开云体育

**


Hi all

First time working with this processor. I am having trouble changing the
output routing on this device. When the system first boots up I and change
the output routing to output 2 or 3. But if i change in to output 2
initially I cannot then switch to route to output 3 and vice versa. I am
enabling the output in the module but it seems like that signal is staying
high. Anyone have any ideas?

Have you turn system on on the module. Notjing can be done if the system
is not on.

{Paf}
Le 27 mars 2013 19:48, "lankford.patrick" <lankford.patrick@...> a
茅crit :

**


Hi all

First time working with this processor. I am having trouble changing the
output routing on this device. When the system first boots up I and change
the output routing to output 2 or 3. But if i change in to output 2
initially I cannot then switch to route to output 3 and vice versa. I am
enabling the output in the module but it seems like that signal is staying
high. Anyone have any ideas?

[Non-text portions of this message have been removed]

Yes. That is the first thing I figured out.

--- In Crestron@..., 搁补辫丑补毛濒 Thiffault <raphaelthiffault@> wrote:

Have you turn system on on the module. Notjing can be done if the system
is not on.

{Paf}
Le 27 mars 2013 19:48, "lankford.patrick" <lankford.patrick@> a
茅crit :

**


Hi all

First time working with this processor. I am having trouble changing the
output routing on this device. When the system first boots up I and change
the output routing to output 2 or 3. But if i change in to output 2
initially I cannot then switch to route to output 3 and vice versa. I am
enabling the output in the module but it seems like that signal is staying
high. Anyone have any ideas?

[Non-text portions of this message have been removed]

How are you changing your routing value? I typically run through an init to change values.

--- In Crestron@..., "lankford.patrick" <lankford.patrick@> wrote:

Yes. That is the first thing I figured out.

--- In Crestron@..., 搁补辫丑补毛濒 Thiffault <raphaelthiffault@> wrote:

Have you turn system on on the module. Notjing can be done if the system
is not on.

{Paf}
Le 27 mars 2013 19:48, "lankford.patrick" <lankford.patrick@> a
茅crit :

**


Hi all

First time working with this processor. I am having trouble changing the
output routing on this device. When the system first boots up I and change
the output routing to output 2 or 3. But if i change in to output 2
initially I cannot then switch to route to output 3 and vice versa. I am
enabling the output in the module but it seems like that signal is staying
high. Anyone have any ideas?

[Non-text portions of this message have been removed]

Yes I am running them through an analog init before the go to the module. If I am reading this help file correct the Select_Video_x signal at the top of the module is selecting which output to send the input to? So I would need to send a 0 to that signal t0 clear the output to allow a new output to be selected?

--- In Crestron@..., "Gregg M" <jets_in_2003@> wrote:

How are you changing your routing value? I typically run through an init to change values.

--- In Crestron@..., "lankford.patrick" <lankford.patrick@> wrote:

Yes. That is the first thing I figured out.

--- In Crestron@..., 搁补辫丑补毛濒 Thiffault <raphaelthiffault@> wrote:

Have you turn system on on the module. Notjing can be done if the system
is not on.

{Paf}
Le 27 mars 2013 19:48, "lankford.patrick" <lankford.patrick@> a
茅crit :

**


Hi all

First time working with this processor. I am having trouble changing the
output routing on this device. When the system first boots up I and change
the output routing to output 2 or 3. But if i change in to output 2
initially I cannot then switch to route to output 3 and vice versa. I am
enabling the output in the module but it seems like that signal is staying
high. Anyone have any ideas?

[Non-text portions of this message have been removed]

If you do the routing from the front panel of the dmps does it work?

If you want to sent the input 1 of the dmps to the output 1, you set 1d to
the video 1 output (hdmi). On the left side of the system symbol. The right
side provide you the actual value of that output, by changing the routing
from the front panel, that value is supposed to change.

{Paf}
Le 27 mars 2013 22:00, "lankford.patrick" <lankford.patrick@...> a
茅crit :

**


Yes I am running them through an analog init before the go to the module.
If I am reading this help file correct the Select_Video_x signal at the top
of the module is selecting which output to send the input to? So I would
need to send a 0 to that signal t0 clear the output to allow a new output
to be selected?

--- In Crestron@..., "Gregg M" <jets_in_2003@> wrote:

How are you changing your routing value? I typically run through an init

to change values.

--- In Crestron@..., "lankford.patrick" <lankford.patrick@>

wrote:

Yes. That is the first thing I figured out.

--- In Crestron@..., 搁补辫丑补毛濒 Thiffault <raphaelthiffault@>

wrote:

Have you turn system on on the module. Notjing can be done if the

system

is not on.

