Keyboard Shortcuts
Likes
Search
Artnet or sAcn module that receives dmx values from third party lighting software and consoles
¿ªÔÆÌåÓýHi there, does anyone know of either a Art-Net or Sacn simpl windows module that accepts/receives signal from a third system as well as output signal??? I know that there a sAcn module in for series three processors but this only outputs. Hope someone has something. Thank You, Paul Bell ? ? (PH) 0408465561? 28 Ford St Salamander Bay 2317 ? |
|
Maybe I'm not understanding correctly, but it shouldn't be required. If you want a lighting controller AND Crestron to control lights, you can:
A.) Feed the controller into the Crestron program and have the program merely pass the signals through to the sACN connection.? B.) Feed a compatible DMX merger such as a Chauvet NET-X II and use HTP.? If you're asking for a module to "decode" the sACN so you can take analogs and send them to the built-in sACN module, you'll need to sniff the packets, reverse engineer the protocol, and spin one up.? |
¿ªÔÆÌåÓýThe thought when I saw the OP wasn¡¯t so much merging two points of control but perhaps the OP has a venue with Crestron house lighting (or other Crestron-ecosystem-type-things) that they want to be able trigger from the ¡°show¡± lighting control board. (e.g. treating Crestron as the slave/dimmer/fixture in the DMX relationship rather than the controller/master) ? Either way though I¡¯m not sure of anything pre-built in the Artnet/sAcn world since Crestron-as-control is infinitely more common. Both some reverse engineering and careful consideration about how you¡¯re doing the processing on the Crestron side would be needed to make sure you aren¡¯t taxing things in a way that affects the performance of other things the processor may be doing. ? ? In traditional DMX something like a CueServer could be used to go either direction but that just gets messy fast if traditional DMX isn¡¯t already part of the plan. ? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D ? From: [email protected] [mailto:[email protected]]
On Behalf Of Rob
Sent: Friday, July 16, 2021 9:17 AM To: [email protected] Subject: Re: [crestron] Artnet or sAcn module that receives dmx values from third party lighting software and consoles ? Maybe I'm not understanding correctly, but it shouldn't be required. If you want a lighting controller AND Crestron to control lights, you can: |
|
Thanks guys appreciated your thoughts on this, I¡¯ll post some more detail on what I¡¯m trying to achieve later tonight.
toggle quoted message
Show quoted text
Thank you, Paul Bell (PH) 0408465561 28 Ford St, Salamander Bay, NSW 2317 On Jul 16, 2021, at 11:59 PM, Lincoln King-Cliby via groups.io <lincoln@...> wrote: |