开云体育

Apple TV Voice control

ckangis All Messages By This Member #254122 Hi All, Just checking... Is there any way within SMW systems to do voice control (Searching, etc.) now, other than with Josh.ai?? TIA!
Eric Luckart All Messages By This Member #254123 Look at the Ultimation modules
Gary Miller All Messages By This Member #254124 Crestron has native voice control through the TSR-310, it's a bear to get going but seems reliable so far. toggle quoted message Show quoted text On 7/12/2024 2:14 PM, Eric Luckart via groups.io wrote: Look at the Ultimation modules
Avtar All Messages By This Member #254126 What Gary said. Side note, it works okay on a 3-Series Processor but 4-Series is recommended. https://community.crestron.com/s/article/id-1000132
ckangis All Messages By This Member #254128 Thanks guys!!
ckangis All Messages By This Member #254930 So I'm finally getting around to testing this integration, having just beaten my way to voice control for the Comcast cable boxes... Here's a couple questions: 1. Do we really have to have the processor connected to the MyCrestron?? 2. The demo program comes using the Apple HomeKit v1.0 module. I see that there is a v1.1 module. I assume that I should use the newer version, Yes?? ? TIA!! ?
ckangis All Messages By This Member #254956 On Mon, Sep 30, 2024 at 09:49 PM, ckangis wrote: 1. Do we really have to have the processor connected to the MyCrestron?? 2. The demo program comes using the Apple HomeKit v1.0 module. I see that there is a v1.1 module. I assume that I should use the newer version, Yes?? ? Any experiences with these?? TIA!
Avtar All Messages By This Member #254957 I think the MyCrestron is only for Crestron Home and Use the v1.1 Module.
ckangis All Messages By This Member #254978 Also, Regarding the TSR SubSlots (TSR-310 Buttons and TSR-310 AppleTV Control Reserved Joins), My understanding is that the outputs are interlocked based on whether the ATV Control 'ENABLE' input is high or low. Assuming that this is correct, it would seem that you could duplicate the appropriate signal names on each of the slot outputs for better universality and just raise or lower the ENABLE when you're controlling the Apple TV vs. other AV devices. Does anyone see a problem with this? ? I know that you can (Like the Comcast Voice demo does) use a bunch of OR symbols, but that seems unnecessary...
ckangis All Messages By This Member #255039 So...? ?I'm a week into trying to get this thing working, and hope someone might have some insight... ? 1. I actually had the interface working great using an updated version of the Crestron demo program, and then it just stopped working...:(? It may have been that I accidentally swiped my thumb on the button that is tied to the 'Restore' input on the Homekit module? (Could someone/anyone at Crestron actually finish the work? how can you not P+H a Restore button...) 2. Anyway, no problem, I'll just pair it again... 3. NOTHING I do willl allow this thing to be paired again...NOTHING!!! Adding the Accessory always fails... 4. Hours with Apple and I can now confirm that they really know nothing about homekit, and yes I was at senior support...? Of course this may/probably is a Crestron issue but... 5. I have updated all the Software/Firmware, FD'd All the devices (ATV, CP4, TSR), Tried every way around things, even with a different iPAD/Apple ID, etc... ? Initially, I got a message that said 'Accessory already in another home' when if failed, then after FD, it will say 'Unable to add Accessory'... ? Does anyone have any ideas??? Boy, I really dream of the old days...

Previous Topic Next Topic