{Paf}
Le 27 mars 2013 19:48, "lankford.patrick" <lankford.patrick@> a
茅crit :

**


Hi all

First time working with this processor. I am having trouble

changing the

output routing on this device. When the system first boots up I

and change

the output routing to output 2 or 3. But if i change in to output 2
initially I cannot then switch to route to output 3 and vice

versa. I am

enabling the output in the module but it seems like that signal is

staying

high. Anyone have any ideas?

[Non-text portions of this message have been removed]

Yes. I can route just fine from the front panel. I have inputs going into analog init with values set for 1d, 2d, 3d and so forth. Those then go to outputs in the module for video HDMI out 1 and 2 and another analog init for DM out as well. When output is selected I can switch the inputs from the program in the touch panel and all is good. But when I change sources to send inputs to DM out 3 the switching does not occur. As soon as I route outputs again from the front panel I can switch all over again.

--- In Crestron@..., 搁补辫丑补毛濒 Thiffault <raphaelthiffault@> wrote:

If you do the routing from the front panel of the dmps does it work?

If you want to sent the input 1 of the dmps to the output 1, you set 1d to
the video 1 output (hdmi). On the left side of the system symbol. The right
side provide you the actual value of that output, by changing the routing
from the front panel, that value is supposed to change.

{Paf}
Le 27 mars 2013 22:00, "lankford.patrick" <lankford.patrick@> a
茅crit :

**


Yes I am running them through an analog init before the go to the module.
If I am reading this help file correct the Select_Video_x signal at the top
of the module is selecting which output to send the input to? So I would
need to send a 0 to that signal t0 clear the output to allow a new output
to be selected?

--- In Crestron@..., "Gregg M" <jets_in_2003@> wrote:

How are you changing your routing value? I typically run through an init

to change values.

--- In Crestron@..., "lankford.patrick" <lankford.patrick@>

wrote:

Yes. That is the first thing I figured out.

--- In Crestron@..., 搁补辫丑补毛濒 Thiffault <raphaelthiffault@>

wrote:

Have you turn system on on the module. Notjing can be done if the

system

is not on.

{Paf}
Le 27 mars 2013 19:48, "lankford.patrick" <lankford.patrick@> a
茅crit :

**


Hi all

First time working with this processor. I am having trouble

changing the

output routing on this device. When the system first boots up I

and change

the output routing to output 2 or 3. But if i change in to output 2
initially I cannot then switch to route to output 3 and vice

versa. I am

enabling the output in the module but it seems like that signal is

staying

high. Anyone have any ideas?

[Non-text portions of this message have been removed]

When you route signal to the DM out does the FB correspond to the value being sent?
Also if you are running seperate inits for all your outputs you can route a working one (HDMI out 1 or 2) to the DM out to test whether its a code mistake.
Finally in debugger just change the value of that Select_Video_DM_Out_3 line and see if the source changes on your display

--- In Crestron@..., "lankford.patrick" <lankford.patrick@> wrote:

Yes. I can route just fine from the front panel. I have inputs going into analog init with values set for 1d, 2d, 3d and so forth. Those then go to outputs in the module for video HDMI out 1 and 2 and another analog init for DM out as well. When output is selected I can switch the inputs from the program in the touch panel and all is good. But when I change sources to send inputs to DM out 3 the switching does not occur. As soon as I route outputs again from the front panel I can switch all over again.

--- In Crestron@..., 搁补辫丑补毛濒 Thiffault <raphaelthiffault@> wrote:

If you do the routing from the front panel of the dmps does it work?

If you want to sent the input 1 of the dmps to the output 1, you set 1d to
the video 1 output (hdmi). On the left side of the system symbol. The right
side provide you the actual value of that output, by changing the routing
from the front panel, that value is supposed to change.

{Paf}
Le 27 mars 2013 22:00, "lankford.patrick" <lankford.patrick@> a
茅crit :

**


Yes I am running them through an analog init before the go to the module.
If I am reading this help file correct the Select_Video_x signal at the top
of the module is selecting which output to send the input to? So I would
need to send a 0 to that signal t0 clear the output to allow a new output
to be selected?

--- In Crestron@..., "Gregg M" <jets_in_2003@> wrote:

How are you changing your routing value? I typically run through an init

to change values.

--- In Crestron@..., "lankford.patrick" <lankford.patrick@>

wrote:

Yes. That is the first thing I figured out.

--- In Crestron@..., 搁补辫丑补毛濒 Thiffault <raphaelthiffault@>

wrote:

Have you turn system on on the module. Notjing can be done if the

system

is not on.

