开云体育

I know no one uses hard codecs anymore but we are seeing a strange issue. Client has Poly Group G7500 codecs everywhere and we are using the Group Series Driver 4.0 to control. Basically what will happen at completely random times is the module will change from Logged in to Connected (4d to 2d) and never be able to relogin to the processor again without a program reboot. This is using unsecure SSH as the connection. Has anyone ever seen something like this?

I've had that happen too, there is something going on with the SSH connection logic in the S#.?Module 4.0 just gives me status of 2d, can't figure out why without S# code. I'm using a workaround now, I'm using an external SSH module connected to RS232 TX/RX strings of the Poly module.?

"I'm using a workaround now, I'm using an external SSH module connected to RS232 TX/RX strings of the Poly module. "

This is probably going to be your best bet. The Crestron SSH module has gone through many revisions due to this very issue. My guess is the Group Series Driver 4.0 still uses an old version.? We ran into the same issue with the early versions of the Cisco module with the built in SSH connection.