开云体育

hi,

i'm trying to send wake on lan command from the crestron.
the computer is in a different subnet, but we managed to connect the networks, so there is a ping between the controller and the computer.
is there a specific command for this ?

thank you,

assaf

Lots more information required.? ?Did you physically just connect the networks?? Are the pc and processor still on different subnets??

I've done WOL before across vlans but had to get the network Admin to setup an IP Helper address.? ?

The magic packet string to send is easy to find.? There are modules on here that work fine.? Your network is the bigger issue.??

thank you for your reply.
the processor and pc connected to the same managed switch , but in different subnets.
i believe the solution must come from the network configuration, but i don't know how.
what is the ip helper address ?
i have a working module for wol in the same subnet.

thank you,

assaf?

An IP Helper address allows you to send broadcast traffic across vlans.? Speak to your network Admin.? They should know how to implement it.? Unfortunately I don't know a great deal about it.? It was actually my clients network Admin that implemented it for me on a job a while back.??

We had 3 crestron processors on one vlan, that had to control over 400 tvs spanning about 8 different vlans.? ?Every TV used WOL to turn on and it all works perfectly.??