开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Topics

iPhone X Resolution

[email protected]
 

We are beginning to make a VTPro for iPhone X. Can we get guidance on the resolution that we need to work on.


Also is the notch a part of the display or the display resolution begins from below the notch to the bottom of the screen


Thanks



DV
 

开云体育

I see that apps are taking advantage of the full screen, not sure if the crestron app is or can do that. The notch does intrude into that resolution when apps do take advantage of the full resolution. My current projects stop well short of the top and bottom of the phone.?

X

On May 2, 2018, at 4:01 AM, dvakunde@... [Crestron] <Crestron@...> wrote:

?

We are beginning to make a VTPro for iPhone X. Can we get guidance on the resolution that we need to work on.


Also is the notch a part of the display or the display resolution begins from below the notch to the bottom of the screen


Thanks



DV
 

I don't know about the iPhone, but in my experience the Crestron App scales the iPad interface down if you try to use a custom high resolution on newer iPads with retina screens, so your high res interface you worked hard on ends up getting squished and messed up in odd ways and looking like hot garbage until you spend 2 hours scaling it all back down to the standard resolution the VT Pro project supports. I would caution you against using a custom resolution to build an interface until you've tested that elements scale appropriately. I learned this the hard way.

-Stuart
 

If it is an iPhone (any model) then select iPhone 5 as the device.? The app does not, and will not ever, support retina displays.? If you do a custom resolution then you are doing little more than wasting your time.
 

Anything changes on this front in terms of iPhone resolution? In the process of redoing our iPhone interface. Been using the iPhone 5 version in VTP uptil now.
 

No, the Crestron App still uses the iPhone 5 resolution plus it will be letterboxed on iPhone X.
 

Sorry, but a noob question, how do you actually make this? (blue) app work ( free version)?
I am stuck with "connected" and initializing, please wait.. status since day 1.
Project made in VTPRO saved as Crestron App for iPhone 5 (? I have an 8) . sent to RMC3 web server.
In SIMPL, added App module IP-ID5 (where does it prompt you to enter this ID? in blue app anyway). slot 1? user project name: same filename with whats on RMC3 webserver.?
In blue app, set these as- [ hostname: RMC3 ip], [ http:80, ports AB? 41794/96], [passcode:admin (don't remember setting this but put it anyway] , [ use local file :YES]
Is there anything else I'm missing or doing wrong?
 

开云体育

The blue app has been replaced with the silver app.?

Ryan Cunningham?

On Apr 14, 2020, at 7:14 AM, asandoval@... wrote:

?Sorry, but a noob question, how do you actually make this? (blue) app work ( free version)?
I am stuck with "connected" and initializing, please wait.. status since day 1.
Project made in VTPRO saved as Crestron App for iPhone 5 (? I have an 8) . sent to RMC3 web server.
In SIMPL, added App module IP-ID5 (where does it prompt you to enter this ID? in blue app anyway). slot 1? user project name: same filename with whats on RMC3 webserver.?
In blue app, set these as- [ hostname: RMC3 ip], [ http:80, ports AB? 41794/96], [passcode:admin (don't remember setting this but put it anyway] , [ use local file :YES]
Is there anything else I'm missing or doing wrong?

 

Thanks, that did it. I just ignored what was so obvious.
 

开云体育

If you are using the Blue App, it does still work but if Apple breaks the App with a iOS update, Crestron may not fix it.? The Silver app is a newer version that uses Smart Graphics.? But even the Silver app can be broken by a iOS update however it is likely Crestron will come up with an update if it does.? The main concern I have with the Silver App and Smart Graphics is it is flash based and everybody is discontinuing support and even in some cases blocking it.

In your case, since you are using the Blue App and loaded the project to the RMC3, you want to set the following in the App Setup (assuming you used the defaults in your SIMPL program).
use local file: NO
Friendly Name:? [Anything you want here]
IP Address: [key in the IP address of your RMC3 here -- e.g. something like 192.168.1.200]
HTTP: 80
Port A: 41790 [this is the default but can be changed in SIMPL at the symbol at IPID-05]
Port B: [leave this blank in most cases]
Password: [this is the pass code that you keyed into the symbol at IPID-05).
Don't mess with the Advance tab for now.

Make sure that you don't have SSL enabled on your processor -- at least to begin with.? Once you get things working, you can experiment with SSL.

Note the free Blue App is limited to just a few pages.? So when you make your? project in VTPRO, select Panel Type: "Crestron Mobile for Phones".? Do not used the PRO version as the free App will not work with it.

Good luck,
Steve




On 4/14/20 9:18 AM, rpc78crestronio via groups.io wrote:

The blue app has been replaced with the silver app.?

Ryan Cunningham?

On Apr 14, 2020, at 7:14 AM, asandoval@... wrote:

?Sorry, but a noob question, how do you actually make this? (blue) app work ( free version)?
I am stuck with "connected" and initializing, please wait.. status since day 1.
Project made in VTPRO saved as Crestron App for iPhone 5 (? I have an 8) . sent to RMC3 web server.
In SIMPL, added App module IP-ID5 (where does it prompt you to enter this ID? in blue app anyway). slot 1? user project name: same filename with whats on RMC3 webserver.?
In blue app, set these as- [ hostname: RMC3 ip], [ , ports AB? 41794/96], [passcode:admin (don't remember setting this but put it anyway] , [ use local file :YES]
Is there anything else I'm missing or doing wrong?

1 - 10 of 10