snipped the OP shared.

We've been connecting IP through HDBaseT connections off DM/DMPS units with zero issues...

? - Chip
 

Chip,

The 7500 I believe is a true DP Projector, the 4500 is their value product and I believe its a rebranded Vivitek (although not 100% certain), I do know that the base chassis is not DP. This is why the protocol is so way out of whack.

Rich
[email protected]
 

"The 7500 I believe is a true DP Projector, the 4500 is their value product and I believe its a rebranded Vivitek (although not 100% certain), I do know that the base chassis is not DP. This is why the protocol is so way out of whack"

That would do it!? Thanks Richard...

? - Chip

1 - 5 of 5