开云体育

Content and Control over HDBT

[email protected] #222062 Got new project. Components are: DM-MD16x16 and NEC NP-PA53UJL Projectors and a CP3 processor. The content and control are over HDBT for all projectors, and I haven’t done controlling devices over HDBT. Any advice?? -thank you!
VA_AVTech All Messages By This Member #222064 I haven't done this, but from what I have seen when you configure your output cards for the receiver you choose HDBaseT Receiver and then just add your serial driver for that device. Im not 100% as I have not done it, but that's what I see. -Chris toggle quoted message Show quoted text On Monday, July 3, 2017, 12:24:08 AM EDT, titoortiz21@... [Crestron] wrote: ? Got new project. Components are: DM-MD16x16 and NEC NP-PA53UJL Projectors and a CP3 processor. The content and control are over HDBT for all projectors, and I haven’t done controlling devices over HDBT. Any advice?? -thank you!
emareyev All Messages By This Member #222065 It's just Ethernet over HDBT, so you need an IP module for the projector or a Crestron Connected Display module from Crestron database. ?Crestron connected features, if built in, may need to be enabled and assigned an IP ID. ?Sometimes you have to convert IP ID value from decimal to hex. toggle quoted message Show quoted text On Jul 3, 2017 12:24 AM, "titoortiz21@... [Crestron]" <Crestron@...> wrote: ? Got new project. Components are: DM-MD16x16 and NEC NP-PA53UJL Projectors and a CP3 processor. The content and control are over HDBT for all projectors, and I haven’t done controlling devices over HDBT. Any advice?? -thank you!

Previous Topic Next Topic