开云体育

Studio vs SIMPL+VTPpro

[email protected] All Messages By This Member #235640 So I've been poking around studio for a bit lately. And was wondering if it was a good alternative to using simpl and vtpro. I am fairly new to the whole Crestron ecosystem of tools and would love some advice. Cheers, Santi
Dillon Costanza All Messages By This Member #235641 I could be wrong but I do not think studio can replace vtpro. It can be used to create or edit themes but they would still need to be imported and programmed in vtpro. toggle quoted message Show quoted text On Mon, Jun 8, 2020, 6:38 PM <santiago@...> wrote: So I've been poking around studio for a bit lately. And was wondering if it was a good alternative to using simpl and vtpro. I am fairly new to the whole Crestron ecosystem of tools and would love some advice. Cheers, Santi
Brian Naas All Messages By This Member #235643 Eventually everything will be done through studio. Simpl windows and vt pro are there for the older stuff and to build customs from ground up. But that is all getting or has been added to studio already. You can create a full custom job in? studio now. It just not same process as simpl and vtpro. It is closer to system builder but much more flexable. toggle quoted message Show quoted text On Mon, Jun 8, 2020 at 4:07 PM, Dillon Costanza <dmcostanza1992@...> wrote: I could be wrong but I do not think studio can replace vtpro. It can be used to create or edit themes but they would still need to be imported and programmed in vtpro. On Mon, Jun 8, 2020, 6:38 PM <santiago@...> wrote: So I've been poking around studio for a bit lately. And was wondering if it was a good alternative to using simpl and vtpro. I am fairly new to the whole Crestron ecosystem of tools and would love some advice. Cheers, Santi
eagrubbs All Messages By This Member #235645 Edited Say whaaatttt?? Studio is EOL, finished.
[email protected] All Messages By This Member #235646 Oh OK. I was just confused by all the software they have on offer for programming.?
Steve Kuehn All Messages By This Member #235647 开云体育 One of the other programmers where I work will no longer program in Studio because of the bugs, limitations, and stability issues.? In particular, he says trying to go back and make a minor change in the system at some later date usually lands up corrupting the program were you have to rebuild the system from scratch.? He has since learn to program in SIMPL and much prefers that over studio. At least with System Builder, you could fix bugs by opening it in SIMPL and make a patch.? But at that point, you could never use System Builder again.? But it was a reasonable thing to do with old systems to get them running again.? That isn't possible with Studio.? I myself have never programmed in Studio although I have be called in several times to figure out some bizarre issues.? In the end, they all appeared to be bugs with no easy fix. By like someone else said, Studio is pretty much end of life now.? I would stay clear of it. On 6/8/20 5:03 PM, santiago via groups.io wrote: toggle quoted message Show quoted text So I've been poking around studio for a bit lately. And was wondering if it was a good alternative to using simpl and vtpro. I am fairly new to the whole Crestron ecosystem of tools and would love some advice. Cheers, Santi
Ryan Cunningham All Messages By This Member #235648 开云体育 I went to a Studio two day class a few years ago and it was a hot mess. No one’s programs would work, not even the instructors. It was so terrible that the instructor did not even finish the curriculum for the course and he ended class early. I promptly deleted it from my computer that day and never looked back. SIMPL and VTP Will be around for sometime, even with the eventual progression toward CH5.? Ryan Cunningham? toggle quoted message Show quoted text On Jun 8, 2020, at 7:45 PM, Steve Kuehn <steve@...> wrote: ? One of the other programmers where I work will no longer program in Studio because of the bugs, limitations, and stability issues.? In particular, he says trying to go back and make a minor change in the system at some later date usually lands up corrupting the program were you have to rebuild the system from scratch.? He has since learn to program in SIMPL and much prefers that over studio. At least with System Builder, you could fix bugs by opening it in SIMPL and make a patch.? But at that point, you could never use System Builder again.? But it was a reasonable thing to do with old systems to get them running again.? That isn't possible with Studio.? I myself have never programmed in Studio although I have be called in several times to figure out some bizarre issues.? In the end, they all appeared to be bugs with no easy fix. By like someone else said, Studio is pretty much end of life now.? I would stay clear of it. On 6/8/20 5:03 PM, santiago via groups.io wrote: So I've been poking around studio for a bit lately. And was wondering if it was a good alternative to using simpl and vtpro. I am fairly new to the whole Crestron ecosystem of tools and would love some advice. Cheers, Santi
Rob All Messages By This Member #235656 Studio is EOL and is going to become abandonware.? The idea was for it to supersede SIMPL and VT-Pro-e, but it never really took off and nobody really adopted it because it sucked for numerous reasons.? Still required for creating custom Smart Graphics. But beyond that, SIMPL & VT-Pro-e or C# & HTML5 will be your friend going forward.?

Previous Topic Next Topic