{Paf}
Le 27 mars 2013 19:48, "lankford.patrick" <lankford.patrick@> a
茅crit :

**


Hi all

First time working with this processor. I am having trouble

changing the

output routing on this device. When the system first boots up I

and change

the output routing to output 2 or 3. But if i change in to output 2
initially I cannot then switch to route to output 3 and vice

versa. I am

enabling the output in the module but it seems like that signal is

staying

high. Anyone have any ideas?

[Non-text portions of this message have been removed]

Why use an IL and an INIT? Why not feed the INIT with the button press,
and EQU the DMPS output FB for your button feedback?


On Thu, Mar 28, 2013 at 11:42 AM, <cochoa2716@...> wrote:

**


I have done many of these systems, and I can tell you the way I deal with
it...

Button press 1-6 (inputs)

to Interlock 1-6 to 1-6fb

1-6fb to Analog Initialize 0-6d to Select Video HDMI Out 1, Select Video
HDMI Out 2, Select Video DM Out 3, and Select Video DM Out 4 on the Module.

I do the same for Audio matching the inputs of the video.

I have a Power button that clears the interlock as well asn video and
audio.

Hope this helps


--- In Crestron@..., "Gregg M" <jets_in_2003@> wrote:

When you route signal to the DM out does the FB correspond to the value

being sent?

Also if you are running seperate inits for all your outputs you can

route a working one (HDMI out 1 or 2) to the DM out to test whether its a
code mistake.

Finally in debugger just change the value of that Select_Video_DM_Out_3

line and see if the source changes on your display

--- In Crestron@..., "lankford.patrick" <lankford.patrick@>

wrote:

Yes. I can route just fine from the front panel. I have inputs going

into analog init with values set for 1d, 2d, 3d and so forth. Those then go
to outputs in the module for video HDMI out 1 and 2 and another analog init
for DM out as well. When output is selected I can switch the inputs from
the program in the touch panel and all is good. But when I change sources
to send inputs to DM out 3 the switching does not occur. As soon as I route
outputs again from the front panel I can switch all over again.

--- In Crestron@..., Rapha脙芦l Thiffault <raphaelthiffault@>

wrote:

If you do the routing from the front panel of the dmps does it work?

If you want to sent the input 1 of the dmps to the output 1, you set

1d to

the video 1 output (hdmi). On the left side of the system symbol.

The right

side provide you the actual value of that output, by changing the

routing

from the front panel, that value is supposed to change.

{Paf}
Le 27 mars 2013 22:00, "lankford.patrick" <lankford.patrick@> a
脙漏crit :

**


Yes I am running them through an analog init before the go to the

module.

If I am reading this help file correct the Select_Video_x signal

at the top

of the module is selecting which output to send the input to? So I

would

need to send a 0 to that signal t0 clear the output to allow a new

output

to be selected?

--- In Crestron@..., "Gregg M" <jets_in_2003@> wrote:

How are you changing your routing value? I typically run through

an init

to change values.

--- In Crestron@..., "lankford.patrick"

<lankford.patrick@>

wrote:

Yes. That is the first thing I figured out.

--- In Crestron@..., Rapha脙芦l Thiffault

<raphaelthiffault@>

wrote:

Have you turn system on on the module. Notjing can be done

if the

system

is not on.

{Paf}
Le 27 mars 2013 19:48, "lankford.patrick" <lankford.patrick@>

a

脙漏crit :

**


Hi all

First time working with this processor. I am having trouble

changing the

output routing on this device. When the system first boots

up I

and change

the output routing to output 2 or 3. But if i change in to

output 2

initially I cannot then switch to route to output 3 and

vice

versa. I am

enabling the output in the module but it seems like that

signal is

staying

high. Anyone have any ideas?

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

Yes. I can route just fine from the front panel. I have inputs going into analog init with values set for 1d, 2d, 3d and so forth. Those then go to outputs in the module for video HDMI out 1 and 2 and another analog init for DM out as well. When output is selected I can switch the inputs from the program in the touch panel and all is good. But when I change sources to send inputs to DM out 3 the switching does not occur. As soon as I route outputs again from the front panel I can switch all over again.

--- In Crestron@..., 搁补辫丑补毛濒 Thiffault <raphaelthiffault@> wrote:

If you do the routing from the front panel of the dmps does it work?

If you want to sent the input 1 of the dmps to the output 1, you set 1d to
the video 1 output (hdmi). On the left side of the system symbol. The right
side provide you the actual value of that output, by changing the routing
from the front panel, that value is supposed to change.

