¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Ctrl+H rant


Heather Baiman
 

Every now and then I mistype (always when I'm editing a touchpanel in Simpl) and Crestron decides to put a signal name on every join of the touchpanel, which is completely NOT undoable. Today I finally figured out what the mistype is, instead of Ctrl+G so that I can get to a specific join number, I hit the H and I get completely screwed.


Heather Baiman
Electronic Environments
247 W. 37th
New York, NY 10018
Phone (212)997-1110
Fax (212)997-0474


Kool-Aid Drinker
 

Interesting! I knew and used Ctrl-Shift-B for auto-fill (which is
undo-able, and will do ranges), but hadn't encountered Ctrl-Shift-H.
Odd that there are two; odd that they name differently.

Why you include the Shift in you Ctrl-G? Without it, your typo is
harmless.

On Fri, 3 May 2013 15:56:46 +0000, Heather Baiman <heather@...>
wrote:

Every now and then I mistype (always when I'm editing a touchpanel in Simpl) and Crestron
decides to put a signal name on every join of the touchpanel, which is completely NOT
undoable. Today I finally figured out what the mistype is, instead of Ctrl+G so that I can
get to a specific join number, I hit the H and I get completely screwed.


Heather Baiman
Electronic Environments
247 W. 37th
New York, NY 10018
Phone (212)997-1110
Fax (212)997-0474


 

Wow. Didn't know about CTRL+SHIFT+B. I always just held down ENTER so that
it would autoname the signals. Where are these shortcuts listed?


On Fri, May 3, 2013 at 10:23 AM, Kool-Aid Drinker <
herald@...> wrote:

Interesting! I knew and used Ctrl-Shift-B for auto-fill (which is
undo-able, and will do ranges), but hadn't encountered Ctrl-Shift-H.
Odd that there are two; odd that they name differently.

Why you include the Shift in you Ctrl-G? Without it, your typo is
harmless.

On Fri, 3 May 2013 15:56:46 +0000, Heather Baiman <heather@...>
wrote:

Every now and then I mistype (always when I'm editing a touchpanel in
Simpl) and Crestron
decides to put a signal name on every join of the touchpanel, which is
completely NOT
undoable. Today I finally figured out what the mistype is, instead of
Ctrl+G so that I can
get to a specific join number, I hit the H and I get completely screwed.


Heather Baiman
Electronic Environments
247 W. 37th
New York, NY 10018
Phone (212)997-1110
Fax (212)997-0474

------------------------------------




Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links




Heather Baiman
 

Hmm.. pretty sure I was told I had to use Ctrl-Shift-G to get to a join number when this feature first came out, but you are right simply using Ctrl-G works fine.

I forgot to include the Shift in the original email :(

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of Kool-Aid Drinker
Sent: Friday, May 03, 2013 1:24 PM
To: crestron@...
Subject: [Crestron] Re: Ctrl+H rant

Interesting! I knew and used Ctrl-Shift-B for auto-fill (which is
undo-able, and will do ranges), but hadn't encountered Ctrl-Shift-H.
Odd that there are two; odd that they name differently.

Why you include the Shift in you Ctrl-G? Without it, your typo is
harmless.

On Fri, 3 May 2013 15:56:46 +0000, Heather Baiman <heather@...>
wrote:

Every now and then I mistype (always when I'm editing a touchpanel in Simpl) and Crestron
decides to put a signal name on every join of the touchpanel, which is completely NOT
undoable. Today I finally figured out what the mistype is, instead of Ctrl+G so that I can
get to a specific join number, I hit the H and I get completely screwed.


Heather Baiman
Electronic Environments
247 W. 37th
New York, NY 10018
Phone (212)997-1110
Fax (212)997-0474

------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links


Heather Baiman
 

Many are listed in the help if you search for 'shortcut', you'll see a topic for keyboard shortcuts

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of Eric Walters
Sent: Friday, May 03, 2013 1:31 PM
To: Crestron
Subject: Re: [Crestron] Re: Ctrl+H rant

Wow. Didn't know about CTRL+SHIFT+B. I always just held down ENTER so that
it would autoname the signals. Where are these shortcuts listed?


On Fri, May 3, 2013 at 10:23 AM, Kool-Aid Drinker <
herald@...> wrote:

Interesting! I knew and used Ctrl-Shift-B for auto-fill (which is
undo-able, and will do ranges), but hadn't encountered Ctrl-Shift-H.
Odd that there are two; odd that they name differently.

Why you include the Shift in you Ctrl-G? Without it, your typo is
harmless.

On Fri, 3 May 2013 15:56:46 +0000, Heather Baiman <heather@...>
wrote:

Every now and then I mistype (always when I'm editing a touchpanel in
Simpl) and Crestron
decides to put a signal name on every join of the touchpanel, which is
completely NOT
undoable. Today I finally figured out what the mistype is, instead of
Ctrl+G so that I can
get to a specific join number, I hit the H and I get completely screwed.


Heather Baiman
Electronic Environments
247 W. 37th
New York, NY 10018
Phone (212)997-1110
Fax (212)997-0474

------------------------------------




Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links




[Non-text portions of this message have been removed]



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links


 

I have a wallpaper someone posted a while back with all the shortcuts on
it. I can upload it to the files section if anyone is interested. It may
even be there already. On my phone so I cant look to know for sure.

Sent from my eMail.

On May 3, 2013, at 1:33 PM, Heather Baiman <heather@...> wrote:



Many are listed in the help if you search for 'shortcut', you'll see a
topic for keyboard shortcuts

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf
Of Eric Walters
Sent: Friday, May 03, 2013 1:31 PM
To: Crestron
Subject: Re: [Crestron] Re: Ctrl+H rant

Wow. Didn't know about CTRL+SHIFT+B. I always just held down ENTER so that
it would autoname the signals. Where are these shortcuts listed?

On Fri, May 3, 2013 at 10:23 AM, Kool-Aid Drinker <
herald@...> wrote:

Interesting! I knew and used Ctrl-Shift-B for auto-fill (which is
undo-able, and will do ranges), but hadn't encountered Ctrl-Shift-H.
Odd that there are two; odd that they name differently.

Why you include the Shift in you Ctrl-G? Without it, your typo is
harmless.

On Fri, 3 May 2013 15:56:46 +0000, Heather Baiman <heather@...>
wrote:

Every now and then I mistype (always when I'm editing a touchpanel in
Simpl) and Crestron
decides to put a signal name on every join of the touchpanel, which is
completely NOT
undoable. Today I finally figured out what the mistype is, instead of
Ctrl+G so that I can
get to a specific join number, I hit the H and I get completely screwed.


Heather Baiman
Electronic Environments
247 W. 37th
New York, NY 10018
Phone (212)997-1110
Fax (212)997-0474

------------------------------------




Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links



[Non-text portions of this message have been removed]

------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links




[Non-text portions of this message have been removed]


Heath Volmer
 

On May 3, 2013, at 11:30 AM, Eric Walters <sentry07@...> wrote:

Where are these shortcuts listed?
In the same place as the Core 3 documentation...


 

And Tinkerbell.

On Fri, May 3, 2013 at 12:13 PM, Heath Volmer <hvolmer@...> wrote:


On May 3, 2013, at 11:30 AM, Eric Walters <sentry07@...> wrote:

Where are these shortcuts listed?
In the same place as the Core 3 documentation...





------------------------------------




Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links