¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Topics

x-gen question

 

I have a cnmsx-av with an enet+ card. Simpl will allow me to use the "iPad interface to control system via TCP" symbols. Does anyone know if this will still work with the new app that is for the iPad and iPhone. Or if you have done this on an xgen and how it worked out for you. I plan on doing an xpanel, iPad/iPhone and a cresnet panel.

This is for my dad at the church my parents attend. Dad does the sound and video stuff there and the church does not have a lot of money, so I am pulling stuff that I have had sitting for years and donating. Looks like I am losing a door stop. On a side note, email me if you have a cresnet panel that you want to get rid for cheap and let me know a price. I just want it as a back up control point.
 

Anyone?

I will dig out the processor this weekend and give it a try and let you know. But am I the only one to want to do it on an xgen?

--- In Crestron@..., "eagrubbs" wrote:

I have a cnmsx-av with an enet+ card. Simpl will allow me to use the "iPad interface to control system via TCP" symbols. Does anyone know if this will still work with the new app that is for the iPad and iPhone. Or if you have done this on an xgen and how it worked out for you. I plan on doing an xpanel, iPad/iPhone and a cresnet panel.

This is for my dad at the church my parents attend. Dad does the sound and video stuff there and the church does not have a lot of money, so I am pulling stuff that I have had sitting for years and donating. Looks like I am losing a door stop. On a side note, email me if you have a cresnet panel that you want to get rid for cheap and let me know a price. I just want it as a back up control point.
 

I have this same configuration and although you?re able to drop the old
iPad symbol at enet+ card, you?ll receiver a error when you compile the
program.
It?s a bug and you can't the same with the old iPhone symbol.

Best regards,
Rafael Costa

Em 01/02/2013 21:48, eagrubbs escreveu:

Anyone?

I will dig out the processor this weekend and give it a try and let
you know. But am I the only one to want to do it on an xgen?

--- In Crestron@... <mailto:Crestron%40yahoogroups.com>,
"eagrubbs" wrote:

I have a cnmsx-av with an enet+ card. Simpl will allow me to use the
"iPad interface to control system via TCP" symbols. Does anyone know
if this will still work with the new app that is for the iPad and
iPhone. Or if you have done this on an xgen and how it worked out for
you. I plan on doing an xpanel, iPad/iPhone and a cresnet panel.

This is for my dad at the church my parents attend. Dad does the
sound and video stuff there and the church does not have a lot of
money, so I am pulling stuff that I have had sitting for years and
donating. Looks like I am losing a door stop. On a side note, email me
if you have a cresnet panel that you want to get rid for cheap and let
me know a price. I just want it as a back up control point.


[Non-text portions of this message have been removed]
 

I have this same configuration and although you?re able to drop the old
iPad symbol at enet+ card, you?ll receiver a error when you compile the
program.
It?s a bug and you can't do the same with the old iPhone symbol.

Best regards,
Rafael Costa

Em 01/02/2013 21:48, eagrubbs escreveu:

Anyone?

I will dig out the processor this weekend and give it a try and let
you know. But am I the only one to want to do it on an xgen?

--- In Crestron@... <mailto:Crestron%40yahoogroups.com>,
"eagrubbs" wrote:

I have a cnmsx-av with an enet+ card. Simpl will allow me to use the
"iPad interface to control system via TCP" symbols. Does anyone know
if this will still work with the new app that is for the iPad and
iPhone. Or if you have done this on an xgen and how it worked out for
you. I plan on doing an xpanel, iPad/iPhone and a cresnet panel.

This is for my dad at the church my parents attend. Dad does the
sound and video stuff there and the church does not have a lot of
money, so I am pulling stuff that I have had sitting for years and
donating. Looks like I am losing a door stop. On a side note, email me
if you have a cresnet panel that you want to get rid for cheap and let
me know a price. I just want it as a back up control point.


[Non-text portions of this message have been removed]
 

I should have known there was something. I never even considered trying to compile it, but after your post I tried. It just doesn't give an error or two, it gives a frickin' book with chapters missing.

--- In Crestron@..., Rafael Costa wrote:

I have this same configuration and although you?re able to drop the old
iPad symbol at enet+ card, you?ll receiver a error when you compile the
program.
It?s a bug and you can't do the same with the old iPhone symbol.

Best regards,
Rafael Costa

Em 01/02/2013 21:48, eagrubbs escreveu:

Anyone?

I will dig out the processor this weekend and give it a try and let
you know. But am I the only one to want to do it on an xgen?

--- In Crestron@... ,
"eagrubbs" wrote:

I have a cnmsx-av with an enet+ card. Simpl will allow me to use the
"iPad interface to control system via TCP" symbols. Does anyone know
if this will still work with the new app that is for the iPad and
iPhone. Or if you have done this on an xgen and how it worked out for
you. I plan on doing an xpanel, iPad/iPhone and a cresnet panel.

This is for my dad at the church my parents attend. Dad does the
sound and video stuff there and the church does not have a lot of
money, so I am pulling stuff that I have had sitting for years and
donating. Looks like I am losing a door stop. On a side note, email me
if you have a cresnet panel that you want to get rid for cheap and let
me know a price. I just want it as a back up control point.


[Non-text portions of this message have been removed]

1 - 5 of 5