¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Topics

Crestron Go iphone testing #crestronapp

 

This is probably? a simple question.

I have a few remotes that are working well ( tsr 302 , tsr 310) as well as crestron touch screens.? My GUI in all of those is established and setup.

I have finally gotten around to programming the GUI for the Crestron Go app on iphones.?? I am wondering if there is a way to test the GUI by running it from VT Pro like you can for all of the crestron remotes and touchscreens.?? When I do try to run the iphone GUI from VT Pro? using run as .. it just opens xpanel and gets stuk at loading interface.

Maybe this isnt possible becuase the crestron go GUI doesn't get compiled to a vtz file?

Thanks
 

I had a pretty lengthy conversation with Crestron TB a few months back about this, and they confirmed it doesn't work.? Their solution was to do a "save as" and select xpanel.??
I know this isn't really a "solution" but hopefully it saves you from wasting more time trying to get it to work.
 

¿ªÔÆÌåÓý

Thanks. ?

I thought as much. ?It¡¯s good to get the confirmation though.?

It¡¯s easy enough to upload it so the processor as well and just use the app on the phone to test as well. I will give the save as xpanel a try as well and see which workflow is better.?

Thanks again.?

Honestly this group is fantastic.?

On 20 Jun 2021, at 9:36 pm, Albert Cunningham <albertlcunningham@...> wrote:

?I had a pretty lengthy conversation with Crestron TB a few months back about this, and they confirmed it doesn't work.? Their solution was to do a "save as" and select xpanel.??
I know this isn't really a "solution" but hopefully it saves you from wasting more time trying to get it to work.

 

I hit the green play triangle, "Run Project As" at the top all the time with mobile projects and it works fine.? If you get a simulator that is blank you have to change the Advanced Attributes in windows to fix the issue.

  1. Right click on the folder containing your VT project
  2. Choose properties
  3. Click advanced
  4. Check "Allow files in this folder to have contents indexed in addition to file properties"
  5. Click ok
  6. Next it will ask you something about propagating to folders inside this one.? Choose yes.

After that the Run As should work.? I've done this a million times and it fixes the issue every time.
 

I just tried Wyatt's fix but it did not work for me.? When I went to change the setting, it was already checked.? So I unchecked it, tried it, didn't work.? Then went back and re-checked the box, tried it again, still no dice.?

Thanks for posting though, I used it all the time before, now like the op it works with everything but the app.?
 

¿ªÔÆÌåÓý

I can report that this fixed the problem for me. ?

Prior to doing this it would sit at loading interface. ?

After wyatts fix when I hit run as it then asked me for the authentication username and password. ?Then the simulator came up on screen.?

Thank you?

On 21 Jun 2021, at 10:24 pm, Wyatt J <wyatt@...> wrote:

?I hit the green play triangle, "Run Project As" at the top all the time with mobile projects and it works fine.? If you get a simulator that is blank you have to change the Advanced Attributes in windows to fix the issue.

  1. Right click on the folder containing your VT project
  2. Choose properties
  3. Click advanced
  4. Check "Allow files in this folder to have contents indexed in addition to file properties"
  5. Click ok
  6. Next it will ask you something about propagating to folders inside this one.? Choose yes.

After that the Run As should work.? I've done this a million times and it fixes the issue every time.

 

Thanks Wyatt,
That actually worked for me also...

If it doesn't work for others, as someone mentioned, try Save As to a 560P as this should render similar to the iPhone...

1 - 7 of 7