{Paf}
Le 27 mars 2013 22:00, "lankford.patrick" <lankford.patrick@> a
茅crit :

**


Yes I am running them through an analog init before the go to the module.
If I am reading this help file correct the Select_Video_x signal at the top
of the module is selecting which output to send the input to? So I would
need to send a 0 to that signal t0 clear the output to allow a new output
to be selected?

--- In Crestron@..., "Gregg M" <jets_in_2003@> wrote:

How are you changing your routing value? I typically run through an init

to change values.

--- In Crestron@..., "lankford.patrick" <lankford.patrick@>

wrote:

Yes. That is the first thing I figured out.

--- In Crestron@..., 搁补辫丑补毛濒 Thiffault <raphaelthiffault@>

wrote:

Have you turn system on on the module. Notjing can be done if the

system

is not on.

{Paf}
Le 27 mars 2013 19:48, "lankford.patrick" <lankford.patrick@> a
茅crit :

**


Hi all

First time working with this processor. I am having trouble

changing the

output routing on this device. When the system first boots up I

and change

the output routing to output 2 or 3. But if i change in to output 2
initially I cannot then switch to route to output 3 and vice

versa. I am

enabling the output in the module but it seems like that signal is

staying

high. Anyone have any ideas?

[Non-text portions of this message have been removed]

Why use an IL and an INIT? Why not feed the INIT with the button press,
and EQU the DMPS output FB for your button feedback?


On Thu, Mar 28, 2013 at 11:42 AM, <cochoa2716@...> wrote:

**


I have done many of these systems, and I can tell you the way I deal with
it...

Button press 1-6 (inputs)

to Interlock 1-6 to 1-6fb

1-6fb to Analog Initialize 0-6d to Select Video HDMI Out 1, Select Video
HDMI Out 2, Select Video DM Out 3, and Select Video DM Out 4 on the Module.

I do the same for Audio matching the inputs of the video.

I have a Power button that clears the interlock as well asn video and
audio.

Hope this helps


--- In Crestron@..., "Gregg M" <jets_in_2003@> wrote:

When you route signal to the DM out does the FB correspond to the value

being sent?

Also if you are running seperate inits for all your outputs you can

route a working one (HDMI out 1 or 2) to the DM out to test whether its a
code mistake.

Finally in debugger just change the value of that Select_Video_DM_Out_3

line and see if the source changes on your display

--- In Crestron@..., "lankford.patrick" <lankford.patrick@>

wrote:

Yes. I can route just fine from the front panel. I have inputs going

into analog init with values set for 1d, 2d, 3d and so forth. Those then go
to outputs in the module for video HDMI out 1 and 2 and another analog init
for DM out as well. When output is selected I can switch the inputs from
the program in the touch panel and all is good. But when I change sources
to send inputs to DM out 3 the switching does not occur. As soon as I route
outputs again from the front panel I can switch all over again.

--- In Crestron@..., Rapha脙芦l Thiffault <raphaelthiffault@>

wrote:

If you do the routing from the front panel of the dmps does it work?

If you want to sent the input 1 of the dmps to the output 1, you set

1d to

the video 1 output (hdmi). On the left side of the system symbol.

The right

side provide you the actual value of that output, by changing the

routing

from the front panel, that value is supposed to change.

{Paf}
Le 27 mars 2013 22:00, "lankford.patrick" <lankford.patrick@> a
脙漏crit :

**


Yes I am running them through an analog init before the go to the

module.

If I am reading this help file correct the Select_Video_x signal

at the top

of the module is selecting which output to send the input to? So I

would

need to send a 0 to that signal t0 clear the output to allow a new

output

to be selected?

--- In Crestron@..., "Gregg M" <jets_in_2003@> wrote:

How are you changing your routing value? I typically run through

an init

to change values.

--- In Crestron@..., "lankford.patrick"

<lankford.patrick@>

wrote:

Yes. That is the first thing I figured out.

--- In Crestron@..., Rapha脙芦l Thiffault

<raphaelthiffault@>

wrote:

Have you turn system on on the module. Notjing can be done

if the

system

is not on.

{Paf}
Le 27 mars 2013 19:48, "lankford.patrick" <lankford.patrick@>

a

脙漏crit :

**


Hi all

First time working with this processor. I am having trouble

changing the

output routing on this device. When the system first boots

up I

and change

the output routing to output 2 or 3. But if i change in to

output 2

initially I cannot then switch to route to output 3 and

vice

versa. I am

enabling the output in the module but it seems like that

signal is

staying

high. Anyone have any ideas?

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

EQU would require more steps than just using the IL.