开云体育

I can't seem to find any specifics on how to run programs from a USB drive on an MC3. Can anyone help me out?

If you have a program loaded on a USB drive via toolbox as program(App) X,
then the MC3 will automatically boot it in favor of any program loaded to
the internal memory at that slot.

You can use the SYSTEMCONTROL slot on any other program to manually
start/stop register/unregister programs as well.

I'm just working on a large project with multiple programs running off USB
drives that get switched over to the slave in the even the master MC3
fails. Works surprisingly well actually...

Send me a direct email if you need more info.

-Neil

On Tue, Sep 18, 2012 at 11:47 AM, Anthony Desimone <
anthony_desimone@...> wrote:

**


I can't seem to find any specifics on how to run programs from a USB drive
on an MC3. Can anyone help me out?

[Non-text portions of this message have been removed]

So it's just like loading to compact flash on a 2-series?

Pretty much. Except you can have several programs (all 10 if you wanted) run of RM. make sure when loading from toolbox you select the slot and compact flash as the destination.

-Neil Dorin
On 2012-09-18, at 11:56 AM, "Anthony Desimone" <anthony_desimone@...> wrote:

So it's just like loading to compact flash on a 2-series?

--- In Crestron@..., Neil Dorin <neildorin@...> wrote:

If you have a program loaded on a USB drive via toolbox as program(App) X,
then the MC3 will automatically boot it in favor of any program loaded to
the internal memory at that slot.

You can use the SYSTEMCONTROL slot on any other program to manually
start/stop register/unregister programs as well.

I'm just working on a large project with multiple programs running off USB
drives that get switched over to the slave in the even the master MC3
fails. Works surprisingly well actually...

Send me a direct email if you need more info.

-Neil

On Tue, Sep 18, 2012 at 11:47 AM, Anthony Desimone <
anthony_desimone@...> wrote:

**


I can't seem to find any specifics on how to run programs from a USB drive
on an MC3. Can anyone help me out?

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

Also. If you have a program specified as slot 1 and another specified as slot 1 on RM it will boot the RM program first (then RM2 if you have a second USB drive) then internal memory.

-Neil Dorin
On 2012-09-18, at 11:56 AM, "Anthony Desimone" <anthony_desimone@...> wrote:

So it's just like loading to compact flash on a 2-series?

--- In Crestron@..., Neil Dorin <neildorin@...> wrote:

If you have a program loaded on a USB drive via toolbox as program(App) X,
then the MC3 will automatically boot it in favor of any program loaded to
the internal memory at that slot.

You can use the SYSTEMCONTROL slot on any other program to manually
start/stop register/unregister programs as well.

I'm just working on a large project with multiple programs running off USB
drives that get switched over to the slave in the even the master MC3
fails. Works surprisingly well actually...

Send me a direct email if you need more info.

-Neil

On Tue, Sep 18, 2012 at 11:47 AM, Anthony Desimone <
anthony_desimone@...> wrote:

**


I can't seem to find any specifics on how to run programs from a USB drive
on an MC3. Can anyone help me out?

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]