开云体育

Hello,
? ?I have a two-fold question. I have a single button CLW-DIMEX-P installed and my MC3 does see it.

1) How do I raise and lower the light levels using an analog initialize which has a 0% to 100% scale by tens, an analog divmod which takes the result from the analog initialize and makes a quotient (the divisor is set at 1%)
? ? ?I also have an analog equate which takes the quotient from the analog divmod and it makes analog values. I also have a sliding bar under the 0% through 100% buttons.?

2) Or, how can I make lighting presets?

Now, I have to add that my knowlegde of Crestron is limited. I wrote my Crestron program looking at Youtube videos :)?

Thank you for your assistance, dsmith.

You would use an INIT unless you want to send it to a specific light level like 90% or 0% ie ON and OFF, I prefer to use the ANALOG PRESET for this.? Use a ANALOG RAMP to ramp it up and down.

Are you using SIMPL?

probably is easier ir you make a second program exclusive for lighting with d3 pro , and make an Intersystem connection to share the keypads.?

?